[PATCH 08/11] ARM: mmp: remove all board files
Arnd Bergmann
arnd at kernel.org
Fri Oct 21 08:49:38 PDT 2022
From: Arnd Bergmann <arnd at arndb.de>
The old-style board files were marked as 'unused' a while ago
and can now be removed for good, leaving only devicetree based
boot support.
Signed-off-by: Arnd Bergmann <arnd at arndb.de>
---
arch/arm/configs/pxa168_defconfig | 3 -
arch/arm/configs/pxa910_defconfig | 2 -
arch/arm/mach-mmp/Kconfig | 96 --------
arch/arm/mach-mmp/Makefile | 9 -
arch/arm/mach-mmp/aspenite.c | 284 ---------------------
arch/arm/mach-mmp/avengers_lite.c | 55 -----
arch/arm/mach-mmp/brownstone.c | 237 ------------------
arch/arm/mach-mmp/flint.c | 131 ----------
arch/arm/mach-mmp/gplugd.c | 206 ----------------
arch/arm/mach-mmp/jasper.c | 185 --------------
arch/arm/mach-mmp/mfp-mmp2.h | 396 ------------------------------
arch/arm/mach-mmp/mfp-pxa168.h | 355 --------------------------
arch/arm/mach-mmp/mfp-pxa910.h | 170 -------------
arch/arm/mach-mmp/teton_bga.c | 100 --------
arch/arm/mach-mmp/teton_bga.h | 22 --
arch/arm/mach-mmp/ttc_dkb.c | 315 ------------------------
16 files changed, 2566 deletions(-)
delete mode 100644 arch/arm/mach-mmp/aspenite.c
delete mode 100644 arch/arm/mach-mmp/avengers_lite.c
delete mode 100644 arch/arm/mach-mmp/brownstone.c
delete mode 100644 arch/arm/mach-mmp/flint.c
delete mode 100644 arch/arm/mach-mmp/gplugd.c
delete mode 100644 arch/arm/mach-mmp/jasper.c
delete mode 100644 arch/arm/mach-mmp/mfp-mmp2.h
delete mode 100644 arch/arm/mach-mmp/mfp-pxa168.h
delete mode 100644 arch/arm/mach-mmp/mfp-pxa910.h
delete mode 100644 arch/arm/mach-mmp/teton_bga.c
delete mode 100644 arch/arm/mach-mmp/teton_bga.h
delete mode 100644 arch/arm/mach-mmp/ttc_dkb.c
diff --git a/arch/arm/configs/pxa168_defconfig b/arch/arm/configs/pxa168_defconfig
index 826ebbef2e3c..8422ddc9bab2 100644
--- a/arch/arm/configs/pxa168_defconfig
+++ b/arch/arm/configs/pxa168_defconfig
@@ -1,9 +1,6 @@
CONFIG_SYSVIPC=y
CONFIG_SYSFS_DEPRECATED_V2=y
# CONFIG_BLK_DEV_BSG is not set
-CONFIG_MACH_ASPENITE=y
-CONFIG_MACH_ZYLONITE2=y
-CONFIG_MACH_AVENGERS_LITE=y
CONFIG_NO_HZ_IDLE=y
CONFIG_HIGH_RES_TIMERS=y
CONFIG_PREEMPT=y
diff --git a/arch/arm/configs/pxa910_defconfig b/arch/arm/configs/pxa910_defconfig
index 353008de5678..48e41ca582af 100644
--- a/arch/arm/configs/pxa910_defconfig
+++ b/arch/arm/configs/pxa910_defconfig
@@ -11,8 +11,6 @@ CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
# CONFIG_BLK_DEV_BSG is not set
-CONFIG_MACH_TAVOREVB=y
-CONFIG_MACH_TTC_DKB=y
CONFIG_AEABI=y
CONFIG_FPE_NWFPE=y
CONFIG_SLAB=y
diff --git a/arch/arm/mach-mmp/Kconfig b/arch/arm/mach-mmp/Kconfig
index da38106149c4..a1396c495b85 100644
--- a/arch/arm/mach-mmp/Kconfig
+++ b/arch/arm/mach-mmp/Kconfig
@@ -13,99 +13,6 @@ if ARCH_MMP
menu "Marvell PXA168/910/MMP2 Implementations"
-if ATAGS
-
-config MACH_ASPENITE
- bool "Marvell's PXA168 Aspenite Development Board"
- depends on ARCH_MULTI_V5
- depends on UNUSED_BOARD_FILES
- select CPU_PXA168
- help
- Say 'Y' here if you want to support the Marvell PXA168-based
- Aspenite Development Board.
-
-config MACH_ZYLONITE2
- bool "Marvell's PXA168 Zylonite2 Development Board"
- depends on ARCH_MULTI_V5
- depends on UNUSED_BOARD_FILES
- select CPU_PXA168
- help
- Say 'Y' here if you want to support the Marvell PXA168-based
- Zylonite2 Development Board.
-
-config MACH_AVENGERS_LITE
- bool "Marvell's PXA168 Avengers Lite Development Board"
- depends on ARCH_MULTI_V5
- depends on UNUSED_BOARD_FILES
- select CPU_PXA168
- help
- Say 'Y' here if you want to support the Marvell PXA168-based
- Avengers Lite Development Board.
-
-config MACH_TTC_DKB
- bool "Marvell's PXA910 TavorEVB/TTC_DKB Development Board"
- depends on ARCH_MULTI_V5
- depends on UNUSED_BOARD_FILES
- select CPU_PXA910
- help
- Say 'Y' here if you want to support the Marvell PXA910-based
- TTC_DKB Development Board.
-
-config MACH_BROWNSTONE
- bool "Marvell's Brownstone Development Platform"
- depends on ARCH_MULTI_V7
- depends on UNUSED_BOARD_FILES
- select CPU_MMP2
- help
- Say 'Y' here if you want to support the Marvell MMP2-based
- Brown Development Platform.
- MMP2-based board can't be co-existed with PXA168-based &
- PXA910-based development board. Since MMP2 is compatible to
- ARMv7 architecture.
-
-config MACH_FLINT
- bool "Marvell's Flint Development Platform"
- depends on ARCH_MULTI_V7
- depends on UNUSED_BOARD_FILES
- select CPU_MMP2
- help
- Say 'Y' here if you want to support the Marvell MMP2-based
- Flint Development Platform.
- MMP2-based board can't be co-existed with PXA168-based &
- PXA910-based development board. Since MMP2 is compatible to
- ARMv7 architecture.
-
-config MACH_MARVELL_JASPER
- bool "Marvell's Jasper Development Platform"
- depends on ARCH_MULTI_V7
- depends on UNUSED_BOARD_FILES
- select CPU_MMP2
- help
- Say 'Y' here if you want to support the Marvell MMP2-base
- Jasper Development Platform.
- MMP2-based board can't be co-existed with PXA168-based &
- PXA910-based development board. Since MMP2 is compatible to
- ARMv7 architecture.
-
-config MACH_TETON_BGA
- bool "Marvell's PXA168 Teton BGA Development Board"
- depends on ARCH_MULTI_V5
- depends on UNUSED_BOARD_FILES
- select CPU_PXA168
- help
- Say 'Y' here if you want to support the Marvell PXA168-based
- Teton BGA Development Board.
-
-config MACH_GPLUGD
- bool "Marvell's PXA168 GuruPlug Display (gplugD) Board"
- depends on ARCH_MULTI_V5
- depends on UNUSED_BOARD_FILES
- select CPU_PXA168
- help
- Say 'Y' here if you want to support the Marvell PXA168-based
- GuruPlug Display (gplugD) Board
-endif
-
config MACH_MMP_DT
bool "Support MMP (ARMv5) platforms from device tree"
depends on ARCH_MULTI_V5
@@ -178,7 +85,4 @@ config USB_EHCI_MV_U2O
help
Enables support for OTG controller which can be switched to host mode.
