[PATCH 5/6] clk: imx: keep hsio bus clock always on

[Stephen Boyd]

Quoting Peng Fan (OSS) (2022-10-27 03:11:58)
> From: Jacky Bai <ping.bai at nxp.com>
> 
> During Linux System suspend/resume stress test after System Sleep
> enabled, system will stuck sometimes. It is because NICMIX is powered
> down, which HSIOMIX(always on) is not powered down. When NICMIX
> powering down, HSIOMIX will get a hardware handshake, without HSIO ROOT
> clk, the handshake will lose. Then after NICMIX power on when system
> resume, the access to HSIOMIX through NICMIX would be broken. So keep HSIO
> ROOT always on.
> 
> Reviewed-by: Peng Fan <peng.fan at nxp.com>
> Signed-off-by: Jacky Bai <ping.bai at nxp.com>
>  [Peng Fan] rewrite commit message
> Signed-off-by: Peng Fan <peng.fan at nxp.com>
> ---
>  drivers/clk/imx/clk-imx93.c | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/drivers/clk/imx/clk-imx93.c b/drivers/clk/imx/clk-imx93.c
> index 422ad3c89845..74e8d810db7f 100644
> --- a/drivers/clk/imx/clk-imx93.c
> +++ b/drivers/clk/imx/clk-imx93.c
> @@ -109,7 +109,7 @@ static const struct imx93_clk_root {
>         { IMX93_CLK_CCM_CKO2,           "ccm_cko2_root",        0x1d00, CKO2_SEL, },
>         { IMX93_CLK_CCM_CKO3,           "ccm_cko3_root",        0x1d80, CKO1_SEL, },
>         { IMX93_CLK_CCM_CKO4,           "ccm_cko4_root",        0x1e00, CKO2_SEL, },
> -       { IMX93_CLK_HSIO,               "hsio_root",            0x1e80, LOW_SPEED_IO_SEL, },
> +       { IMX93_CLK_HSIO,               "hsio_root",            0x1e80, LOW_SPEED_IO_SEL, CLK_IS_CRITICAL},

Similarly add a comment for critical flag please.