[PATCH net-next 07/11] net: mtk_eth_soc: move PHY power up
Russell King (Oracle)
rmk+kernel at armlinux.org.uk
Thu Oct 27 06:11:08 PDT 2022
The PHY power up is common to both configuration paths, so move it into
the parent function. We need to do this for all serdes modes.
Signed-off-by: Russell King (Oracle) <rmk+kernel at armlinux.org.uk>
---
drivers/net/ethernet/mediatek/mtk_sgmii.c | 11 ++++-------
1 file changed, 4 insertions(+), 7 deletions(-)
diff --git a/drivers/net/ethernet/mediatek/mtk_sgmii.c b/drivers/net/ethernet/mediatek/mtk_sgmii.c
index d26a0ba2e47b..63b25574caac 100644
--- a/drivers/net/ethernet/mediatek/mtk_sgmii.c
+++ b/drivers/net/ethernet/mediatek/mtk_sgmii.c
@@ -45,9 +45,6 @@ static void mtk_pcs_setup_mode_an(struct mtk_pcs *mpcs)
regmap_update_bits(mpcs->regmap, SGMSYS_PCS_CONTROL_1,
SGMII_AN_RESTART, SGMII_AN_RESTART);
-
- regmap_update_bits(mpcs->regmap, SGMSYS_QPHY_PWR_STATE_CTRL,
- SGMII_PHYA_PWD, 0);
}
/* For 1000BASE-X and 2500BASE-X interface modes, which operate at a
@@ -72,10 +69,6 @@ static void mtk_pcs_setup_mode_force(struct mtk_pcs *mpcs,
regmap_update_bits(mpcs->regmap, SGMSYS_SGMII_MODE,
SGMII_IF_MODE_MASK & ~SGMII_DUPLEX_FULL,
SGMII_SPEED_1000);
-
- /* Release PHYA power down state */
- regmap_update_bits(mpcs->regmap, SGMSYS_QPHY_PWR_STATE_CTRL,
- SGMII_PHYA_PWD, 0);
}
static int mtk_pcs_config(struct phylink_pcs *pcs, unsigned int mode,
@@ -91,6 +84,10 @@ static int mtk_pcs_config(struct phylink_pcs *pcs, unsigned int mode,
else if (phylink_autoneg_inband(mode))
mtk_pcs_setup_mode_an(mpcs);
+ /* Release PHYA power down state */
+ regmap_update_bits(mpcs->regmap, SGMSYS_QPHY_PWR_STATE_CTRL,
+ SGMII_PHYA_PWD, 0);
+
return 0;
}
--
2.30.2
More information about the linux-arm-kernel
mailing list