[PATCH v5 5/7] drm/vc4: hdmi: Rework hdmi_enable_4kp60 detection code
Dave Stevenson
dave.stevenson at raspberrypi.com
Thu Oct 27 06:58:30 PDT 2022
On Thu, 27 Oct 2022 at 13:53, Maxime Ripard <maxime at cerno.tech> wrote:
>
> In order to support higher HDMI frequencies, users have to set the
> hdmi_enable_4kp60 parameter in their config.txt file.
>
> This will have the side-effect of raising the maximum of the core clock,
> tied to the HVS, and managed by the HVS driver.
>
> However, we are querying this in the HDMI driver by poking into the HVS
> structure to get our struct clk handle.
>
> Let's make this part of the HVS bind implementation to have all the core
> clock related setup in the same place.
>
> Signed-off-by: Maxime Ripard <maxime at cerno.tech>
Thanks for the rename of the variable - pulling scrambling into it
made it confusing.
Reviewed-by: Dave Stevenson <dave.stevenson at raspberrypi.com>
> ---
> drivers/gpu/drm/vc4/vc4_drv.h | 10 ++++++++++
> drivers/gpu/drm/vc4/vc4_hdmi.c | 15 ++++-----------
> drivers/gpu/drm/vc4/vc4_hdmi.h | 8 --------
> drivers/gpu/drm/vc4/vc4_hvs.c | 23 +++++++++++++++++++++++
> 4 files changed, 37 insertions(+), 19 deletions(-)
>
> diff --git a/drivers/gpu/drm/vc4/vc4_drv.h b/drivers/gpu/drm/vc4/vc4_drv.h
> index 418a8242691f..8da2b80fdbd3 100644
> --- a/drivers/gpu/drm/vc4/vc4_drv.h
> +++ b/drivers/gpu/drm/vc4/vc4_drv.h
> @@ -326,6 +326,8 @@ struct vc4_hvs {
>
> struct clk *core_clk;
>
> + unsigned long max_core_rate;
> +
> /* Memory manager for CRTCs to allocate space in the display
> * list. Units are dwords.
> */
> @@ -337,6 +339,14 @@ struct vc4_hvs {
> struct drm_mm_node mitchell_netravali_filter;
>
> struct debugfs_regset32 regset;
> +
> + /*
> + * Even if HDMI0 on the RPi4 can output modes requiring a pixel
> + * rate higher than 297MHz, it needs some adjustments in the
> + * config.txt file to be able to do so and thus won't always be
> + * available.
> + */
> + bool vc5_hdmi_enable_hdmi_20;
> };
>
> struct vc4_plane {
> diff --git a/drivers/gpu/drm/vc4/vc4_hdmi.c b/drivers/gpu/drm/vc4/vc4_hdmi.c
> index 3acc1858c55f..98a6643821bb 100644
> --- a/drivers/gpu/drm/vc4/vc4_hdmi.c
> +++ b/drivers/gpu/drm/vc4/vc4_hdmi.c
> @@ -46,7 +46,6 @@
> #include <linux/pm_runtime.h>
> #include <linux/rational.h>
> #include <linux/reset.h>
> -#include <soc/bcm2835/raspberrypi-clocks.h>
> #include <sound/dmaengine_pcm.h>
> #include <sound/hdmi-codec.h>
> #include <sound/pcm_drm_eld.h>
> @@ -460,6 +459,7 @@ static int vc4_hdmi_connector_detect_ctx(struct drm_connector *connector,
> static int vc4_hdmi_connector_get_modes(struct drm_connector *connector)
> {
> struct vc4_hdmi *vc4_hdmi = connector_to_vc4_hdmi(connector);
> + struct vc4_dev *vc4 = to_vc4_dev(connector->dev);
> int ret = 0;
> struct edid *edid;
>
> @@ -483,7 +483,7 @@ static int vc4_hdmi_connector_get_modes(struct drm_connector *connector)
> ret = drm_add_edid_modes(connector, edid);
> kfree(edid);
>
> - if (vc4_hdmi->disable_4kp60) {
> + if (!vc4->hvs->vc5_hdmi_enable_hdmi_20) {
> struct drm_device *drm = connector->dev;
> const struct drm_display_mode *mode;
>
