[PATCH V5 2/6] dt-bindings: w1: Add DS2482/DS2484 I2C to 1-W bridges

[Stefan Wahren]

Hi Greg,

Am 04.04.23 um 15:39 schrieb Rob Herring:
> On Tue, Apr 04, 2023 at 10:02:39AM +0200, Stefan Wahren wrote:
>> This adds a dedicated devicetree binding for the Maxim DS2482/DS2484
>> I2C to 1-W bridges, which can be extended later for further features
>> (e.g. sleep mode control GPIO). Since one wire is a bus, child nodes
>> needs to be allowed here.
>>
>> Signed-off-by: Stefan Wahren <stefan.wahren at chargebyte.com>
>> ---
>>   .../devicetree/bindings/w1/maxim,ds2482.yaml  | 44 +++++++++++++++++++
>>   1 file changed, 44 insertions(+)
>>   create mode 100644 Documentation/devicetree/bindings/w1/maxim,ds2482.yaml
> 
> Reviewed-by: Rob Herring <robh at kernel.org>

Shawn Guo applied all patches from this series [1] except of this one 
and patch 3, which probably should go via your 1-w tree?

Unfortunately no feedback from Evgeniy so far. Should i resend these two 
patches for you?

Best regards
Stefan

[1] - 
https://lore.kernel.org/linux-arm-kernel/20230404080243.9613-1-stefan.wahren@chargebyte.com/T/

> 
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel at lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel