[PATCH] ARM: dts: stm32: update vbus-supply of usbphyc_port0 on stm32mp157c-ev1
Alexandre TORGUE
alexandre.torgue at foss.st.com
Mon Oct 24 01:25:53 PDT 2022
Hi Fabrice
On 9/30/22 17:02, Fabrice Gasnier wrote:
> From: Amelie Delaunay <amelie.delaunay at foss.st.com>
>
> phy-stm32-usbphyc bindings uses a connector node with vbus-supply
> property.
>
> Signed-off-by: Amelie Delaunay <amelie.delaunay at foss.st.com>
> Signed-off-by: Fabrice Gasnier <fabrice.gasnier at foss.st.com>
> ---
> arch/arm/boot/dts/stm32mp157c-ev1.dts | 5 +++++
> 1 file changed, 5 insertions(+)
>
> diff --git a/arch/arm/boot/dts/stm32mp157c-ev1.dts b/arch/arm/boot/dts/stm32mp157c-ev1.dts
> index d142dd30e16b..e22e394832a8 100644
> --- a/arch/arm/boot/dts/stm32mp157c-ev1.dts
> +++ b/arch/arm/boot/dts/stm32mp157c-ev1.dts
> @@ -385,6 +385,11 @@ &usbphyc_port0 {
> st,tune-squelch-level = <3>;
> st,tune-hs-rx-offset = <2>;
> st,no-lsfs-sc;
> +
> + connector {
> + compatible = "usb-a-connector";
> + vbus-supply = <&vbus_sw>;
> + };
> };
>
> &usbphyc_port1 {
Applied on stm32-next.
Thanks
Alex
More information about the linux-arm-kernel
mailing list