[PATCH v12,1/3] soc: mediatek: Add all settings to mtk_mmsys_ddp_dpi_fmt_config func
xinlei.lee
xinlei.lee at mediatek.com
Sat Oct 22 02:59:37 PDT 2022
On Fri, 2022-10-21 at 11:14 -0400, Nícolas F. R. A. Prado wrote:
> On Fri, Oct 21, 2022 at 07:59:02PM +0800, xinlei.lee wrote:
> > On Thu, 2022-10-20 at 12:33 -0400, Nícolas F. R. A. Prado wrote:
> > > Hi,
> > >
> > > On Wed, Oct 19, 2022 at 10:52:14AM +0800, xinlei.lee at mediatek.com
> > > wrote:
> > > > From: Xinlei Lee <xinlei.lee at mediatek.com>
> > > >
> > > > The difference between MT8186 and other ICs is that when
> > > > modifying
> > > > the
> > > > output format, we need to modify the mmsys_base+0x400 register
> > > > to
> > > > take
> > > > effect.
> > > > So when setting the dpi output format, we need to call
> > > > mmsys_func
> > > > to set
> > >
> > > mmsys_func isn't something that exists in the code. Instead
> > > mention
> > > the actual
> > > function name: mtk_mmsys_ddp_dpi_fmt_config.
> > >
> > > > it to MT8186 synchronously.
> > >
> > >
> > > Here, before saying that the commit adds all the settings for
> > > dpi,
> > > you could
> > > have mentioned that the previous commit lacked those, to make it
> > > clearer:
> > >
> > > Commit a071e52f75d1 ("soc: mediatek: Add mmsys func to adapt to
> > > dpi
> > > output for MT8186")
> > > lacked some of the possible output formats and also had a wrong
> > > bitmask.
> > >
> > >
> > > > Adding mmsys all the settings that need to be modified with dpi
> > > > are
> > > > for
> > > > mt8186.
> > >
> > > This sentence I would change to the following one:
> > >
> > > Add the missing output formats and fix the bitmask.
> > >
> > >
> > > Finally, you're also making the function more HW-agnostic
> > > (although
> > > in my
> > > opinion this could've been a future separate commit), so it's
> > > worth
> > > mentioning
> > > it here:
> > >
> > > While at it, also update mtk_mmsys_ddp_dpi_fmt_config() to use
> > > generic formats,
> > > so that it is slightly easier to extend for other platforms.
> > >
> > > >
> > > > Fixes: a071e52f75d1 ("soc: mediatek: Add mmsys func to adapt to
> > > > dpi
> > > > output for MT8186")
> > >
> > > The fixes tag should be kept in a single line, without wrapping.
> > >
> > > >
> > > > Signed-off-by: Xinlei Lee <xinlei.lee at mediatek.com>
> > > > Reviewed-by: AngeloGioacchino Del Regno <
> > > > angelogioacchino.delregno at collabora.com>
> > > > Reviewed-by: CK Hu <ck.hu at mediatek.com>
> > > > ---
> > > > drivers/soc/mediatek/mt8186-mmsys.h | 8 +++++---
> > > > drivers/soc/mediatek/mtk-mmsys.c | 27
> > > > ++++++++++++++++++++
> > > > ------
> > > > include/linux/soc/mediatek/mtk-mmsys.h | 7 +++++++
> > > > 3 files changed, 33 insertions(+), 9 deletions(-)
> > > >
> > > > diff --git a/drivers/soc/mediatek/mt8186-mmsys.h
> > > > b/drivers/soc/mediatek/mt8186-mmsys.h
> > > > index 09b1ccbc0093..035aec1eb616 100644
> > > > --- a/drivers/soc/mediatek/mt8186-mmsys.h
> > > > +++ b/drivers/soc/mediatek/mt8186-mmsys.h
> > > > @@ -5,9 +5,11 @@
> > > >
> > > > /* Values for DPI configuration in MMSYS address space */
> > > > #define MT8186_MMSYS_DPI_OUTPUT_FORMAT 0x400
> > > > -#define DPI_FORMAT_MASK
> > > > 0x1
> > > > -#define DPI_RGB888_DDR_CON BIT(0)
> > > > -#define DPI_RGB565_SDR_CON BIT(1)
> > > > +#define DPI_FORMAT_MASK
> > > > GENMASK
> > > > (1, 0)
> > > > +#define DPI_RGB888_SDR_CON 0
> > > > +#define DPI_RGB888_DDR_CON 1
> > > > +#define DPI_RGB565_SDR_CON 2
> > > > +#define DPI_RGB565_DDR_CON 3
> > >
> > > These defines should all have a MT8186_ prefix. This will avoid
> > > confusions now
> > > that mtk_mmsys_ddp_dpi_fmt_config() is being made more platform-
> > > agnostic.