> @@ -1757,11 +1757,12 @@ vc4_hdmi_encoder_clock_valid(const struct vc4_hdmi *vc4_hdmi,
> {
> const struct drm_connector *connector = &vc4_hdmi->connector;
> const struct drm_display_info *info = &connector->display_info;
> + struct vc4_dev *vc4 = to_vc4_dev(connector->dev);
>
> if (clock > vc4_hdmi->variant->max_pixel_clock)
> return MODE_CLOCK_HIGH;
>
> - if (vc4_hdmi->disable_4kp60 && clock > HDMI_14_MAX_TMDS_CLK)
> + if (!vc4->hvs->vc5_hdmi_enable_hdmi_20 && clock > HDMI_14_MAX_TMDS_CLK)
> return MODE_CLOCK_HIGH;
>
> if (info->max_tmds_clock && clock > (info->max_tmds_clock * 1000))
> @@ -3428,14 +3429,6 @@ static int vc4_hdmi_bind(struct device *dev, struct device *master, void *data)
> vc4_hdmi->disable_wifi_frequencies =
> of_property_read_bool(dev->of_node, "wifi-2.4ghz-coexistence");
>
> - if (variant->max_pixel_clock == 600000000) {
> - struct vc4_dev *vc4 = to_vc4_dev(drm);
> - unsigned int max_rate = rpi_firmware_clk_get_max_rate(vc4->hvs->core_clk);
> -
> - if (max_rate < 550000000)
> - vc4_hdmi->disable_4kp60 = true;
> - }
> -
> ret = devm_pm_runtime_enable(dev);
> if (ret)
> return ret;
> diff --git a/drivers/gpu/drm/vc4/vc4_hdmi.h b/drivers/gpu/drm/vc4/vc4_hdmi.h
> index db823efb2563..e3619836ca17 100644
> --- a/drivers/gpu/drm/vc4/vc4_hdmi.h
> +++ b/drivers/gpu/drm/vc4/vc4_hdmi.h
> @@ -156,14 +156,6 @@ struct vc4_hdmi {
> */
> bool disable_wifi_frequencies;
>
> - /*
> - * Even if HDMI0 on the RPi4 can output modes requiring a pixel
> - * rate higher than 297MHz, it needs some adjustments in the
> - * config.txt file to be able to do so and thus won't always be
> - * available.
> - */
> - bool disable_4kp60;
> -
> struct cec_adapter *cec_adap;
> struct cec_msg cec_rx_msg;
> bool cec_tx_ok;
> diff --git a/drivers/gpu/drm/vc4/vc4_hvs.c b/drivers/gpu/drm/vc4/vc4_hvs.c
> index 4ac9f5a2d5f9..fc4b7310bf63 100644
> --- a/drivers/gpu/drm/vc4/vc4_hvs.c
> +++ b/drivers/gpu/drm/vc4/vc4_hvs.c
> @@ -28,6 +28,8 @@
> #include <drm/drm_drv.h>
> #include <drm/drm_vblank.h>
>
> +#include <soc/bcm2835/raspberrypi-firmware.h>
> +
> #include "vc4_drv.h"
> #include "vc4_regs.h"
>
> @@ -791,12 +793,33 @@ static int vc4_hvs_bind(struct device *dev, struct device *master, void *data)
> hvs->regset.nregs = ARRAY_SIZE(hvs_regs);
>
> if (vc4->is_vc5) {
> + struct rpi_firmware *firmware;
> + struct device_node *node;
> + unsigned int max_rate;
> +
> + node = rpi_firmware_find_node();
> + if (!node)
> + return -EINVAL;
> +
> + firmware = rpi_firmware_get(node);
> + of_node_put(node);
> + if (!firmware)
> + return -EPROBE_DEFER;
> +
> hvs->core_clk = devm_clk_get(&pdev->dev, NULL);
> if (IS_ERR(hvs->core_clk)) {
> dev_err(&pdev->dev, "Couldn't get core clock\n");
> return PTR_ERR(hvs->core_clk);
> }
>
> + max_rate = rpi_firmware_clk_get_max_rate(firmware,
> + RPI_FIRMWARE_CORE_CLK_ID);
> + rpi_firmware_put(firmware);
> + if (max_rate >= 550000000)
> + hvs->vc5_hdmi_enable_hdmi_20 = true;
> +
> + hvs->max_core_rate = max_rate;
> +
> ret = clk_prepare_enable(hvs->core_clk);
> if (ret) {
> dev_err(&pdev->dev, "Couldn't enable the core clock\n");
>
> --
> b4 0.11.0-dev-99e3a
More information about the linux-arm-kernel
mailing list