-config MMP_SRAM
- bool
-
endif
diff --git a/arch/arm/mach-mmp/Makefile b/arch/arm/mach-mmp/Makefile
index 539d750aaf10..65cc9b691983 100644
--- a/arch/arm/mach-mmp/Makefile
+++ b/arch/arm/mach-mmp/Makefile
@@ -19,15 +19,6 @@ obj-$(CONFIG_MACH_MMP3_DT) += platsmp.o
endif
# board support
-obj-$(CONFIG_MACH_ASPENITE) += aspenite.o
-obj-$(CONFIG_MACH_ZYLONITE2) += aspenite.o
-obj-$(CONFIG_MACH_AVENGERS_LITE)+= avengers_lite.o
-obj-$(CONFIG_MACH_TTC_DKB) += ttc_dkb.o
-obj-$(CONFIG_MACH_BROWNSTONE) += brownstone.o
-obj-$(CONFIG_MACH_FLINT) += flint.o
-obj-$(CONFIG_MACH_MARVELL_JASPER) += jasper.o
obj-$(CONFIG_MACH_MMP_DT) += mmp-dt.o
obj-$(CONFIG_MACH_MMP2_DT) += mmp2-dt.o
obj-$(CONFIG_MACH_MMP3_DT) += mmp3.o
-obj-$(CONFIG_MACH_TETON_BGA) += teton_bga.o
-obj-$(CONFIG_MACH_GPLUGD) += gplugd.o
diff --git a/arch/arm/mach-mmp/aspenite.c b/arch/arm/mach-mmp/aspenite.c
deleted file mode 100644
index 6314824b62fc..000000000000
--- a/arch/arm/mach-mmp/aspenite.c
+++ /dev/null
@@ -1,284 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * linux/arch/arm/mach-mmp/aspenite.c
- *
- * Support for the Marvell PXA168-based Aspenite and Zylonite2
- * Development Platform.
- */
-#include <linux/gpio.h>
-#include <linux/gpio-pxa.h>
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/platform_device.h>
-#include <linux/smc91x.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-#include <linux/mtd/rawnand.h>
-#include <linux/interrupt.h>
-#include <linux/platform_data/mv_usb.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <video/pxa168fb.h>
-#include <linux/input.h>
-#include <linux/platform_data/keypad-pxa27x.h>
-
-#include "addr-map.h"
-#include "mfp-pxa168.h"
-#include "pxa168.h"
-#include "pxa910.h"
-#include "irqs.h"
-#include "common.h"
-
-static unsigned long common_pin_config[] __initdata = {
- /* Data Flash Interface */
- GPIO0_DFI_D15,
- GPIO1_DFI_D14,
- GPIO2_DFI_D13,
- GPIO3_DFI_D12,
- GPIO4_DFI_D11,
- GPIO5_DFI_D10,
- GPIO6_DFI_D9,
- GPIO7_DFI_D8,
- GPIO8_DFI_D7,
- GPIO9_DFI_D6,
- GPIO10_DFI_D5,
- GPIO11_DFI_D4,
- GPIO12_DFI_D3,
- GPIO13_DFI_D2,
- GPIO14_DFI_D1,
- GPIO15_DFI_D0,
-
- /* Static Memory Controller */
- GPIO18_SMC_nCS0,
- GPIO34_SMC_nCS1,
- GPIO23_SMC_nLUA,
- GPIO25_SMC_nLLA,
- GPIO28_SMC_RDY,
- GPIO29_SMC_SCLK,
- GPIO35_SMC_BE1,
- GPIO36_SMC_BE2,
- GPIO27_GPIO, /* Ethernet IRQ */
-
- /* UART1 */
- GPIO107_UART1_RXD,
- GPIO108_UART1_TXD,
-
- /* SSP1 */
- GPIO113_I2S_MCLK,
- GPIO114_I2S_FRM,
- GPIO115_I2S_BCLK,
- GPIO116_I2S_RXD,
- GPIO117_I2S_TXD,
-
- /* LCD */
- GPIO56_LCD_FCLK_RD,
- GPIO57_LCD_LCLK_A0,
- GPIO58_LCD_PCLK_WR,
- GPIO59_LCD_DENA_BIAS,
- GPIO60_LCD_DD0,
- GPIO61_LCD_DD1,
- GPIO62_LCD_DD2,
- GPIO63_LCD_DD3,
- GPIO64_LCD_DD4,
- GPIO65_LCD_DD5,
- GPIO66_LCD_DD6,
- GPIO67_LCD_DD7,
- GPIO68_LCD_DD8,
- GPIO69_LCD_DD9,
- GPIO70_LCD_DD10,
- GPIO71_LCD_DD11,
- GPIO72_LCD_DD12,
- GPIO73_LCD_DD13,
- GPIO74_LCD_DD14,
- GPIO75_LCD_DD15,
- GPIO76_LCD_DD16,
- GPIO77_LCD_DD17,
- GPIO78_LCD_DD18,
- GPIO79_LCD_DD19,
- GPIO80_LCD_DD20,
- GPIO81_LCD_DD21,
- GPIO82_LCD_DD22,
- GPIO83_LCD_DD23,
-
- /* Keypad */
- GPIO109_KP_MKIN1,
- GPIO110_KP_MKIN0,
- GPIO111_KP_MKOUT7,
- GPIO112_KP_MKOUT6,
- GPIO121_KP_MKIN4,
-};
-
-static struct pxa_gpio_platform_data pxa168_gpio_pdata = {
- .irq_base = MMP_GPIO_TO_IRQ(0),
-};
-
-static struct smc91x_platdata smc91x_info = {
- .flags = SMC91X_USE_16BIT | SMC91X_NOWAIT,
-};
-
-static struct resource smc91x_resources[] = {
- [0] = {
- .start = SMC_CS1_PHYS_BASE + 0x300,
- .end = SMC_CS1_PHYS_BASE + 0xfffff,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = MMP_GPIO_TO_IRQ(27),
- .end = MMP_GPIO_TO_IRQ(27),
- .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
- }
-};
-
-static struct platform_device smc91x_device = {
- .name = "smc91x",
- .id = 0,
- .dev = {
- .platform_data = &smc91x_info,
- },
- .num_resources = ARRAY_SIZE(smc91x_resources),
- .resource = smc91x_resources,
-};
-
-static struct mtd_partition aspenite_nand_partitions[] = {
- {
- .name = "bootloader",
- .offset = 0,
- .size = SZ_1M,
- .mask_flags = MTD_WRITEABLE,
- }, {
- .name = "reserved",
- .offset = MTDPART_OFS_APPEND,
- .size = SZ_128K,
- .mask_flags = MTD_WRITEABLE,
- }, {
- .name = "reserved",
- .offset = MTDPART_OFS_APPEND,
- .size = SZ_8M,
- .mask_flags = MTD_WRITEABLE,
- }, {
- .name = "kernel",
- .offset = MTDPART_OFS_APPEND,
- .size = (SZ_2M + SZ_1M),
- .mask_flags = 0,
- }, {
- .name = "filesystem",
- .offset = MTDPART_OFS_APPEND,
- .size = SZ_32M + SZ_16M,
- .mask_flags = 0,
- }
-};
-
-static struct pxa3xx_nand_platform_data aspenite_nand_info = {
- .parts = aspenite_nand_partitions,
- .nr_parts = ARRAY_SIZE(aspenite_nand_partitions),
-};
-
-static struct i2c_board_info aspenite_i2c_info[] __initdata = {
- { I2C_BOARD_INFO("wm8753", 0x1b), },
-};
-
-static struct fb_videomode video_modes[] = {
- [0] = {
- .pixclock = 30120,
- .refresh = 60,
- .xres = 800,
- .yres = 480,
- .hsync_len = 1,
- .left_margin = 215,
- .right_margin = 40,
- .vsync_len = 1,
- .upper_margin = 34,
- .lower_margin = 10,
- .sync = FB_SYNC_VERT_HIGH_ACT | FB_SYNC_HOR_HIGH_ACT,
- },
-};
-
-struct pxa168fb_mach_info aspenite_lcd_info = {
- .id = "Graphic Frame",
- .modes = video_modes,
- .num_modes = ARRAY_SIZE(video_modes),
- .pix_fmt = PIX_FMT_RGB565,
- .io_pin_allocation_mode = PIN_MODE_DUMB_24,
- .dumb_mode = DUMB_MODE_RGB888,
- .active = 1,
- .panel_rbswap = 0,
- .invert_pixclock = 0,
-};
-
-static const unsigned int aspenite_matrix_key_map[] = {
- KEY(0, 6, KEY_UP), /* SW 4 */
- KEY(0, 7, KEY_DOWN), /* SW 5 */
- KEY(1, 6, KEY_LEFT), /* SW 6 */
- KEY(1, 7, KEY_RIGHT), /* SW 7 */
- KEY(4, 6, KEY_ENTER), /* SW 8 */
- KEY(4, 7, KEY_ESC), /* SW 9 */
-};
-
-static struct matrix_keymap_data aspenite_matrix_keymap_data = {
- .keymap = aspenite_matrix_key_map,
- .keymap_size = ARRAY_SIZE(aspenite_matrix_key_map),
-};
-
-static struct pxa27x_keypad_platform_data aspenite_keypad_info __initdata = {
- .matrix_key_rows = 5,
- .matrix_key_cols = 8,
- .matrix_keymap_data = &aspenite_matrix_keymap_data,
- .debounce_interval = 30,
-};
-
-#if IS_ENABLED(CONFIG_USB_EHCI_MV)
-static struct mv_usb_platform_data pxa168_sph_pdata = {
- .mode = MV_USB_MODE_HOST,
- .phy_init = pxa_usb_phy_init,
