[PATCH] [RFC] soc: imx: imx8m-blk-ctrl: Split clock prepare from clock enable in the domain
Laurent Pinchart
laurent.pinchart at ideasonboard.com
Mon Oct 24 18:03:58 PDT 2022
Hi Peng,
On Tue, Oct 25, 2022 at 12:49:46AM +0000, Peng Fan wrote:
> On 2022年10月25日 8:26, Laurent Pinchart wrote:
> > On Mon, Oct 24, 2022 at 05:09:47PM +0200, Marek Vasut wrote:
> > > It is possible for clk_disable_unused() to trigger lockdep warning
> > > regarding lock ordering in this driver. This happens in case of the
> > > following conditions:
> > >
> > > A) clock core clk_disable_unused() triggers the following sequence in a
> > > driver which also uses blkctrl domain:
> > > - clk_prepare_lock() -> obtains clock core prepare_lock
> > > - pm_runtime_get*() -> obtains &blk_ctrl_genpd_lock_class
> > >
> > > B) driver powers up a power domain and triggers the following sequence
> > > in blkctrl:
> > > - pm_runtime_get_sync() -> obtains &blk_ctrl_genpd_lock_class
> > > - clk_bulk_prepare_enable() -> obtains clock core prepare_lock
> > >
> > > This can lead to a deadlock in case A and B runs on separate CPUs.
> > >
> > > To avoid the deadlock, split clk_*prepare() from clk_*enable() and
> > > call the former before pm_runtime_get_sync(). This way, the blkctrl
> > > driver always claims the prepare_lock before blk_ctrl_genpd_lock_class
> > > and the deadlock is avoided.
> >
> > I'm afraid I'm still getting occasional warnings from lockdep :-( This one
> > happened at boot time:
> >
> > [ 17.837243]
> > [ 17.837254] ======================================================
> > [ 17.837256] WARNING: possible circular locking dependency detected
> > [ 17.837260] 6.1.0-rc2-00199-gd504fb27855a-dirty #301 Not tainted
> > [ 17.837265] ------------------------------------------------------
> > [ 17.837267] kworker/u8:6/152 is trying to acquire lock:
> > [ 17.837273] ffff000000eab6f0 (&blk_ctrl_genpd_lock_class){+.+.}-{3:3}, at: genpd_lock_mtx+0x20/0x30
> > [ 17.837300]
> > [ 17.837300] but task is already holding lock:
> > [ 17.837302] ffff800009c1e5e8 (prepare_lock){+.+.}-{3:3}, at: clk_prepare_lock+0x34/0xb0
> > [ 17.837321]
> > [ 17.837321] which lock already depends on the new lock.
> > [ 17.837321]
> > [ 17.837323]
> > [ 17.837323] the existing dependency chain (in reverse order) is:
> > [ 17.837326]
> > [ 17.837326] -> #1 (prepare_lock){+.+.}-{3:3}:
> > [ 17.837337] lock_acquire+0x68/0x90
> > [ 17.837345] __mutex_lock+0x8c/0x420
> > [ 17.837354] mutex_lock_nested+0x34/0x40
> > [ 17.837360] clk_prepare_lock+0x54/0xb0
> > [ 17.837367] clk_unprepare+0x2c/0x50
> > [ 17.837373] clk_bulk_unprepare+0x44/0x60
> > [ 17.837380] imx8mp_blk_ctrl_power_off+0xb4/0x100
> > [ 17.837386] _genpd_power_off+0x9c/0x180
> > [ 17.837392] genpd_power_off.part.0.isra.0+0x130/0x2a0
> > [ 17.837399] genpd_power_off_work_fn+0x6c/0x90
> > [ 17.837405] process_one_work+0x294/0x6b0
> > [ 17.837412] worker_thread+0x7c/0x450
> > [ 17.837416] kthread+0x114/0x120
> > [ 17.837424] ret_from_fork+0x10/0x20
> > [ 17.837431]
> > [ 17.837431] -> #0 (&blk_ctrl_genpd_lock_class){+.+.}-{3:3}:
> > [ 17.837442] __lock_acquire+0x1148/0x1910
> > [ 17.837448] lock_acquire.part.0+0xec/0x260
> > [ 17.837454] lock_acquire+0x68/0x90
> > [ 17.837459] __mutex_lock+0x8c/0x420
> > [ 17.837466] mutex_lock_nested+0x34/0x40
> > [ 17.837472] genpd_lock_mtx+0x20/0x30
> > [ 17.837478] genpd_runtime_resume+0xfc/0x2e0
> > [ 17.837484] __rpm_callback+0x50/0x1b0
> > [ 17.837492] rpm_callback+0x74/0x80
> > [ 17.837499] rpm_resume+0x434/0x6e0
> > [ 17.837505] __pm_runtime_resume+0x54/0xa0
> > [ 17.837512] clk_pm_runtime_get.part.0.isra.0+0x24/0xa0
> > [ 17.837518] clk_core_set_rate_nolock+0xbc/0x2b0
> > [ 17.837524] clk_set_rate+0x40/0xa0
>
> Which clk is you using? This clk seems requires a power domain.
