[PATCH v2 0/7] Rename DTB overlay source files

[Rob Herring]

On Mon, Oct 24, 2022 at 12:34 PM Andrew Davis <afd at ti.com> wrote:
>
> Hello all,
>
> This is a series based on my patch here[0]. As suggested by Rob
> I've resurrected Frank's patch and appended it to mine as a series.
>
> First patch here is my original patch, 3rd is Frank's patch but with
> the unittest changes pulled out into the 2nd patch. That was re-worked
> moving the source building macro into scripts/Makefile.lib.
>
> Patches 4, 5, and 6 are an attempt at renaming all the existing DTB
> overlays. Split out by platform so they could be taken by platform
> maintainers or if easier ACK'd here and taken all together.
>
> This should cover all the DTB overlays so we can remove the old .dts
> rule for overlays and make .dtso the only supported way, let me know
> if we want that this cycle and I can post that too.
>
> Thanks,
> Andrew
>
> Changes from v1[1]:
>  - Added patch to rename pi433 overlay.
>  - Cleaned wording on patch 4-6.
>  - Collected some ACKs
>
> [0] https://www.spinics.net/lists/kernel/msg4548509.html
> [1] https://www.spinics.net/lists/arm-kernel/msg1020165.html
>
> Andrew Davis (6):
>   kbuild: Allow DTB overlays to built from .dtso named source files
>   kbuild: Allow DTB overlays to built into .dtso.S files
>   arm64: dts: freescale: Rename DTB overlay source files from .dts to
>     .dtso
>   arm64: dts: renesas: Rename DTB overlay source files from .dts to
>     .dtso
>   arm64: dts: xilinx: Rename DTB overlay source files from .dts to .dtso
>   staging: pi433: overlay: Rename overlay source file from .dts to .dtso
>
> Frank Rowand (1):
>   of: overlay: rename overlay source files from .dts to .dtso

I've applied patches 1-3 and 7. I'll send a PR for the branch to the
platform maintainers after a few days in linux-next.

Rob