- .phy_deinit = pxa_usb_phy_deinit,
- .set_vbus = NULL,
-};
-#endif
-
-static void __init common_init(void)
-{
- mfp_config(ARRAY_AND_SIZE(common_pin_config));
-
- /* on-chip devices */
- pxa168_add_uart(1);
- pxa168_add_twsi(1, NULL, ARRAY_AND_SIZE(aspenite_i2c_info));
- pxa168_add_ssp(1);
- pxa168_add_nand(&aspenite_nand_info);
- pxa168_add_fb(&aspenite_lcd_info);
- pxa168_add_keypad(&aspenite_keypad_info);
- platform_device_add_data(&pxa168_device_gpio, &pxa168_gpio_pdata,
- sizeof(struct pxa_gpio_platform_data));
- platform_device_register(&pxa168_device_gpio);
-
- /* off-chip devices */
- platform_device_register(&smc91x_device);
-
-#if IS_ENABLED(CONFIG_USB_SUPPORT)
-#if IS_ENABLED(CONFIG_PHY_PXA_USB)
- platform_device_register(&pxa168_device_usb_phy);
-#endif
-
-#if IS_ENABLED(CONFIG_USB_EHCI_MV)
- pxa168_add_usb_host(&pxa168_sph_pdata);
-#endif
-#endif
-}
-
-MACHINE_START(ASPENITE, "PXA168-based Aspenite Development Platform")
- .map_io = mmp_map_io,
- .nr_irqs = MMP_NR_IRQS,
- .init_irq = pxa168_init_irq,
- .init_time = pxa168_timer_init,
- .init_machine = common_init,
- .restart = pxa168_restart,
-MACHINE_END
-
-MACHINE_START(ZYLONITE2, "PXA168-based Zylonite2 Development Platform")
- .map_io = mmp_map_io,
- .nr_irqs = MMP_NR_IRQS,
- .init_irq = pxa168_init_irq,
- .init_time = pxa168_timer_init,
- .init_machine = common_init,
- .restart = pxa168_restart,
-MACHINE_END
diff --git a/arch/arm/mach-mmp/avengers_lite.c b/arch/arm/mach-mmp/avengers_lite.c
deleted file mode 100644
index 12e5a9441df9..000000000000
--- a/arch/arm/mach-mmp/avengers_lite.c
+++ /dev/null
@@ -1,55 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * linux/arch/arm/mach-mmp/avengers_lite.c
- *
- * Support for the Marvell PXA168-based Avengers lite Development Platform.
- *
- * Copyright (C) 2009-2010 Marvell International Ltd.
- */
-
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/gpio-pxa.h>
-#include <linux/platform_device.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include "addr-map.h"
-#include "mfp-pxa168.h"
-#include "pxa168.h"
-#include "irqs.h"
-
-
-#include "common.h"
-#include <linux/delay.h>
-
-/* Avengers lite MFP configurations */
-static unsigned long avengers_lite_pin_config_V16F[] __initdata = {
- /* DEBUG_UART */
- GPIO88_UART2_TXD,
- GPIO89_UART2_RXD,
-};
-
-static struct pxa_gpio_platform_data pxa168_gpio_pdata = {
- .irq_base = MMP_GPIO_TO_IRQ(0),
-};
-
-static void __init avengers_lite_init(void)
-{
- mfp_config(ARRAY_AND_SIZE(avengers_lite_pin_config_V16F));
-
- /* on-chip devices */
- pxa168_add_uart(2);
- platform_device_add_data(&pxa168_device_gpio, &pxa168_gpio_pdata,
- sizeof(struct pxa_gpio_platform_data));
- platform_device_register(&pxa168_device_gpio);
-}
-
-MACHINE_START(AVENGERS_LITE, "PXA168 Avengers lite Development Platform")
- .map_io = mmp_map_io,
- .nr_irqs = MMP_NR_IRQS,
- .init_irq = pxa168_init_irq,
- .init_time = pxa168_timer_init,
- .init_machine = avengers_lite_init,
- .restart = pxa168_restart,
-MACHINE_END
diff --git a/arch/arm/mach-mmp/brownstone.c b/arch/arm/mach-mmp/brownstone.c
deleted file mode 100644
index ce93bc395546..000000000000
--- a/arch/arm/mach-mmp/brownstone.c
+++ /dev/null
@@ -1,237 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * linux/arch/arm/mach-mmp/brownstone.c
- *
- * Support for the Marvell Brownstone Development Platform.
- *
- * Copyright (C) 2009-2010 Marvell International Ltd.
- */
-
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-#include <linux/gpio-pxa.h>
-#include <linux/gpio/machine.h>
-#include <linux/regulator/machine.h>
-#include <linux/regulator/max8649.h>
-#include <linux/regulator/fixed.h>
-#include <linux/mfd/max8925.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include "addr-map.h"
-#include "mfp-mmp2.h"
-#include "mmp2.h"
-#include "irqs.h"
-
-#include "common.h"
-
-#define BROWNSTONE_NR_IRQS (MMP_NR_IRQS + 40)
-
-#define GPIO_5V_ENABLE (89)
-
-static unsigned long brownstone_pin_config[] __initdata = {
- /* UART1 */
- GPIO29_UART1_RXD,
- GPIO30_UART1_TXD,
-
- /* UART3 */
- GPIO51_UART3_RXD,
- GPIO52_UART3_TXD,
-
- /* DFI */
- GPIO168_DFI_D0,
- GPIO167_DFI_D1,
- GPIO166_DFI_D2,
- GPIO165_DFI_D3,
- GPIO107_DFI_D4,
- GPIO106_DFI_D5,
- GPIO105_DFI_D6,
- GPIO104_DFI_D7,
- GPIO111_DFI_D8,
- GPIO164_DFI_D9,
- GPIO163_DFI_D10,
- GPIO162_DFI_D11,
- GPIO161_DFI_D12,
- GPIO110_DFI_D13,
- GPIO109_DFI_D14,
- GPIO108_DFI_D15,
- GPIO143_ND_nCS0,
- GPIO144_ND_nCS1,
- GPIO147_ND_nWE,
- GPIO148_ND_nRE,
- GPIO150_ND_ALE,
- GPIO149_ND_CLE,
- GPIO112_ND_RDY0,
- GPIO160_ND_RDY1,
-
- /* PMIC */
- PMIC_PMIC_INT | MFP_LPM_EDGE_FALL,
-
- /* MMC0 */
- GPIO131_MMC1_DAT3 | MFP_PULL_HIGH,
- GPIO132_MMC1_DAT2 | MFP_PULL_HIGH,
- GPIO133_MMC1_DAT1 | MFP_PULL_HIGH,
- GPIO134_MMC1_DAT0 | MFP_PULL_HIGH,
- GPIO136_MMC1_CMD | MFP_PULL_HIGH,
- GPIO139_MMC1_CLK,
- GPIO140_MMC1_CD | MFP_PULL_LOW,
- GPIO141_MMC1_WP | MFP_PULL_LOW,
-
- /* MMC1 */
- GPIO37_MMC2_DAT3 | MFP_PULL_HIGH,
- GPIO38_MMC2_DAT2 | MFP_PULL_HIGH,
- GPIO39_MMC2_DAT1 | MFP_PULL_HIGH,
- GPIO40_MMC2_DAT0 | MFP_PULL_HIGH,
- GPIO41_MMC2_CMD | MFP_PULL_HIGH,
- GPIO42_MMC2_CLK,
-
- /* MMC2 */
- GPIO165_MMC3_DAT7 | MFP_PULL_HIGH,
- GPIO162_MMC3_DAT6 | MFP_PULL_HIGH,
- GPIO166_MMC3_DAT5 | MFP_PULL_HIGH,
- GPIO163_MMC3_DAT4 | MFP_PULL_HIGH,
- GPIO167_MMC3_DAT3 | MFP_PULL_HIGH,
- GPIO164_MMC3_DAT2 | MFP_PULL_HIGH,
- GPIO168_MMC3_DAT1 | MFP_PULL_HIGH,
- GPIO111_MMC3_DAT0 | MFP_PULL_HIGH,
- GPIO112_MMC3_CMD | MFP_PULL_HIGH,
- GPIO151_MMC3_CLK,
-
- /* 5V regulator */
- GPIO89_GPIO,
-};
-
-static struct pxa_gpio_platform_data mmp2_gpio_pdata = {
- .irq_base = MMP_GPIO_TO_IRQ(0),
-};
-
-static struct regulator_consumer_supply max8649_supply[] = {
- REGULATOR_SUPPLY("vcc_core", NULL),
-};
-
-static struct regulator_init_data max8649_init_data = {
- .constraints = {
- .name = "vcc_core range",
- .min_uV = 1150000,
- .max_uV = 1280000,
- .always_on = 1,
- .boot_on = 1,
- .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE,
- },
- .num_consumer_supplies = 1,
- .consumer_supplies = &max8649_supply[0],
-};
-
-static struct max8649_platform_data brownstone_max8649_info = {
- .mode = 2, /* VID1 = 1, VID0 = 0 */
- .extclk = 0,
- .ramp_timing = MAX8649_RAMP_32MV,