If I'm not mistaken, the is the "pix" clock for the lcdif device, which
is provided by the hdmi_tx_phy. See drivers/gpu/drm/mxsfb/lcdif_drv.c
and arch/arm64/boot/dts/freescale/imx8mp.dtsi.
> As Marek replied, the blk ctrl driver may need similar change to split
> clk prepare and clk enable.
> Do you have a public tree that for test?
Sure, it is available at
https://gitlab.com/ideasonboard/nxp/linux/tree/pinchartl/v6.1/dev/isp/next
> > [ 17.837529] lcdif_crtc_atomic_enable+0x98/0x880 [imx_lcdif]
> > [ 17.837544] drm_atomic_helper_commit_modeset_enables+0xac/0x2b0
> > [ 17.837551] drm_atomic_helper_commit_tail_rpm+0x58/0xb0
> > [ 17.837558] commit_tail+0xac/0x1a0
> > [ 17.837563] drm_atomic_helper_commit+0x1a0/0x1c0
> > [ 17.837569] drm_atomic_commit+0x94/0x130
> > [ 17.837574] drm_client_modeset_commit_atomic+0x230/0x2a0
> > [ 17.837582] drm_client_modeset_commit_locked+0x68/0x1d0
> > [ 17.837588] drm_client_modeset_commit+0x38/0x60
> > [ 17.837594] drm_fb_helper_set_par+0xd4/0x130
> > [ 17.837600] fbcon_init+0x3d4/0x540
> > [ 17.837606] visual_init+0xb8/0x110
> > [ 17.837613] do_bind_con_driver.isra.0+0x1c8/0x3a0
> > [ 17.837620] do_take_over_console+0x148/0x200
> > [ 17.837627] do_fbcon_takeover+0x74/0xf0
> > [ 17.837632] fbcon_fb_registered+0x18c/0x200
> > [ 17.837637] register_framebuffer+0x1bc/0x2b0
> > [ 17.837645] __drm_fb_helper_initial_config_and_unlock+0x338/0x5c0
> > [ 17.837650] drm_fbdev_client_hotplug+0xd8/0x1c0
> > [ 17.837656] drm_fbdev_generic_setup+0xbc/0x1b0
> > [ 17.837661] lcdif_probe+0x2b0/0x310 [imx_lcdif]
> > [ 17.837672] platform_probe+0x70/0xf0
> > [ 17.837678] really_probe+0xc8/0x3e0
> > [ 17.837685] __driver_probe_device+0x84/0x190
> > [ 17.837692] driver_probe_device+0x44/0x120
> > [ 17.837699] __device_attach_driver+0xc4/0x160
> > [ 17.837707] bus_for_each_drv+0x80/0xe0
> > [ 17.837713] __device_attach+0xb0/0x1f0
> > [ 17.837720] device_initial_probe+0x1c/0x30
> > [ 17.837727] bus_probe_device+0xa4/0xb0
> > [ 17.837734] deferred_probe_work_func+0xac/0x100
> > [ 17.837740] process_one_work+0x294/0x6b0
> > [ 17.837746] worker_thread+0x7c/0x450
> > [ 17.837751] kthread+0x114/0x120
> > [ 17.837758] ret_from_fork+0x10/0x20
> > [ 17.837764]
> > [ 17.837764] other info that might help us debug this:
> > [ 17.837764]
> > [ 17.837766] Possible unsafe locking scenario:
> > [ 17.837766]
> > [ 17.837768] CPU0 CPU1
> > [ 17.837770] ---- ----
> > [ 17.837772] lock(prepare_lock);
> > [ 17.837779] lock(&blk_ctrl_genpd_lock_class);
> > [ 17.837785] lock(prepare_lock);
> > [ 17.837790] lock(&blk_ctrl_genpd_lock_class);
> > [ 17.837796]
> > [ 17.837796] *** DEADLOCK ***
> > [ 17.837796]
> > [ 17.837799] 11 locks held by kworker/u8:6/152:
> > [ 17.837803] #0: ffff000000040938 ((wq_completion)events_unbound){+.+.}-{0:0}, at: process_one_work+0x1fc/0x6b0
> > [ 17.837821] #1: ffff80000b74bdd0 (deferred_probe_work){+.+.}-{0:0}, at: process_one_work+0x1fc/0x6b0
> > [ 17.837838] #2: ffff0000003f58f8 (&dev->mutex){....}-{3:3}, at: __device_attach+0x40/0x1f0
