[PATCH 1/4] ARM: dts: imx6qdl-sabre*: fix Egalax touchscreen properties

[Shawn Guo]

On Mon, Sep 19, 2022 at 09:26:05PM -0700, Dmitry Torokhov wrote:
> This patch fixes interrupt trigger (should be level low as that is what the
> driver is always using), the GPIO that is the interrupt source that is also
> used to wake up chip by driving the line low.
> 
> The proper polarity is be needed for converting the driver to gpiod API.
> 
> Signed-off-by: Dmitry Torokhov <dmitry.torokhov at gmail.com>

Looks good to me.  Let me know if you want me to pick it up.  Otherwise,

Acked-by: Shawn Guo <shawnguo at kernel.org>

Shawn

> ---
>  arch/arm/boot/dts/imx6qdl-sabreauto.dtsi | 4 ++--
>  arch/arm/boot/dts/imx6qdl-sabresd.dtsi   | 8 ++++----
>  2 files changed, 6 insertions(+), 6 deletions(-)
> 
> diff --git a/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi b/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi
> index 1368a4762037..1883350d004e 100644
> --- a/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi
> +++ b/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi
> @@ -451,8 +451,8 @@ touchscreen at 4 {
>  		pinctrl-names = "default";
>  		pinctrl-0 = <&pinctrl_egalax_int>;
>  		interrupt-parent = <&gpio2>;
> -		interrupts = <28 IRQ_TYPE_EDGE_FALLING>;
> -		wakeup-gpios = <&gpio2 28 GPIO_ACTIVE_HIGH>;
> +		interrupts = <28 IRQ_TYPE_LEVEL_LOW>;
> +		wakeup-gpios = <&gpio2 28 GPIO_ACTIVE_LOW>;
>  	};
>  };
>  
> diff --git a/arch/arm/boot/dts/imx6qdl-sabresd.dtsi b/arch/arm/boot/dts/imx6qdl-sabresd.dtsi
> index 37482a9023fc..09f4c2fa3ad6 100644
> --- a/arch/arm/boot/dts/imx6qdl-sabresd.dtsi
> +++ b/arch/arm/boot/dts/imx6qdl-sabresd.dtsi
> @@ -311,8 +311,8 @@ touchscreen at 4 {
>  		pinctrl-names = "default";
>  		pinctrl-0 = <&pinctrl_i2c2_egalax_int>;
>  		interrupt-parent = <&gpio6>;
> -		interrupts = <8 IRQ_TYPE_EDGE_FALLING>;
> -		wakeup-gpios = <&gpio6 8 GPIO_ACTIVE_HIGH>;
> +		interrupts = <8 IRQ_TYPE_LEVEL_LOW>;
> +		wakeup-gpios = <&gpio6 8 GPIO_ACTIVE_LOW>;
>  	};
>  
>  	ov5640: camera at 3c {
> @@ -450,8 +450,8 @@ egalax_ts at 4 {
>  		compatible = "eeti,egalax_ts";
>  		reg = <0x04>;
>  		interrupt-parent = <&gpio6>;
> -		interrupts = <7 2>;
> -		wakeup-gpios = <&gpio6 7 0>;
> +		interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
> +		wakeup-gpios = <&gpio6 7 GPIO_ACTIVE_LOW>;
>  	};
>  
>  	magnetometer at e {
> -- 
> 2.37.3.968.ga6b4b080e4-goog
>