[PATCH 6/9] KVM: arm64: PMU: Move the ID_AA64DFR0_EL1.PMUver limit to VM creation
Marc Zyngier
maz at kernel.org
Wed Oct 26 07:43:07 PDT 2022
Hi Reiji,
Sorry it took so long to get back to this.
On Fri, 26 Aug 2022 07:02:21 +0100,
Reiji Watanabe <reijiw at google.com> wrote:
>
> Hi Marc,
>
> On Thu, Aug 25, 2022 at 9:34 PM Reiji Watanabe <reijiw at google.com> wrote:
> >
> > Hi Marc,
> >
> > On Fri, Aug 5, 2022 at 6:58 AM Marc Zyngier <maz at kernel.org> wrote:
> > >
> > > As further patches will enable the selection of a PMU revision
> > > from userspace, sample the supported PMU revision at VM creation
> > > time, rather than building each time the ID_AA64DFR0_EL1 register
> > > is accessed.
> > >
> > > This shouldn't result in any change in behaviour.
> > >
> > > Signed-off-by: Marc Zyngier <maz at kernel.org>
> > > ---
> > > arch/arm64/include/asm/kvm_host.h | 1 +
> > > arch/arm64/kvm/arm.c | 6 ++++++
> > > arch/arm64/kvm/pmu-emul.c | 11 +++++++++++
> > > arch/arm64/kvm/sys_regs.c | 26 +++++++++++++++++++++-----
> > > include/kvm/arm_pmu.h | 6 ++++++
> > > 5 files changed, 45 insertions(+), 5 deletions(-)
> > >
> > > diff --git a/arch/arm64/include/asm/kvm_host.h b/arch/arm64/include/asm/kvm_host.h
> > > index f38ef299f13b..411114510634 100644
> > > --- a/arch/arm64/include/asm/kvm_host.h
> > > +++ b/arch/arm64/include/asm/kvm_host.h
> > > @@ -163,6 +163,7 @@ struct kvm_arch {
> > >
> > > u8 pfr0_csv2;
> > > u8 pfr0_csv3;
> > > + u8 dfr0_pmuver;
> > >
> > > /* Hypercall features firmware registers' descriptor */
> > > struct kvm_smccc_features smccc_feat;
> > > diff --git a/arch/arm64/kvm/arm.c b/arch/arm64/kvm/arm.c
> > > index 8fe73ee5fa84..e4f80f0c1e97 100644
> > > --- a/arch/arm64/kvm/arm.c
> > > +++ b/arch/arm64/kvm/arm.c
> > > @@ -164,6 +164,12 @@ int kvm_arch_init_vm(struct kvm *kvm, unsigned long type)
> > > set_default_spectre(kvm);
> > > kvm_arm_init_hypercalls(kvm);
> > >
> > > + /*
> > > + * Initialise the default PMUver before there is a chance to
> > > + * create an actual PMU.
> > > + */
> > > + kvm->arch.dfr0_pmuver = kvm_arm_pmu_get_host_pmuver();
> > > +
> > > return ret;
> > > out_free_stage2_pgd:
> > > kvm_free_stage2_pgd(&kvm->arch.mmu);
> > > diff --git a/arch/arm64/kvm/pmu-emul.c b/arch/arm64/kvm/pmu-emul.c
> > > index ddd79b64b38a..33a88ca7b7fd 100644
> > > --- a/arch/arm64/kvm/pmu-emul.c
> > > +++ b/arch/arm64/kvm/pmu-emul.c
> > > @@ -1021,3 +1021,14 @@ int kvm_arm_pmu_v3_has_attr(struct kvm_vcpu *vcpu, struct kvm_device_attr *attr)
> > >
> > > return -ENXIO;
> > > }
> > > +
> > > +u8 kvm_arm_pmu_get_host_pmuver(void)
> >
> > Nit: Since this function doesn't simply return the host's pmuver, but the
> > pmuver limit for guests, perhaps "kvm_arm_pmu_get_guest_pmuver_limit"
> > might be more clear (closer to what it does) ?
Maybe a bit verbose, but I'll work something out.
