[PATCH V4 2/6] dt-bindings: w1: Add DS2482/DS2484 I2C to 1-W bridges

[Krzysztof Kozlowski]

On 31/03/2023 23:08, Stefan Wahren wrote:
> Even this binding look trivial, the actual hardware supports more
> features (e.g. sleep mode control GPIO). So add this as a dedicated
> devicetree binding for the Maxim DS2482/DS2484 I2C to 1-W bridges,
> which can be extended later.
> 
> Signed-off-by: Stefan Wahren <stefan.wahren at chargebyte.com>
> ---
>  .../devicetree/bindings/w1/maxim,ds2482.yaml  | 43 +++++++++++++++++++
>  1 file changed, 43 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/w1/maxim,ds2482.yaml
> 
> diff --git a/Documentation/devicetree/bindings/w1/maxim,ds2482.yaml b/Documentation/devicetree/bindings/w1/maxim,ds2482.yaml
> new file mode 100644
> index 000000000000..fd692a3a7400
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/w1/maxim,ds2482.yaml
> @@ -0,0 +1,43 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---

This is still incomplete as it does not allow children, but you
mentioned it in commit msg and other two bindings are limited as well,
so sounds ok:

Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski at linaro.org>

Best regards,
Krzysztof