- .regulator = &max8649_init_data,
-};
-
-static struct regulator_consumer_supply brownstone_v_5vp_supplies[] = {
- REGULATOR_SUPPLY("v_5vp", NULL),
-};
-
-static struct regulator_init_data brownstone_v_5vp_data = {
- .constraints = {
- .valid_ops_mask = REGULATOR_CHANGE_STATUS,
- },
- .num_consumer_supplies = ARRAY_SIZE(brownstone_v_5vp_supplies),
- .consumer_supplies = brownstone_v_5vp_supplies,
-};
-
-static struct fixed_voltage_config brownstone_v_5vp = {
- .supply_name = "v_5vp",
- .microvolts = 5000000,
- .enabled_at_boot = 1,
- .init_data = &brownstone_v_5vp_data,
-};
-
-static struct platform_device brownstone_v_5vp_device = {
- .name = "reg-fixed-voltage",
- .id = 1,
- .dev = {
- .platform_data = &brownstone_v_5vp,
- },
-};
-
-static struct gpiod_lookup_table brownstone_v_5vp_gpiod_table = {
- .dev_id = "reg-fixed-voltage.1", /* .id set to 1 above */
- .table = {
- GPIO_LOOKUP("gpio-pxa", GPIO_5V_ENABLE,
- NULL, GPIO_ACTIVE_HIGH),
- { },
- },
-};
-
-static struct max8925_platform_data brownstone_max8925_info = {
- .irq_base = MMP_NR_IRQS,
-};
-
-static struct i2c_board_info brownstone_twsi1_info[] = {
- [0] = {
- .type = "max8649",
- .addr = 0x60,
- .platform_data = &brownstone_max8649_info,
- },
- [1] = {
- .type = "max8925",
- .addr = 0x3c,
- .irq = IRQ_MMP2_PMIC,
- .platform_data = &brownstone_max8925_info,
- },
-};
-
-static struct sdhci_pxa_platdata mmp2_sdh_platdata_mmc0 = {
- .clk_delay_cycles = 0x1f,
-};
-
-static struct sdhci_pxa_platdata mmp2_sdh_platdata_mmc2 = {
- .clk_delay_cycles = 0x1f,
- .flags = PXA_FLAG_CARD_PERMANENT
- | PXA_FLAG_SD_8_BIT_CAPABLE_SLOT,
-};
-
-static struct sram_platdata mmp2_asram_platdata = {
- .pool_name = "asram",
- .granularity = SRAM_GRANULARITY,
-};
-
-static struct sram_platdata mmp2_isram_platdata = {
- .pool_name = "isram",
- .granularity = SRAM_GRANULARITY,
-};
-
-static void __init brownstone_init(void)
-{
- mfp_config(ARRAY_AND_SIZE(brownstone_pin_config));
-
- /* on-chip devices */
- mmp2_add_uart(1);
- mmp2_add_uart(3);
- platform_device_add_data(&mmp2_device_gpio, &mmp2_gpio_pdata,
- sizeof(struct pxa_gpio_platform_data));
- platform_device_register(&mmp2_device_gpio);
- mmp2_add_twsi(1, NULL, ARRAY_AND_SIZE(brownstone_twsi1_info));
- mmp2_add_sdhost(0, &mmp2_sdh_platdata_mmc0); /* SD/MMC */
- mmp2_add_sdhost(2, &mmp2_sdh_platdata_mmc2); /* eMMC */
- mmp2_add_asram(&mmp2_asram_platdata);
- mmp2_add_isram(&mmp2_isram_platdata);
-
- /* enable 5v regulator */
- gpiod_add_lookup_table(&brownstone_v_5vp_gpiod_table);
- platform_device_register(&brownstone_v_5vp_device);
-}
-
-MACHINE_START(BROWNSTONE, "Brownstone Development Platform")
- /* Maintainer: Haojian Zhuang <haojian.zhuang at marvell.com> */
- .map_io = mmp_map_io,
- .nr_irqs = BROWNSTONE_NR_IRQS,
- .init_irq = mmp2_init_irq,
- .init_time = mmp2_timer_init,
- .init_machine = brownstone_init,
- .restart = mmp_restart,
-MACHINE_END
diff --git a/arch/arm/mach-mmp/flint.c b/arch/arm/mach-mmp/flint.c
deleted file mode 100644
index 9a7054368e55..000000000000
--- a/arch/arm/mach-mmp/flint.c
+++ /dev/null
@@ -1,131 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * linux/arch/arm/mach-mmp/flint.c
- *
- * Support for the Marvell Flint Development Platform.
- *
- * Copyright (C) 2009 Marvell International Ltd.
- */
-
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/platform_device.h>
-#include <linux/smc91x.h>
-#include <linux/io.h>
-#include <linux/gpio.h>
-#include <linux/gpio-pxa.h>
-#include <linux/interrupt.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include "addr-map.h"
-#include "mfp-mmp2.h"
-#include "mmp2.h"
-#include "irqs.h"
-
-#include "common.h"
-
-#define FLINT_NR_IRQS (MMP_NR_IRQS + 48)
-
-static unsigned long flint_pin_config[] __initdata = {
- /* UART1 */
- GPIO45_UART1_RXD,
- GPIO46_UART1_TXD,
-
- /* UART2 */
- GPIO47_UART2_RXD,
- GPIO48_UART2_TXD,
-
- /* SMC */
- GPIO151_SMC_SCLK,
- GPIO145_SMC_nCS0,
- GPIO146_SMC_nCS1,
- GPIO152_SMC_BE0,
- GPIO153_SMC_BE1,
- GPIO154_SMC_IRQ,
- GPIO113_SMC_RDY,
-
- /*Ethernet*/
- GPIO155_GPIO,
-
- /* DFI */
- GPIO168_DFI_D0,
- GPIO167_DFI_D1,
- GPIO166_DFI_D2,
- GPIO165_DFI_D3,
- GPIO107_DFI_D4,
- GPIO106_DFI_D5,
- GPIO105_DFI_D6,
- GPIO104_DFI_D7,
- GPIO111_DFI_D8,
- GPIO164_DFI_D9,
- GPIO163_DFI_D10,
- GPIO162_DFI_D11,
- GPIO161_DFI_D12,
- GPIO110_DFI_D13,
- GPIO109_DFI_D14,
- GPIO108_DFI_D15,
- GPIO143_ND_nCS0,
- GPIO144_ND_nCS1,
- GPIO147_ND_nWE,
- GPIO148_ND_nRE,
- GPIO150_ND_ALE,
- GPIO149_ND_CLE,
- GPIO112_ND_RDY0,
- GPIO160_ND_RDY1,
-};
-
-static struct pxa_gpio_platform_data mmp2_gpio_pdata = {
- .irq_base = MMP_GPIO_TO_IRQ(0),
-};
-
-static struct smc91x_platdata flint_smc91x_info = {
- .flags = SMC91X_USE_16BIT | SMC91X_NOWAIT,
-};
-
-static struct resource smc91x_resources[] = {
- [0] = {
- .start = SMC_CS1_PHYS_BASE + 0x300,
- .end = SMC_CS1_PHYS_BASE + 0xfffff,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = MMP_GPIO_TO_IRQ(155),
- .end = MMP_GPIO_TO_IRQ(155),
- .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
- }
-};
-
-static struct platform_device smc91x_device = {
- .name = "smc91x",
- .id = 0,
- .dev = {
- .platform_data = &flint_smc91x_info,
- },
- .num_resources = ARRAY_SIZE(smc91x_resources),
- .resource = smc91x_resources,
-};
-
-static void __init flint_init(void)
-{
- mfp_config(ARRAY_AND_SIZE(flint_pin_config));
-
- /* on-chip devices */
- mmp2_add_uart(1);
- mmp2_add_uart(2);
- platform_device_add_data(&mmp2_device_gpio, &mmp2_gpio_pdata,
- sizeof(struct pxa_gpio_platform_data));
- platform_device_register(&mmp2_device_gpio);
-
- /* off-chip devices */
- platform_device_register(&smc91x_device);
-}
-
-MACHINE_START(FLINT, "Flint Development Platform")
- .map_io = mmp_map_io,
- .nr_irqs = FLINT_NR_IRQS,
- .init_irq = mmp2_init_irq,
- .init_time = mmp2_timer_init,
- .init_machine = flint_init,
- .restart = mmp_restart,
-MACHINE_END
diff --git a/arch/arm/mach-mmp/gplugd.c b/arch/arm/mach-mmp/gplugd.c
deleted file mode 100644
index 5888b71944b8..000000000000
--- a/arch/arm/mach-mmp/gplugd.c
+++ /dev/null
@@ -1,206 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * linux/arch/arm/mach-mmp/gplugd.c
- *
- * Support for the Marvell PXA168-based GuruPlug Display (gplugD) Platform.