> > >
> > > >
> > > > #define MT8186_MMSYS_OVL_CON 0xF04
> > > > #define MT8186_MMSYS_OVL0_CON_MASK 0x3
> > > > diff --git a/drivers/soc/mediatek/mtk-mmsys.c
> > > > b/drivers/soc/mediatek/mtk-mmsys.c
> > > > index d2c7a87aab87..205f6de45851 100644
> > > > --- a/drivers/soc/mediatek/mtk-mmsys.c
> > > > +++ b/drivers/soc/mediatek/mtk-mmsys.c
> > > > @@ -238,12 +238,27 @@ static void mtk_mmsys_update_bits(struct
> > > > mtk_mmsys *mmsys, u32 offset, u32 mask,
> > > >
> > > > void mtk_mmsys_ddp_dpi_fmt_config(struct device *dev, u32 val)
> > > > {
> > > > - if (val)
> > > > - mtk_mmsys_update_bits(dev_get_drvdata(dev),
> > > > MT8186_MMSYS_DPI_OUTPUT_FORMAT,
> > > > - DPI_RGB888_DDR_CON,
> > > > DPI_FORMAT_MASK);
> > > > - else
> > > > - mtk_mmsys_update_bits(dev_get_drvdata(dev),
> > > > MT8186_MMSYS_DPI_OUTPUT_FORMAT,
> > > > - DPI_RGB565_SDR_CON,
> > > > DPI_FORMAT_MASK);
> > > > + struct mtk_mmsys *mmsys = dev_get_drvdata(dev);
> > > > +
> > > > + switch (val) {
> > > > + case MTK_DPI_RGB888_SDR_CON:
> > > > + mtk_mmsys_update_bits(mmsys,
> > > > MT8186_MMSYS_DPI_OUTPUT_FORMAT,
> > > > + DPI_FORMAT_MASK,
> > > > DPI_RGB888_SDR_CON);
> > > > + break;
> > > > + case MTK_DPI_RGB565_SDR_CON:
> > > > + mtk_mmsys_update_bits(mmsys,
> > > > MT8186_MMSYS_DPI_OUTPUT_FORMAT,
> > > > + DPI_FORMAT_MASK,
> > > > DPI_RGB565_SDR_CON);
> > > > + break;
> > > > + case MTK_DPI_RGB565_DDR_CON:
> > > > + mtk_mmsys_update_bits(mmsys,
> > > > MT8186_MMSYS_DPI_OUTPUT_FORMAT,
> > > > + DPI_FORMAT_MASK,
> > > > DPI_RGB565_DDR_CON);
> > > > + break;
> > > > + case MTK_DPI_RGB888_DDR_CON:
> > > > + default:
> > > > + mtk_mmsys_update_bits(mmsys,
> > > > MT8186_MMSYS_DPI_OUTPUT_FORMAT,
> > > > + DPI_FORMAT_MASK,
> > > > DPI_RGB888_DDR_CON);
> > > > + break;
> > > > + }
> > >
> > > To be honest I don't really see the point of making the function
> > > slightly more
> > > platform-agnostic like this. With a single platform making use of
> > > it
> > > it's just
> > > an unneeded extra abstraction, and it could easily be done when a
> > > second
> > > platform starts requiring this as well...
> > >
> > > In any case,
> > >
> > > Reviewed-by: Nícolas F. R. A. Prado <nfraprado at collabora.com>
> > >
> > > Thanks,
> > > Nícolas
> > >
> > > > }
> > >
> > > [..]
> >
> > Hi Nícolas:
> >
> > Thanks for your detailed reply and correction.
> > Before sending out the next edition, I have two questions I would
> > like
> > to confirm with you in response to your responses:
> > 1.While at it, also update mtk_mmsys_ddp_dpi_fmt_config() to use
> > generic formats, so that it is slightly easier to extend for other
> > platforms.
