[PATCH 3/3] ARM: dts: suniv: Add Lctech Pi F1C200s devicetree

[Andre Przywara]

On Tue, 25 Oct 2022 23:30:26 +0800
Icenowy Zheng <uwu at icenowy.me> wrote:

Hi Icenowy,

thanks for having a look!
And btw, forgot to mention in the cover letter: this relies on the USB bits
in your series. Which works nicely, even in host mode.

> 在 2022-10-25星期二的 15:59 +0100，Andre Przywara写道：
> > The Lctech Pi F1C200s (also previously known under the Cherry Pi
> > brand)  
> 
> Oh? Are they the same hardware?

My board looks identical to this one:
https://www.cnx-software.com/2022/02/03/more-allwinner-f1c200s-arm9-boards-mangopi-r3-and-cherrypi-f1c200s/#cherrypi-f1c200s

The only difference is the silkscreen, there is no cherry logo on mine,
but the (no longer working) URL is the same, so it's the same board from
the same company. I guess legal troubles?

> > is a small development board with the Allwinner F1C200s SoC. This is
> > the
> > same as the F1C100s, but with 64MB instead of 32MB co-packaged DRAM.
> > 
> > Alongside the obligatory micro-SD card slot, the board features a
> > SPI-NAND flash chip, LCD and touch connectors, and unpopulated
> > expansion header pins.
> > There are two USB Type-C ports on the board: One supplies the power,
> > also
> > connects to the USB MUSB OTG controller port. The other one is
> > connected
> > to an CH340 USB serial chip, which in turn is connected to UART1.
> > 
> > Add a devicetree file, so that the board can be used easily.
> > 
> > Signed-off-by: Andre Przywara <andre.przywara at arm.com>
> > ---
> >  arch/arm/boot/dts/Makefile                    |  1 +
> >  arch/arm/boot/dts/suniv-f1c100s.dtsi          |  5 ++
> >  arch/arm/boot/dts/suniv-f1c200s-lctech-pi.dts | 80
> > +++++++++++++++++++
> >  3 files changed, 86 insertions(+)
> >  create mode 100644 arch/arm/boot/dts/suniv-f1c200s-lctech-pi.dts
> > 
> > diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
> > index 6abf6434eb372..f99c5c20bf7ef 100644
> > --- a/arch/arm/boot/dts/Makefile
> > +++ b/arch/arm/boot/dts/Makefile
> > @@ -1394,6 +1394,7 @@ dtb-$(CONFIG_MACH_SUN9I) += \
> >         sun9i-a80-cubieboard4.dtb
> >  dtb-$(CONFIG_MACH_SUNIV) += \
> >         suniv-f1c100s-licheepi-nano.dtb \
> > +       suniv-f1c200s-lctech-pi.dtb \
> >         suniv-f1c200s-popstick-v1.1.dtb
> >  dtb-$(CONFIG_ARCH_TEGRA_2x_SOC) += \
> >         tegra20-acer-a500-picasso.dtb \
> > diff --git a/arch/arm/boot/dts/suniv-f1c100s.dtsi
> > b/arch/arm/boot/dts/suniv-f1c100s.dtsi
> > index 0f24c766c9fc5..2ec022e92eea8 100644
> > --- a/arch/arm/boot/dts/suniv-f1c100s.dtsi
> > +++ b/arch/arm/boot/dts/suniv-f1c100s.dtsi
> > @@ -201,6 +201,11 @@ uart0_pe_pins: uart0-pe-pins {
> >                                 pins = "PE0", "PE1";
> >                                 function = "uart0";
> >                         };
> > +
> > +                       uart1_pa_pins: uart1-pa-pins {
> > +                               pins = "PA2", "PA3";
> > +                               function = "uart1";
> > +                       };  
> 
> Should this be in a splitted commit?

I don't know if this is really necessary, but am of course happy to spin
this one out, if needed.

> >                 };
> >  
> >                 timer at 1c20c00 {
> > diff --git a/arch/arm/boot/dts/suniv-f1c200s-lctech-pi.dts
> > b/arch/arm/boot/dts/suniv-f1c200s-lctech-pi.dts
> > new file mode 100644
> > index 0000000000000..a9d1778395438
> > --- /dev/null
> > +++ b/arch/arm/boot/dts/suniv-f1c200s-lctech-pi.dts
> > @@ -0,0 +1,80 @@
> > +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> > +/*
> > + * Copyright 2022 Arm Ltd,
> > + * based on work:
> > + *   Copyright 2022 Icenowy Zheng <uwu at icenowy.me>
> > + */
> > +
> > +/dts-v1/;
> > +#include "suniv-f1c100s.dtsi"
> > +
> > +#include <dt-bindings/gpio/gpio.h>
> > +
> > +/ {
> > +       model = "Lctech Pi F1C200s";
> > +       compatible = "lctech,pi-f1c200s", "allwinner,suniv-f1c200s",
> > +                    "allwinner,suniv-f1c100s";
> > +
> > +       aliases {
> > +               mmc0 = &mmc0;
> > +               serial0 = &uart1;
> > +               spi0 = &spi0;
> > +       };
> > +
> > +       chosen {
> > +               stdout-path = "serial0:115200n8";
> > +       };
> > +
> > +       reg_vcc3v3: regulator-3v3 {
> > +               compatible = "regulator-fixed";
> > +               regulator-name = "vcc3v3";
> > +               regulator-min-microvolt = <3300000>;
> > +               regulator-max-microvolt = <3300000>;
> > +       };
> > +};
> > +
> > +&mmc0 {
> > +       broken-cd;
> > +       bus-width = <4>;
> > +       disable-wp;
> > +       vmmc-supply = <&reg_vcc3v3>;
> > +       status = "okay";
> > +};
> > +
> > +&otg_sram {
> > +       status = "okay";
> > +};
> > +
> > +&spi0 {
> > +       pinctrl-names = "default";
> > +       pinctrl-0 = <&spi0_pc_pins>;
> > +       status = "okay";
> > +
> > +       flash at 0 {
> > +               compatible = "spi-nand";
> > +               reg = <0>;
> > +               #address-cells = <1>;
> > +               #size-cells = <1>;
> > +               spi-max-frequency = <40000000>;
> > +       };
> > +};
> > +
> > +&uart1 {
> > +       pinctrl-names = "default";
> > +       pinctrl-0 = <&uart1_pa_pins>;
> > +       status = "okay";
> > +};
> > +
> > +/*
> > + * This is a Type-C socket, but CC1/2 are not connected, and VBUS is
> > connected
> > + * to Vin, which supplies the board. Host mode works (if the board
> > is powered
> > + * otherwise), but peripheral is probably the intention.
> > + */
> > +&usb_otg {
> > +       dr_mode = "peripheral";
> > +       status = "okay";
> > +};  
> 
> Finally we should get able to override dr_mode just by HW.

Do you mean by software? Yeah, that would be useful. Otherwise one could
dedicate a GPIO to a fake ID_DET pin, I guess. Or use a DT overlay.

Cheers,
Andre

> > +
> > +&usbphy {
> > +       status = "okay";
> > +};  
>