- */
-
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/gpio.h>
-#include <linux/gpio-pxa.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach-types.h>
-
-#include "irqs.h"
-#include "pxa168.h"
-#include "mfp-pxa168.h"
-
-#include "common.h"
-
-static unsigned long gplugd_pin_config[] __initdata = {
- /* UART3 */
- GPIO8_UART3_TXD,
- GPIO9_UART3_RXD,
- GPIO1O_UART3_CTS,
- GPIO11_UART3_RTS,
-
- /* USB OTG PEN */
- GPIO18_GPIO,
-
- /* MMC2 */
- GPIO28_MMC2_CMD,
- GPIO29_MMC2_CLK,
- GPIO30_MMC2_DAT0,
- GPIO31_MMC2_DAT1,
- GPIO32_MMC2_DAT2,
- GPIO33_MMC2_DAT3,
-
- /* LCD & HDMI clock selection GPIO: 0: 74.176MHz, 1: 74.25 MHz */
- GPIO35_GPIO,
- GPIO36_GPIO, /* CEC Interrupt */
-
- /* MMC1 */
- GPIO43_MMC1_CLK,
- GPIO49_MMC1_CMD,
- GPIO41_MMC1_DAT0,
- GPIO40_MMC1_DAT1,
- GPIO52_MMC1_DAT2,
- GPIO51_MMC1_DAT3,
- GPIO53_MMC1_CD,
-
- /* LCD */
- GPIO56_LCD_FCLK_RD,
- GPIO57_LCD_LCLK_A0,
- GPIO58_LCD_PCLK_WR,
- GPIO59_LCD_DENA_BIAS,
- GPIO60_LCD_DD0,
- GPIO61_LCD_DD1,
- GPIO62_LCD_DD2,
- GPIO63_LCD_DD3,
- GPIO64_LCD_DD4,
- GPIO65_LCD_DD5,
- GPIO66_LCD_DD6,
- GPIO67_LCD_DD7,
- GPIO68_LCD_DD8,
- GPIO69_LCD_DD9,
- GPIO70_LCD_DD10,
- GPIO71_LCD_DD11,
- GPIO72_LCD_DD12,
- GPIO73_LCD_DD13,
- GPIO74_LCD_DD14,
- GPIO75_LCD_DD15,
- GPIO76_LCD_DD16,
- GPIO77_LCD_DD17,
- GPIO78_LCD_DD18,
- GPIO79_LCD_DD19,
- GPIO80_LCD_DD20,
- GPIO81_LCD_DD21,
- GPIO82_LCD_DD22,
- GPIO83_LCD_DD23,
-
- /* GPIO */
- GPIO84_GPIO,
- GPIO85_GPIO,
-
- /* Fast-Ethernet*/
- GPIO86_TX_CLK,
- GPIO87_TX_EN,
- GPIO88_TX_DQ3,
- GPIO89_TX_DQ2,
- GPIO90_TX_DQ1,
- GPIO91_TX_DQ0,
- GPIO92_MII_CRS,
- GPIO93_MII_COL,
- GPIO94_RX_CLK,
- GPIO95_RX_ER,
- GPIO96_RX_DQ3,
- GPIO97_RX_DQ2,
- GPIO98_RX_DQ1,
- GPIO99_RX_DQ0,
- GPIO100_MII_MDC,
- GPIO101_MII_MDIO,
- GPIO103_RX_DV,
- GPIO104_GPIO, /* Reset PHY */
-
- /* RTC interrupt */
- GPIO102_GPIO,
-
- /* I2C */
- GPIO105_CI2C_SDA,
- GPIO106_CI2C_SCL,
-
- /* SPI NOR Flash on SSP2 */
- GPIO107_SSP2_RXD,
- GPIO108_SSP2_TXD,
- GPIO110_GPIO, /* SPI_CSn */
- GPIO111_SSP2_CLK,
-
- /* Select JTAG */
- GPIO109_GPIO,
-
- /* I2S */
- GPIO114_I2S_FRM,
- GPIO115_I2S_BCLK,
- GPIO116_I2S_TXD
-};
-
-static struct pxa_gpio_platform_data pxa168_gpio_pdata = {
- .irq_base = MMP_GPIO_TO_IRQ(0),
-};
-
-static struct i2c_board_info gplugd_i2c_board_info[] = {
- {
- .type = "isl1208",
- .addr = 0x6F,
- }
-};
-
-/* Bring PHY out of reset by setting GPIO 104 */
-static int gplugd_eth_init(void)
-{
- if (unlikely(gpio_request(104, "ETH_RESET_N"))) {
- printk(KERN_ERR "Can't get hold of GPIO 104 to bring Ethernet "
- "PHY out of reset\n");
- return -EIO;
- }
-
- gpio_direction_output(104, 1);
- gpio_free(104);
- return 0;
-}
-
-struct pxa168_eth_platform_data gplugd_eth_platform_data = {
- .port_number = 0,
- .phy_addr = 0,
- .speed = 0, /* Autonagotiation */
- .intf = PHY_INTERFACE_MODE_RMII,
- .init = gplugd_eth_init,
-};
-
-static void __init select_disp_freq(void)
-{
- /* set GPIO 35 & clear GPIO 85 to set LCD External Clock to 74.25 MHz */
- if (unlikely(gpio_request(35, "DISP_FREQ_SEL"))) {
- printk(KERN_ERR "Can't get hold of GPIO 35 to select display "
- "frequency\n");
- } else {
- gpio_direction_output(35, 1);
- gpio_free(35);
- }
-
- if (unlikely(gpio_request(85, "DISP_FREQ_SEL_2"))) {
- printk(KERN_ERR "Can't get hold of GPIO 85 to select display "
- "frequency\n");
- } else {
- gpio_direction_output(85, 0);
- gpio_free(85);
- }
-}
-
-static void __init gplugd_init(void)
-{
- mfp_config(ARRAY_AND_SIZE(gplugd_pin_config));
-
- select_disp_freq();
-
- /* on-chip devices */
- pxa168_add_uart(3);
- pxa168_add_ssp(1);
- pxa168_add_twsi(0, NULL, ARRAY_AND_SIZE(gplugd_i2c_board_info));
- platform_device_add_data(&pxa168_device_gpio, &pxa168_gpio_pdata,
- sizeof(struct pxa_gpio_platform_data));
- platform_device_register(&pxa168_device_gpio);
-
- pxa168_add_eth(&gplugd_eth_platform_data);
-}
-
-MACHINE_START(GPLUGD, "PXA168-based GuruPlug Display (gplugD) Platform")
- .map_io = mmp_map_io,
- .nr_irqs = MMP_NR_IRQS,
- .init_irq = pxa168_init_irq,
- .init_time = pxa168_timer_init,
- .init_machine = gplugd_init,
- .restart = pxa168_restart,
-MACHINE_END
diff --git a/arch/arm/mach-mmp/jasper.c b/arch/arm/mach-mmp/jasper.c
deleted file mode 100644
index 2578e176fd48..000000000000
--- a/arch/arm/mach-mmp/jasper.c
+++ /dev/null
@@ -1,185 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * linux/arch/arm/mach-mmp/jasper.c
- *
- * Support for the Marvell Jasper Development Platform.
