[PATCH V2 06/15] arm64: dts: imx8mp-evk: enable fspi nor on imx8mp evk

[Marco Felsch]

On 22-10-24, Peng Fan (OSS) wrote:
> From: Han Xu <han.xu at nxp.com>
> 
> enable fspi nor on imx8mp evk dts
> 
> Reviewed-by: Frank Li <frank.li at nxp.com>
> Signed-off-by: Han Xu <han.xu at nxp.com>
> Signed-off-by: Peng Fan <peng.fan at nxp.com>

LGTM, feel free to add my:

Reviewed-by: Marco Felsch <m.felsch at pengutronix.de>

> ---
>  arch/arm64/boot/dts/freescale/imx8mp-evk.dts | 25 ++++++++++++++++++++
>  1 file changed, 25 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/freescale/imx8mp-evk.dts b/arch/arm64/boot/dts/freescale/imx8mp-evk.dts
> index b8a7de87ce4c..54dfac4ac63b 100644
> --- a/arch/arm64/boot/dts/freescale/imx8mp-evk.dts
> +++ b/arch/arm64/boot/dts/freescale/imx8mp-evk.dts
> @@ -85,6 +85,20 @@ reg_usdhc2_vmmc: regulator-usdhc2 {
>  	};
>  };
>  
> +&flexspi {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_flexspi0>;
> +	status = "okay";
> +
> +	flash at 0 {
> +		compatible = "jedec,spi-nor";
> +		reg = <0>;
> +		spi-max-frequency = <80000000>;
> +		spi-tx-bus-width = <1>;
> +		spi-rx-bus-width = <4>;
> +	};
> +};
> +
>  &A53_0 {
>  	cpu-supply = <&reg_arm>;
>  };
> @@ -567,6 +581,17 @@ MX8MP_IOMUXC_SAI2_MCLK__GPIO4_IO27      0x154   /* CAN2_STBY */
>  		>;
>  	};
>  
> +	pinctrl_flexspi0: flexspi0grp {
> +		fsl,pins = <
> +			MX8MP_IOMUXC_NAND_ALE__FLEXSPI_A_SCLK           0x1c2
> +			MX8MP_IOMUXC_NAND_CE0_B__FLEXSPI_A_SS0_B        0x82
> +			MX8MP_IOMUXC_NAND_DATA00__FLEXSPI_A_DATA00      0x82
> +			MX8MP_IOMUXC_NAND_DATA01__FLEXSPI_A_DATA01      0x82
> +			MX8MP_IOMUXC_NAND_DATA02__FLEXSPI_A_DATA02      0x82
> +			MX8MP_IOMUXC_NAND_DATA03__FLEXSPI_A_DATA03      0x82
> +		>;
> +	};
> +
>  	pinctrl_gpio_led: gpioledgrp {
>  		fsl,pins = <
>  			MX8MP_IOMUXC_NAND_READY_B__GPIO3_IO16	0x140
> -- 
> 2.37.1
> 
> 
>