> > => This is to make this mtk_mmsys_ddp_dpi_fmt_config() func more
> > general?
> > This function may only be used by MT8186, because only MT8186
> > has
> > corresponding modifications on HW, and enables the registers
> > reserved
> > in mmsys for dpi use to control the output format. Because this
> > register is not defined for other ic, I added control to this
> > function
> > call in mtk_dpi.c. If you think there are other ways to make it
> > look
> > more generic, where should I correct it?
>
> You already made the mtk_mmsys_ddp_dpi_fmt_config() more generic by
> making it's
> format parameter decoupled from its register representation on
> MT8186, that is,
> MTK_DPI_RGB888_SDR_CON instead of DPI_RGB888_SDR_CON.
>
> I wasn't asking for any code modification on that comment, I was
> suggesting you
> add this sentence in the commit message, so it reflects the changes
> you're
> already doing.
>
> To be extra clear, I was suggesting you update the commit message to
> the
> following:
>
> The difference between MT8186 and other ICs is that when modifying
> the output
> format, we need to modify the mmsys_base+0x400 register to take
> effect. So when
> setting the dpi output format, we need to call
> mtk_mmsys_ddp_dpi_fmt_config to
> set it to MT8186 synchronously.
>
> Commit a071e52f75d1 ("soc: mediatek: Add mmsys func to adapt to dpi
> output for
> MT8186") lacked some of the possible output formats and also had a
> wrong
> bitmask.
>
> Add the missing output formats and fix the bitmask.
>
> While at it, also update mtk_mmsys_ddp_dpi_fmt_config() to use
> generic formats,
> so that it is slightly easier to extend for other platforms.
>
> Fixes: a071e52f75d1 ("soc: mediatek: Add mmsys func to adapt to dpi
> output for MT8186")
>
> >
> > 2. These definitions should all have a MT8186_ prefix. This will
> > avoid
> > confusion as mtk_mmsys_ddp_dpi_fmt_config() becomes more platform
> > independent.
> >
> > Honestly, I don't really see the point of making the feature
> > platform-
> > agnostic like this. Using it on a single platform is just an extra
> > abstraction that isn't needed, when a second platform starts
> > needing
> > it too, it can be done easily...
> >
> > => My understanding here is that prefixing variables with labels
> > is
> > more conducive to making functions generic, and can be reused if
> > there
> > is such a situation in the future. I understand the importance of
> > keeping the function platform agnostic, but as mentioned, it may
> > only
> > be used by the MT8186 if there are special cases where other ICs
> > may
> > rely on mtk_mmsys_update_bits to create new functions.
>
> What I'm saying is that, even though you've made the function receive
> a generic
> format as a parameter, like MTK_DPI_RGB888_SDR_CON, at this point in
> time
> MT8186 is the only SoC that has a register in mmsys for it, so the
> values
>
> DPI_FORMAT_MASK
> DPI_RGB888_SDR_CON
> DPI_RGB888_DDR_CON
> DPI_RGB565_SDR_CON
> DPI_RGB565_DDR_CON
>
> are really all MT8186-specific, at least at this point. Leaving them
> without the
> MT8186_ can give the false impression that they're already used
> elsewhere. Also
> it's really easy to mistake them for the generic ones (like
> MTK_DPI_RGB888_SDR_CON). MT8186_MMSYS_DPI_OUTPUT_FORMAT already has
> the MT8186_
> prefix, so I'm really just saying that the other ones should have as
> well.
>
> If/when the same address, mask or values for this register start
> being used on a
> different SoC, then you can remove the prefix and move it to the mtk-
> mmsys.h
> generic header.
>
> But for now adding the prefixes will avoid confusion and make it
> clear this is
> MT8186 specific.
>
> Thanks,
> Nícolas
Hi Nícolas:
Thanks for the detailed explanation and correction, I understand that
these values in the mt8186-mmsys.h file should be given:
DPI_FORMAT_MASK
DPI_RGB888_SDR_CON
DPI_RGB888_DDR_CON
DPI_RGB565_SDR_CON
DPI_RGB565_DDR_CON
Add the prefix of MT8186_ to avoid confusion, it does look generic in
the mtk_mmsys_update_bits() function.
Thanks again for your suggestion, I will revise it in the next edition.
Best Regards!
xinlei
More information about the linux-arm-kernel
mailing list