- *
- * Copyright (C) 2009-2010 Marvell International Ltd.
- */
-
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/gpio-pxa.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-#include <linux/regulator/machine.h>
-#include <linux/regulator/max8649.h>
-#include <linux/mfd/max8925.h>
-#include <linux/interrupt.h>
-
-#include "irqs.h"
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include "addr-map.h"
-#include "mfp-mmp2.h"
-#include "mmp2.h"
-
-#include "common.h"
-
-#define JASPER_NR_IRQS (MMP_NR_IRQS + 48)
-
-static unsigned long jasper_pin_config[] __initdata = {
- /* UART1 */
- GPIO29_UART1_RXD,
- GPIO30_UART1_TXD,
-
- /* UART3 */
- GPIO51_UART3_RXD,
- GPIO52_UART3_TXD,
-
- /* DFI */
- GPIO168_DFI_D0,
- GPIO167_DFI_D1,
- GPIO166_DFI_D2,
- GPIO165_DFI_D3,
- GPIO107_DFI_D4,
- GPIO106_DFI_D5,
- GPIO105_DFI_D6,
- GPIO104_DFI_D7,
- GPIO111_DFI_D8,
- GPIO164_DFI_D9,
- GPIO163_DFI_D10,
- GPIO162_DFI_D11,
- GPIO161_DFI_D12,
- GPIO110_DFI_D13,
- GPIO109_DFI_D14,
- GPIO108_DFI_D15,
- GPIO143_ND_nCS0,
- GPIO144_ND_nCS1,
- GPIO147_ND_nWE,
- GPIO148_ND_nRE,
- GPIO150_ND_ALE,
- GPIO149_ND_CLE,
- GPIO112_ND_RDY0,
- GPIO160_ND_RDY1,
-
- /* PMIC */
- PMIC_PMIC_INT | MFP_LPM_EDGE_FALL,
-
- /* MMC1 */
- GPIO131_MMC1_DAT3,
- GPIO132_MMC1_DAT2,
- GPIO133_MMC1_DAT1,
- GPIO134_MMC1_DAT0,
- GPIO136_MMC1_CMD,
- GPIO139_MMC1_CLK,
- GPIO140_MMC1_CD,
- GPIO141_MMC1_WP,
-
- /* MMC2 */
- GPIO37_MMC2_DAT3,
- GPIO38_MMC2_DAT2,
- GPIO39_MMC2_DAT1,
- GPIO40_MMC2_DAT0,
- GPIO41_MMC2_CMD,
- GPIO42_MMC2_CLK,
-
- /* MMC3 */
- GPIO165_MMC3_DAT7,
- GPIO162_MMC3_DAT6,
- GPIO166_MMC3_DAT5,
- GPIO163_MMC3_DAT4,
- GPIO167_MMC3_DAT3,
- GPIO164_MMC3_DAT2,
- GPIO168_MMC3_DAT1,
- GPIO111_MMC3_DAT0,
- GPIO112_MMC3_CMD,
- GPIO151_MMC3_CLK,
-};
-
-static struct pxa_gpio_platform_data mmp2_gpio_pdata = {
- .irq_base = MMP_GPIO_TO_IRQ(0),
-};
-
-static struct regulator_consumer_supply max8649_supply[] = {
- REGULATOR_SUPPLY("vcc_core", NULL),
-};
-
-static struct regulator_init_data max8649_init_data = {
- .constraints = {
- .name = "vcc_core range",
- .min_uV = 1150000,
- .max_uV = 1280000,
- .always_on = 1,
- .boot_on = 1,
- .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE,
- },
- .num_consumer_supplies = 1,
- .consumer_supplies = &max8649_supply[0],
-};
-
-static struct max8649_platform_data jasper_max8649_info = {
- .mode = 2, /* VID1 = 1, VID0 = 0 */
- .extclk = 0,
- .ramp_timing = MAX8649_RAMP_32MV,
- .regulator = &max8649_init_data,
-};
-
-static struct max8925_backlight_pdata jasper_backlight_data = {
- .dual_string = 0,
-};
-
-static struct max8925_power_pdata jasper_power_data = {
- .batt_detect = 0, /* can't detect battery by ID pin */
- .topoff_threshold = MAX8925_TOPOFF_THR_10PER,
- .fast_charge = MAX8925_FCHG_1000MA,
-};
-
-static struct max8925_platform_data jasper_max8925_info = {
- .backlight = &jasper_backlight_data,
- .power = &jasper_power_data,
- .irq_base = MMP_NR_IRQS,
-};
-
-static struct i2c_board_info jasper_twsi1_info[] = {
- [0] = {
- .type = "max8649",
- .addr = 0x60,
- .platform_data = &jasper_max8649_info,
- },
- [1] = {
- .type = "max8925",
- .addr = 0x3c,
- .irq = IRQ_MMP2_PMIC,
- .platform_data = &jasper_max8925_info,
- },
-};
-
-static struct sdhci_pxa_platdata mmp2_sdh_platdata_mmc0 = {
- .clk_delay_cycles = 0x1f,
-};
-
-static void __init jasper_init(void)
-{
- mfp_config(ARRAY_AND_SIZE(jasper_pin_config));
-
- /* on-chip devices */
- mmp2_add_uart(1);
- mmp2_add_uart(3);
- mmp2_add_twsi(1, NULL, ARRAY_AND_SIZE(jasper_twsi1_info));
- platform_device_add_data(&mmp2_device_gpio, &mmp2_gpio_pdata,
- sizeof(struct pxa_gpio_platform_data));
- platform_device_register(&mmp2_device_gpio);
- mmp2_add_sdhost(0, &mmp2_sdh_platdata_mmc0); /* SD/MMC */
-
- regulator_has_full_constraints();
-}
-
-MACHINE_START(MARVELL_JASPER, "Jasper Development Platform")
- .map_io = mmp_map_io,
- .nr_irqs = JASPER_NR_IRQS,
- .init_irq = mmp2_init_irq,
- .init_time = mmp2_timer_init,
- .init_machine = jasper_init,
- .restart = mmp_restart,
-MACHINE_END
diff --git a/arch/arm/mach-mmp/mfp-mmp2.h b/arch/arm/mach-mmp/mfp-mmp2.h
deleted file mode 100644
index 1620222981e3..000000000000
--- a/arch/arm/mach-mmp/mfp-mmp2.h
+++ /dev/null
@@ -1,396 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_MACH_MFP_MMP2_H
-#define __ASM_MACH_MFP_MMP2_H
-
-#include "mfp.h"
-
-#define MFP_DRIVE_VERY_SLOW (0x0 << 13)
-#define MFP_DRIVE_SLOW (0x2 << 13)
-#define MFP_DRIVE_MEDIUM (0x4 << 13)
-#define MFP_DRIVE_FAST (0x6 << 13)
-
-/* GPIO */
-#define GPIO0_GPIO MFP_CFG(GPIO0, AF0)
-#define GPIO1_GPIO MFP_CFG(GPIO1, AF0)
-#define GPIO2_GPIO MFP_CFG(GPIO2, AF0)
-#define GPIO3_GPIO MFP_CFG(GPIO3, AF0)