> > [ 17.837856] #3: ffff800009c1ddc0 (registration_lock){+.+.}-{3:3}, at: register_framebuffer+0x4c/0x2b0
> > [ 17.837875] #4: ffff800009ae4e68 (console_lock){+.+.}-{0:0}, at: fbcon_fb_registered+0x1f8/0x200
> > [ 17.837892] #5: ffff000002f1ee78 (&helper->lock){+.+.}-{3:3}, at: drm_fb_helper_set_par+0x98/0x130
> > [ 17.837909] #6: ffff0000038611a8 (&dev->master_mutex){+.+.}-{3:3}, at: drm_master_internal_acquire+0x2c/0x70
> > [ 17.837928] #7: ffff000002f1ec98 (&client->modeset_mutex){+.+.}-{3:3}, at: drm_client_modeset_commit_locked+0x34/0x1d0
> > [ 17.837947] #8: ffff80000b74b690 (crtc_ww_class_acquire){+.+.}-{0:0}, at: drm_client_modeset_commit_atomic+0x50/0x2a0
> > [ 17.837964] #9: ffff000003863138 (crtc_ww_class_mutex){+.+.}-{3:3}, at: drm_modeset_lock+0x48/0x130
> > [ 17.837984] #10: ffff800009c1e5e8 (prepare_lock){+.+.}-{3:3}, at: clk_prepare_lock+0x34/0xb0
> > [ 17.838003]
> > [ 17.838003] stack backtrace:
> > [ 17.838007] CPU: 1 PID: 152 Comm: kworker/u8:6 Not tainted 6.1.0-rc2-00199-gd504fb27855a-dirty #301
> > [ 17.838013] Hardware name: Polyhex Debix Model A i.MX8MPlus board (DT)
> > [ 17.838018] Workqueue: events_unbound deferred_probe_work_func
> > [ 17.838029] Call trace:
> > [ 17.838031] dump_backtrace+0xe4/0x140
> > [ 17.838042] show_stack+0x20/0x50
> > [ 17.838049] dump_stack_lvl+0x9c/0xd8
> > [ 17.838055] dump_stack+0x18/0x34
> > [ 17.838060] print_circular_bug+0x1f8/0x200
> > [ 17.838066] check_noncircular+0x160/0x180
> > [ 17.838072] __lock_acquire+0x1148/0x1910
> > [ 17.838078] lock_acquire.part.0+0xec/0x260
> > [ 17.838084] lock_acquire+0x68/0x90
> > [ 17.838089] __mutex_lock+0x8c/0x420
> > [ 17.838098] mutex_lock_nested+0x34/0x40
> > [ 17.838104] genpd_lock_mtx+0x20/0x30
> > [ 17.838110] genpd_runtime_resume+0xfc/0x2e0
> > [ 17.838117] __rpm_callback+0x50/0x1b0
> > [ 17.838125] rpm_callback+0x74/0x80
> > [ 17.838132] rpm_resume+0x434/0x6e0
> > [ 17.838138] __pm_runtime_resume+0x54/0xa0
> > [ 17.838145] clk_pm_runtime_get.part.0.isra.0+0x24/0xa0
> > [ 17.838150] clk_core_set_rate_nolock+0xbc/0x2b0
> > [ 17.838157] clk_set_rate+0x40/0xa0
> > [ 17.838162] lcdif_crtc_atomic_enable+0x98/0x880 [imx_lcdif]
> > [ 17.838175] drm_atomic_helper_commit_modeset_enables+0xac/0x2b0
> > [ 17.838182] drm_atomic_helper_commit_tail_rpm+0x58/0xb0
> > [ 17.838188] commit_tail+0xac/0x1a0
> > [ 17.838194] drm_atomic_helper_commit+0x1a0/0x1c0
> > [ 17.838200] drm_atomic_commit+0x94/0x130
> > [ 17.838205] drm_client_modeset_commit_atomic+0x230/0x2a0
> > [ 17.838212] drm_client_modeset_commit_locked+0x68/0x1d0
> > [ 17.838218] drm_client_modeset_commit+0x38/0x60
> > [ 17.838224] drm_fb_helper_set_par+0xd4/0x130
> > [ 17.838230] fbcon_init+0x3d4/0x540
> > [ 17.838235] visual_init+0xb8/0x110
> > [ 17.838243] do_bind_con_driver.isra.0+0x1c8/0x3a0
> > [ 17.838250] do_take_over_console+0x148/0x200
> > [ 17.838257] do_fbcon_takeover+0x74/0xf0
> > [ 17.838262] fbcon_fb_registered+0x18c/0x200
> > [ 17.838268] register_framebuffer+0x1bc/0x2b0
> > [ 17.838275] __drm_fb_helper_initial_config_and_unlock+0x338/0x5c0
