[PATCH v2 06/10] ARM: suniv: add USB-related device nodes

[Andre Przywara]

On Wed, 12 Oct 2022 13:55:58 +0800
Icenowy Zheng <uwu at icenowy.me> wrote:

Hi,

> The suniv SoC has a USB OTG controller and a USB PHY like other
> Allwinner SoCs.
> 
> Add their device tree node.

Looks alright to me, checked against the manual, also compared against
some other Allwinner USB DT nodes. Also passes the binding and DTB checks.

Just one small question below, but nevertheless:

Reviewed-by: Andre Przywara <andre.przywara at arm.com>

> Signed-off-by: Icenowy Zheng <uwu at icenowy.me>
> ---
> No changes since v1.
> 
>  arch/arm/boot/dts/suniv-f1c100s.dtsi | 26 ++++++++++++++++++++++++++
>  1 file changed, 26 insertions(+)
> 
> diff --git a/arch/arm/boot/dts/suniv-f1c100s.dtsi b/arch/arm/boot/dts/suniv-f1c100s.dtsi
> index 0edc1724407b..a01541ba42c5 100644
> --- a/arch/arm/boot/dts/suniv-f1c100s.dtsi
> +++ b/arch/arm/boot/dts/suniv-f1c100s.dtsi
> @@ -133,6 +133,32 @@ mmc1: mmc at 1c10000 {
>  			#size-cells = <0>;
>  		};
>  
> +		usb_otg: usb at 1c13000 {
> +			compatible = "allwinner,suniv-f1c100s-musb";
> +			reg = <0x01c13000 0x0400>;
> +			clocks = <&ccu CLK_BUS_OTG>;
> +			resets = <&ccu RST_BUS_OTG>;
> +			interrupts = <26>;
> +			interrupt-names = "mc";
> +			phys = <&usbphy 0>;
> +			phy-names = "usb";
> +			extcon = <&usbphy 0>;
> +			allwinner,sram = <&otg_sram 1>;

What is this "1" for? I see it all over the other Allwinner SRAM
properties, but can't find any documentation about that number, nor can I
see that it would be used in the code.

Does anyone know?

Cheers,
Andre

> +			status = "disabled";
> +		};
> +
> +		usbphy: phy at 1c13400 {
> +			compatible = "allwinner,suniv-f1c100s-usb-phy";
> +			reg = <0x01c13400 0x10>;
> +			reg-names = "phy_ctrl";
> +			clocks = <&ccu CLK_USB_PHY0>;
> +			clock-names = "usb0_phy";
> +			resets = <&ccu RST_USB_PHY0>;
> +			reset-names = "usb0_reset";
> +			#phy-cells = <1>;
> +			status = "disabled";
> +		};
> +
>  		ccu: clock at 1c20000 {
>  			compatible = "allwinner,suniv-f1c100s-ccu";
>  			reg = <0x01c20000 0x400>;