-#define GPIO4_GPIO MFP_CFG(GPIO4, AF0)
-#define GPIO5_GPIO MFP_CFG(GPIO5, AF0)
-#define GPIO6_GPIO MFP_CFG(GPIO6, AF0)
-#define GPIO7_GPIO MFP_CFG(GPIO7, AF0)
-#define GPIO8_GPIO MFP_CFG(GPIO8, AF0)
-#define GPIO9_GPIO MFP_CFG(GPIO9, AF0)
-#define GPIO10_GPIO MFP_CFG(GPIO10, AF0)
-#define GPIO11_GPIO MFP_CFG(GPIO11, AF0)
-#define GPIO12_GPIO MFP_CFG(GPIO12, AF0)
-#define GPIO13_GPIO MFP_CFG(GPIO13, AF0)
-#define GPIO14_GPIO MFP_CFG(GPIO14, AF0)
-#define GPIO15_GPIO MFP_CFG(GPIO15, AF0)
-#define GPIO16_GPIO MFP_CFG(GPIO16, AF0)
-#define GPIO17_GPIO MFP_CFG(GPIO17, AF0)
-#define GPIO18_GPIO MFP_CFG(GPIO18, AF0)
-#define GPIO19_GPIO MFP_CFG(GPIO19, AF0)
-#define GPIO20_GPIO MFP_CFG(GPIO20, AF0)
-#define GPIO21_GPIO MFP_CFG(GPIO21, AF0)
-#define GPIO22_GPIO MFP_CFG(GPIO22, AF0)
-#define GPIO23_GPIO MFP_CFG(GPIO23, AF0)
-#define GPIO24_GPIO MFP_CFG(GPIO24, AF0)
-#define GPIO25_GPIO MFP_CFG(GPIO25, AF0)
-#define GPIO26_GPIO MFP_CFG(GPIO26, AF0)
-#define GPIO27_GPIO MFP_CFG(GPIO27, AF0)
-#define GPIO28_GPIO MFP_CFG(GPIO28, AF0)
-#define GPIO29_GPIO MFP_CFG(GPIO29, AF0)
-#define GPIO30_GPIO MFP_CFG(GPIO30, AF0)
-#define GPIO31_GPIO MFP_CFG(GPIO31, AF0)
-#define GPIO32_GPIO MFP_CFG(GPIO32, AF0)
-#define GPIO33_GPIO MFP_CFG(GPIO33, AF0)
-#define GPIO34_GPIO MFP_CFG(GPIO34, AF0)
-#define GPIO35_GPIO MFP_CFG(GPIO35, AF0)
-#define GPIO36_GPIO MFP_CFG(GPIO36, AF0)
-#define GPIO37_GPIO MFP_CFG(GPIO37, AF0)
-#define GPIO38_GPIO MFP_CFG(GPIO38, AF0)
-#define GPIO39_GPIO MFP_CFG(GPIO39, AF0)
-#define GPIO40_GPIO MFP_CFG(GPIO40, AF0)
-#define GPIO41_GPIO MFP_CFG(GPIO41, AF0)
-#define GPIO42_GPIO MFP_CFG(GPIO42, AF0)
-#define GPIO43_GPIO MFP_CFG(GPIO43, AF0)
-#define GPIO44_GPIO MFP_CFG(GPIO44, AF0)
-#define GPIO45_GPIO MFP_CFG(GPIO45, AF0)
-#define GPIO46_GPIO MFP_CFG(GPIO46, AF0)
-#define GPIO47_GPIO MFP_CFG(GPIO47, AF0)
-#define GPIO48_GPIO MFP_CFG(GPIO48, AF0)
-#define GPIO49_GPIO MFP_CFG(GPIO49, AF0)
-#define GPIO50_GPIO MFP_CFG(GPIO50, AF0)
-#define GPIO51_GPIO MFP_CFG(GPIO51, AF0)
-#define GPIO52_GPIO MFP_CFG(GPIO52, AF0)
-#define GPIO53_GPIO MFP_CFG(GPIO53, AF0)
-#define GPIO54_GPIO MFP_CFG(GPIO54, AF0)
-#define GPIO55_GPIO MFP_CFG(GPIO55, AF0)
-#define GPIO56_GPIO MFP_CFG(GPIO56, AF0)
-#define GPIO57_GPIO MFP_CFG(GPIO57, AF0)
-#define GPIO58_GPIO MFP_CFG(GPIO58, AF0)
-#define GPIO59_GPIO MFP_CFG(GPIO59, AF0)
-#define GPIO60_GPIO MFP_CFG(GPIO60, AF0)
-#define GPIO61_GPIO MFP_CFG(GPIO61, AF0)
-#define GPIO62_GPIO MFP_CFG(GPIO62, AF0)
-#define GPIO63_GPIO MFP_CFG(GPIO63, AF0)
-#define GPIO64_GPIO MFP_CFG(GPIO64, AF0)
-#define GPIO65_GPIO MFP_CFG(GPIO65, AF0)
-#define GPIO66_GPIO MFP_CFG(GPIO66, AF0)
-#define GPIO67_GPIO MFP_CFG(GPIO67, AF0)
-#define GPIO68_GPIO MFP_CFG(GPIO68, AF0)
-#define GPIO69_GPIO MFP_CFG(GPIO69, AF0)
-#define GPIO70_GPIO MFP_CFG(GPIO70, AF0)
-#define GPIO71_GPIO MFP_CFG(GPIO71, AF0)
-#define GPIO72_GPIO MFP_CFG(GPIO72, AF0)
-#define GPIO73_GPIO MFP_CFG(GPIO73, AF0)
-#define GPIO74_GPIO MFP_CFG(GPIO74, AF0)
-#define GPIO75_GPIO MFP_CFG(GPIO75, AF0)
-#define GPIO76_GPIO MFP_CFG(GPIO76, AF0)
-#define GPIO77_GPIO MFP_CFG(GPIO77, AF0)
-#define GPIO78_GPIO MFP_CFG(GPIO78, AF0)
-#define GPIO79_GPIO MFP_CFG(GPIO79, AF0)
-#define GPIO80_GPIO MFP_CFG(GPIO80, AF0)
-#define GPIO81_GPIO MFP_CFG(GPIO81, AF0)
-#define GPIO82_GPIO MFP_CFG(GPIO82, AF0)
-#define GPIO83_GPIO MFP_CFG(GPIO83, AF0)
-#define GPIO84_GPIO MFP_CFG(GPIO84, AF0)
-#define GPIO85_GPIO MFP_CFG(GPIO85, AF0)
-#define GPIO86_GPIO MFP_CFG(GPIO86, AF0)
-#define GPIO87_GPIO MFP_CFG(GPIO87, AF0)
-#define GPIO88_GPIO MFP_CFG(GPIO88, AF0)
-#define GPIO89_GPIO MFP_CFG(GPIO89, AF0)
-#define GPIO90_GPIO MFP_CFG(GPIO90, AF0)
-#define GPIO91_GPIO MFP_CFG(GPIO91, AF0)
-#define GPIO92_GPIO MFP_CFG(GPIO92, AF0)
-#define GPIO93_GPIO MFP_CFG(GPIO93, AF0)
-#define GPIO94_GPIO MFP_CFG(GPIO94, AF0)
-#define GPIO95_GPIO MFP_CFG(GPIO95, AF0)
-#define GPIO96_GPIO MFP_CFG(GPIO96, AF0)
-#define GPIO97_GPIO MFP_CFG(GPIO97, AF0)
-#define GPIO98_GPIO MFP_CFG(GPIO98, AF0)
-#define GPIO99_GPIO MFP_CFG(GPIO99, AF0)
-#define GPIO100_GPIO MFP_CFG(GPIO100, AF0)
-#define GPIO101_GPIO MFP_CFG(GPIO101, AF0)
-#define GPIO102_GPIO MFP_CFG(GPIO102, AF1)
-#define GPIO103_GPIO MFP_CFG(GPIO103, AF1)
-#define GPIO104_GPIO MFP_CFG(GPIO104, AF1)
-#define GPIO105_GPIO MFP_CFG(GPIO105, AF1)
-#define GPIO106_GPIO MFP_CFG(GPIO106, AF1)
-#define GPIO107_GPIO MFP_CFG(GPIO107, AF1)
-#define GPIO108_GPIO MFP_CFG(GPIO108, AF1)
-#define GPIO109_GPIO MFP_CFG(GPIO109, AF1)
-#define GPIO110_GPIO MFP_CFG(GPIO110, AF1)
-#define GPIO111_GPIO MFP_CFG(GPIO111, AF1)
-#define GPIO112_GPIO MFP_CFG(GPIO112, AF1)
-#define GPIO113_GPIO MFP_CFG(GPIO113, AF1)
-#define GPIO114_GPIO MFP_CFG(GPIO114, AF0)