> >
> > > +{
> > > + u64 tmp;
> > > +
> > > + tmp = read_sanitised_ftr_reg(SYS_ID_AA64DFR0_EL1);
> > > + tmp = cpuid_feature_cap_perfmon_field(tmp,
> > > + ID_AA64DFR0_PMUVER_SHIFT,
> > > + ID_AA64DFR0_PMUVER_8_4);
> > > + return FIELD_GET(ARM64_FEATURE_MASK(ID_AA64DFR0_PMUVER), tmp);
> > > +}
> > > diff --git a/arch/arm64/kvm/sys_regs.c b/arch/arm64/kvm/sys_regs.c
> > > index 333efddb1e27..55451f49017c 100644
> > > --- a/arch/arm64/kvm/sys_regs.c
> > > +++ b/arch/arm64/kvm/sys_regs.c
> > > @@ -1062,6 +1062,22 @@ static bool access_arch_timer(struct kvm_vcpu *vcpu,
> > > return true;
> > > }
> > >
> > > +static u8 pmuver_to_perfmon(const struct kvm_vcpu *vcpu)
> > > +{
> > > + if (!kvm_vcpu_has_pmu(vcpu))
> > > + return 0;
> > > +
> > > + switch (vcpu->kvm->arch.dfr0_pmuver) {
> > > + case ID_AA64DFR0_PMUVER_8_0:
> > > + return ID_DFR0_PERFMON_8_0;
> > > + case ID_AA64DFR0_PMUVER_IMP_DEF:
> > > + return 0;
> > > + default:
> > > + /* Anything ARMv8.4+ has the same value. For now. */
> > > + return vcpu->kvm->arch.dfr0_pmuver;
> > > + }
> > > +}
> > > +
> > > /* Read a sanitised cpufeature ID register by sys_reg_desc */
> > > static u64 read_id_reg(const struct kvm_vcpu *vcpu,
> > > struct sys_reg_desc const *r, bool raz)
> > > @@ -1112,10 +1128,10 @@ static u64 read_id_reg(const struct kvm_vcpu *vcpu,
> > > /* Limit debug to ARMv8.0 */
> > > val &= ~ARM64_FEATURE_MASK(ID_AA64DFR0_DEBUGVER);
> > > val |= FIELD_PREP(ARM64_FEATURE_MASK(ID_AA64DFR0_DEBUGVER), 6);
> > > - /* Limit guests to PMUv3 for ARMv8.4 */
> > > - val = cpuid_feature_cap_perfmon_field(val,
> > > - ID_AA64DFR0_PMUVER_SHIFT,
> > > - kvm_vcpu_has_pmu(vcpu) ? ID_AA64DFR0_PMUVER_8_4 : 0);
> > > + /* Set PMUver to the required version */
> > > + val &= ~ARM64_FEATURE_MASK(ID_AA64DFR0_PMUVER);
> > > + val |= FIELD_PREP(ARM64_FEATURE_MASK(ID_AA64DFR0_PMUVER),
> > > + kvm_vcpu_has_pmu(vcpu) ? vcpu->kvm->arch.dfr0_pmuver : 0);
>
> I've just noticed one issue in this patch while I'm reviewing patch-7.
>
> I would think that this patch makes PMUVER and PERFMON inconsistent
> when PMU is not enabled for the vCPU, and the host's sanitised PMUVER
> is IMP_DEF.
>
> Previously, when PMU is not enabled for the vCPU and the host's
> sanitized value of PMUVER is IMP_DEF(0xf), the vCPU's PMUVER and PERFMON
> are set to IMP_DEF due to a bug of cpuid_feature_cap_perfmon_field().
> (https://lore.kernel.org/all/20220214065746.1230608-11-reijiw@google.com/)
>
> With this patch, the vCPU's PMUVER will be 0 for the same case,
> while the vCPU's PERFMON will stay the same (IMP_DEF).
> I guess you unintentionally corrected only the PMUVER value of the VCPU.
I think that with this patch both PMUVer and Perfmon values get set to
0 (pmuver_to_perfmon() returns 0 for both ID_AA64DFR0_PMUVER_IMP_DEF
and no PMU at all). Am I missing anything here?
However, you definitely have a point that we should handle a guest
being restored with an IMPDEF PMU. Which means I need to revisit this
patch and the userspace accessors. Oh well...
Thanks,
M.
--
Without deviation from the norm, progress is not possible.
More information about the linux-arm-kernel
mailing list