> > [ 17.838282] drm_fbdev_client_hotplug+0xd8/0x1c0
> > [ 17.838288] drm_fbdev_generic_setup+0xbc/0x1b0
> > [ 17.838293] lcdif_probe+0x2b0/0x310 [imx_lcdif]
> > [ 17.838304] platform_probe+0x70/0xf0
> > [ 17.838309] really_probe+0xc8/0x3e0
> > [ 17.838316] __driver_probe_device+0x84/0x190
> > [ 17.838323] driver_probe_device+0x44/0x120
> > [ 17.838330] __device_attach_driver+0xc4/0x160
> > [ 17.838338] bus_for_each_drv+0x80/0xe0
> > [ 17.838344] __device_attach+0xb0/0x1f0
> > [ 17.838351] device_initial_probe+0x1c/0x30
> > [ 17.838358] bus_probe_device+0xa4/0xb0
> > [ 17.838365] deferred_probe_work_func+0xac/0x100
> > [ 17.838372] process_one_work+0x294/0x6b0
> > [ 17.838378] worker_thread+0x7c/0x450
> > [ 17.838383] kthread+0x114/0x120
> > [ 17.838390] ret_from_fork+0x10/0x20
> >
> > > Signed-off-by: Marek Vasut <marex at denx.de>
> > > ---
> > > Cc: Fabio Estevam <festevam at denx.de>
> > > Cc: Jacky Bai <ping.bai at nxp.com>
> > > Cc: Laurent Pinchart <laurent.pinchart at ideasonboard.com>
> > > Cc: Lucas Stach <l.stach at pengutronix.de>
> > > Cc: Peng Fan <peng.fan at nxp.com>
> > > Cc: Shawn Guo <shawnguo at kernel.org>
> > > Cc: Shengjiu Wang <shengjiu.wang at nxp.com>
> > > Cc: Stephen Boyd <sboyd at kernel.org>
> > > Cc: linux-clk at vger.kernel.org
> > > Cc: linux-imx at nxp.com
> > > To: linux-arm-kernel at lists.infradead.org
> > > ---
> > > drivers/soc/imx/imx8mp-blk-ctrl.c | 14 +++++++++++---
> > > 1 file changed, 11 insertions(+), 3 deletions(-)
> > >
> > > diff --git a/drivers/soc/imx/imx8mp-blk-ctrl.c
> > > b/drivers/soc/imx/imx8mp-blk-ctrl.c
> > > index b7d4161fcda9c..571c98b5b005b 100644
> > > --- a/drivers/soc/imx/imx8mp-blk-ctrl.c
> > > +++ b/drivers/soc/imx/imx8mp-blk-ctrl.c
> > > @@ -393,15 +393,21 @@ static int imx8mp_blk_ctrl_power_on(struct generic_pm_domain *genpd)
> > > struct imx8mp_blk_ctrl *bc = domain->bc;
> > > int ret;
> > >
> > > + ret = clk_bulk_prepare(data->num_clks, domain->clks);
> > > + if (ret) {
> > > + dev_err(bc->dev, "failed to enable clocks\n");
> > > + return ret;
> > > + }
> > > +
> > > /* make sure bus domain is awake */
> > > ret = pm_runtime_resume_and_get(bc->bus_power_dev);
> > > if (ret < 0) {
> > > dev_err(bc->dev, "failed to power up bus domain\n");
> > > - return ret;
> > > + goto rpm_put;
> > > }
> > >
> > > /* enable upstream clocks */
> > > - ret = clk_bulk_prepare_enable(data->num_clks, domain->clks);
> > > + ret = clk_bulk_enable(data->num_clks, domain->clks);
> > > if (ret) {
> > > dev_err(bc->dev, "failed to enable clocks\n");
> > > goto bus_put;
> > > @@ -426,9 +432,11 @@ static int imx8mp_blk_ctrl_power_on(struct generic_pm_domain *genpd)
> > > return 0;
> > >
> > > clk_disable:
> > > - clk_bulk_disable_unprepare(data->num_clks, domain->clks);
> > > + clk_bulk_disable(data->num_clks, domain->clks);
> > > bus_put:
> > > pm_runtime_put(bc->bus_power_dev);
> > > +rpm_put:
> > > + clk_bulk_unprepare(data->num_clks, domain->clks);
> > >
> > > return ret;
> > > }
--
Regards,
Laurent Pinchart
More information about the linux-arm-kernel
mailing list