[PATCH 02/11] arm64: dts: ti: k3-am65: Enable I2C nodes at the board level

[Andrew Davis]

I2C nodes defined in the top-level AM65x SoC dtsi files are incomplete
and will not be functional unless they are extended with pinmux
information.

As the pinmux is only known at the board integration level, these
nodes should only be enabled when provided with this information.

Disable the I2C nodes in the dtsi files and only enable the ones that
are actually pinned out on a given board.

Signed-off-by: Andrew Davis <afd at ti.com>
---
 arch/arm64/boot/dts/ti/k3-am65-iot2050-common.dtsi | 6 ++++++
 arch/arm64/boot/dts/ti/k3-am65-main.dtsi           | 4 ++++
 arch/arm64/boot/dts/ti/k3-am65-mcu.dtsi            | 1 +
 arch/arm64/boot/dts/ti/k3-am65-wakeup.dtsi         | 1 +
 arch/arm64/boot/dts/ti/k3-am654-base-board.dts     | 9 +++++++++
 5 files changed, 21 insertions(+)

diff --git a/arch/arm64/boot/dts/ti/k3-am65-iot2050-common.dtsi b/arch/arm64/boot/dts/ti/k3-am65-iot2050-common.dtsi
index 7b3087c19141c..945a8a70332e9 100644
--- a/arch/arm64/boot/dts/ti/k3-am65-iot2050-common.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am65-iot2050-common.dtsi
@@ -411,12 +411,14 @@ &db9_com_mode_pins_default
 };
 
 &wkup_i2c0 {
+	status = "okay";
 	pinctrl-names = "default";
 	pinctrl-0 = <&wkup_i2c0_pins_default>;
 	clock-frequency = <400000>;
 };
 
 &mcu_i2c0 {
+	status = "okay";
 	pinctrl-names = "default";
 	pinctrl-0 = <&mcu_i2c0_pins_default>;
 	clock-frequency = <400000>;
@@ -476,6 +478,7 @@ pcal9535_3: gpio at 25 {
 };
 
 &main_i2c0 {
+	status = "okay";
 	pinctrl-names = "default";
 	pinctrl-0 = <&main_i2c0_pins_default>;
 	clock-frequency = <400000>;
@@ -493,18 +496,21 @@ eeprom: eeprom at 54 {
 };
 
 &main_i2c1 {
+	status = "okay";
 	pinctrl-names = "default";
 	pinctrl-0 = <&main_i2c1_pins_default>;
 	clock-frequency = <400000>;
 };
 
 &main_i2c2 {
+	status = "okay";
 	pinctrl-names = "default";
 	pinctrl-0 = <&main_i2c2_pins_default>;
 	clock-frequency = <400000>;
 };
 
 &main_i2c3 {
+	status = "okay";
 	pinctrl-names = "default";
 	pinctrl-0 = <&main_i2c3_pins_default>;
 	clock-frequency = <400000>;
diff --git a/arch/arm64/boot/dts/ti/k3-am65-main.dtsi b/arch/arm64/boot/dts/ti/k3-am65-main.dtsi
index ae414f5d83822..feef5fdb46886 100644
--- a/arch/arm64/boot/dts/ti/k3-am65-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am65-main.dtsi
@@ -159,6 +159,7 @@ main_i2c0: i2c at 2000000 {
 		clock-names = "fck";
 		clocks = <&k3_clks 110 1>;
 		power-domains = <&k3_pds 110 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
 	};
 
 	main_i2c1: i2c at 2010000 {
@@ -170,6 +171,7 @@ main_i2c1: i2c at 2010000 {
 		clock-names = "fck";
 		clocks = <&k3_clks 111 1>;
 		power-domains = <&k3_pds 111 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
 	};
 
 	main_i2c2: i2c at 2020000 {
@@ -181,6 +183,7 @@ main_i2c2: i2c at 2020000 {
 		clock-names = "fck";
 		clocks = <&k3_clks 112 1>;
 		power-domains = <&k3_pds 112 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
 	};
 
 	main_i2c3: i2c at 2030000 {
@@ -192,6 +195,7 @@ main_i2c3: i2c at 2030000 {
 		clock-names = "fck";
 		clocks = <&k3_clks 113 1>;
 		power-domains = <&k3_pds 113 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
 	};
 
 	ecap0: pwm at 3100000 {
diff --git a/arch/arm64/boot/dts/ti/k3-am65-mcu.dtsi b/arch/arm64/boot/dts/ti/k3-am65-mcu.dtsi
index bb70097693802..dc0f439d2dacb 100644
--- a/arch/arm64/boot/dts/ti/k3-am65-mcu.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am65-mcu.dtsi
@@ -47,6 +47,7 @@ mcu_i2c0: i2c at 40b00000 {
 		clock-names = "fck";
 		clocks = <&k3_clks 114 1>;
 		power-domains = <&k3_pds 114 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
 	};
 
 	mcu_spi0: spi at 40300000 {
diff --git a/arch/arm64/boot/dts/ti/k3-am65-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-am65-wakeup.dtsi
index bbe31532f984b..fd2b998ebddc4 100644
--- a/arch/arm64/boot/dts/ti/k3-am65-wakeup.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am65-wakeup.dtsi
@@ -66,6 +66,7 @@ wkup_i2c0: i2c at 42120000 {
 		clock-names = "fck";
 		clocks = <&k3_clks 115 1>;
 		power-domains = <&k3_pds 115 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
 	};
 
 	intr_wkup_gpio: interrupt-controller at 42200000 {
diff --git a/arch/arm64/boot/dts/ti/k3-am654-base-board.dts b/arch/arm64/boot/dts/ti/k3-am654-base-board.dts
index 956e9bc946b5f..991a8559b4c3b 100644
--- a/arch/arm64/boot/dts/ti/k3-am654-base-board.dts
+++ b/arch/arm64/boot/dts/ti/k3-am654-base-board.dts
@@ -284,6 +284,7 @@ &main_uart0 {
 };
 
 &wkup_i2c0 {
+	status = "okay";
 	pinctrl-names = "default";
 	pinctrl-0 = <&wkup_i2c0_pins_default>;
 	clock-frequency = <400000>;
@@ -302,7 +303,13 @@ pca9554: gpio at 39 {
 	};
 };
 
+&mcu_i2c0 {
+	status = "okay";
+	/* Default pinmux */
+};
+
 &main_i2c0 {
+	status = "okay";
 	pinctrl-names = "default";
 	pinctrl-0 = <&main_i2c0_pins_default>;
 	clock-frequency = <400000>;
@@ -316,12 +323,14 @@ pca9555: gpio at 21 {
 };
 
 &main_i2c1 {
+	status = "okay";
 	pinctrl-names = "default";
 	pinctrl-0 = <&main_i2c1_pins_default>;
 	clock-frequency = <400000>;
 };
 
 &main_i2c2 {
+	status = "okay";
 	pinctrl-names = "default";
 	pinctrl-0 = <&main_i2c2_pins_default>;
 	clock-frequency = <400000>;
-- 
2.37.3