-#define GPIO115_GPIO MFP_CFG(GPIO115, AF0)
-#define GPIO116_GPIO MFP_CFG(GPIO116, AF0)
-#define GPIO117_GPIO MFP_CFG(GPIO117, AF0)
-#define GPIO118_GPIO MFP_CFG(GPIO118, AF0)
-#define GPIO119_GPIO MFP_CFG(GPIO119, AF0)
-#define GPIO120_GPIO MFP_CFG(GPIO120, AF0)
-#define GPIO121_GPIO MFP_CFG(GPIO121, AF0)
-#define GPIO122_GPIO MFP_CFG(GPIO122, AF0)
-#define GPIO123_GPIO MFP_CFG(GPIO123, AF0)
-#define GPIO124_GPIO MFP_CFG(GPIO124, AF0)
-#define GPIO125_GPIO MFP_CFG(GPIO125, AF0)
-#define GPIO126_GPIO MFP_CFG(GPIO126, AF0)
-#define GPIO127_GPIO MFP_CFG(GPIO127, AF0)
-#define GPIO128_GPIO MFP_CFG(GPIO128, AF0)
-#define GPIO129_GPIO MFP_CFG(GPIO129, AF0)
-#define GPIO130_GPIO MFP_CFG(GPIO130, AF0)
-#define GPIO131_GPIO MFP_CFG(GPIO131, AF0)
-#define GPIO132_GPIO MFP_CFG(GPIO132, AF0)
-#define GPIO133_GPIO MFP_CFG(GPIO133, AF0)
-#define GPIO134_GPIO MFP_CFG(GPIO134, AF0)
-#define GPIO135_GPIO MFP_CFG(GPIO135, AF0)
-#define GPIO136_GPIO MFP_CFG(GPIO136, AF0)
-#define GPIO137_GPIO MFP_CFG(GPIO137, AF0)
-#define GPIO138_GPIO MFP_CFG(GPIO138, AF0)
-#define GPIO139_GPIO MFP_CFG(GPIO139, AF0)
-#define GPIO140_GPIO MFP_CFG(GPIO140, AF0)
-#define GPIO141_GPIO MFP_CFG(GPIO141, AF0)
-#define GPIO142_GPIO MFP_CFG(GPIO142, AF1)
-#define GPIO143_GPIO MFP_CFG(GPIO143, AF1)
-#define GPIO144_GPIO MFP_CFG(GPIO144, AF1)
-#define GPIO145_GPIO MFP_CFG(GPIO145, AF1)
-#define GPIO146_GPIO MFP_CFG(GPIO146, AF1)
-#define GPIO147_GPIO MFP_CFG(GPIO147, AF1)
-#define GPIO148_GPIO MFP_CFG(GPIO148, AF1)
-#define GPIO149_GPIO MFP_CFG(GPIO149, AF1)
-#define GPIO150_GPIO MFP_CFG(GPIO150, AF1)
-#define GPIO151_GPIO MFP_CFG(GPIO151, AF1)
-#define GPIO152_GPIO MFP_CFG(GPIO152, AF1)
-#define GPIO153_GPIO MFP_CFG(GPIO153, AF1)
-#define GPIO154_GPIO MFP_CFG(GPIO154, AF1)
-#define GPIO155_GPIO MFP_CFG(GPIO155, AF1)
-#define GPIO156_GPIO MFP_CFG(GPIO156, AF1)
-#define GPIO157_GPIO MFP_CFG(GPIO157, AF1)
-#define GPIO158_GPIO MFP_CFG(GPIO158, AF1)
-#define GPIO159_GPIO MFP_CFG(GPIO159, AF1)
-#define GPIO160_GPIO MFP_CFG(GPIO160, AF1)
-#define GPIO161_GPIO MFP_CFG(GPIO161, AF1)
-#define GPIO162_GPIO MFP_CFG(GPIO162, AF1)
-#define GPIO163_GPIO MFP_CFG(GPIO163, AF1)
-#define GPIO164_GPIO MFP_CFG(GPIO164, AF1)
-#define GPIO165_GPIO MFP_CFG(GPIO165, AF1)
-#define GPIO166_GPIO MFP_CFG(GPIO166, AF1)
-#define GPIO167_GPIO MFP_CFG(GPIO167, AF1)
-#define GPIO168_GPIO MFP_CFG(GPIO168, AF1)
-
-/* DFI */
-#define GPIO108_DFI_D15 MFP_CFG(GPIO108, AF0)
-#define GPIO109_DFI_D14 MFP_CFG(GPIO109, AF0)
-#define GPIO110_DFI_D13 MFP_CFG(GPIO110, AF0)
-#define GPIO161_DFI_D12 MFP_CFG(GPIO161, AF0)
-#define GPIO162_DFI_D11 MFP_CFG(GPIO162, AF0)
-#define GPIO163_DFI_D10 MFP_CFG(GPIO163, AF0)
-#define GPIO164_DFI_D9 MFP_CFG(GPIO164, AF0)
-#define GPIO111_DFI_D8 MFP_CFG(GPIO111, AF0)
-#define GPIO104_DFI_D7 MFP_CFG(GPIO104, AF0)
-#define GPIO105_DFI_D6 MFP_CFG(GPIO105, AF0)
-#define GPIO106_DFI_D5 MFP_CFG(GPIO106, AF0)
-#define GPIO107_DFI_D4 MFP_CFG(GPIO107, AF0)
-#define GPIO165_DFI_D3 MFP_CFG(GPIO165, AF0)
-#define GPIO166_DFI_D2 MFP_CFG(GPIO166, AF0)
-#define GPIO167_DFI_D1 MFP_CFG(GPIO167, AF0)
-#define GPIO168_DFI_D0 MFP_CFG(GPIO168, AF0)
-#define GPIO143_ND_nCS0 MFP_CFG(GPIO143, AF0)
-#define GPIO144_ND_nCS1 MFP_CFG(GPIO144, AF0)
-#define GPIO147_ND_nWE MFP_CFG(GPIO147, AF0)
-#define GPIO148_ND_nRE MFP_CFG(GPIO148, AF0)
-#define GPIO150_ND_ALE MFP_CFG(GPIO150, AF0)
-#define GPIO149_ND_CLE MFP_CFG(GPIO149, AF0)
-#define GPIO112_ND_RDY0 MFP_CFG(GPIO112, AF0)
-#define GPIO160_ND_RDY1 MFP_CFG(GPIO160, AF0)
-
-/* Static Memory Controller */
-#define GPIO145_SMC_nCS0 MFP_CFG(GPIO145, AF0)
-#define GPIO146_SMC_nCS1 MFP_CFG(GPIO146, AF0)
-#define GPIO152_SMC_BE0 MFP_CFG(GPIO152, AF0)
-#define GPIO153_SMC_BE1 MFP_CFG(GPIO153, AF0)
-#define GPIO154_SMC_IRQ MFP_CFG(GPIO154, AF0)
-#define GPIO113_SMC_RDY MFP_CFG(GPIO113, AF0)
-#define GPIO151_SMC_SCLK MFP_CFG(GPIO151, AF0)
-
-/* Ethernet */
-#define GPIO155_SM_ADVMUX MFP_CFG(GPIO155, AF2)
-
-/* UART1 */
-#define GPIO45_UART1_RXD MFP_CFG(GPIO45, AF1)
-#define GPIO46_UART1_TXD MFP_CFG(GPIO46, AF1)
-#define GPIO29_UART1_RXD MFP_CFG(GPIO29, AF1)
-#define GPIO30_UART1_TXD MFP_CFG(GPIO30, AF1)
-#define GPIO31_UART1_CTS MFP_CFG(GPIO31, AF1)
-#define GPIO32_UART1_RTS MFP_CFG(GPIO32, AF1)
-
-/* UART2 */
-#define GPIO47_UART2_RXD MFP_CFG(GPIO47, AF1)
-#define GPIO48_UART2_TXD MFP_CFG(GPIO48, AF1)
-#define GPIO49_UART2_CTS MFP_CFG(GPIO49, AF1)
-#define GPIO50_UART2_RTS MFP_CFG(GPIO50, AF1)
-
-/* UART3 */
-#define GPIO51_UART3_RXD MFP_CFG(GPIO51, AF1)
-#define GPIO52_UART3_TXD MFP_CFG(GPIO52, AF1)
-#define GPIO53_UART3_CTS MFP_CFG(GPIO53, AF1)
-#define GPIO54_UART3_RTS MFP_CFG(GPIO54, AF1)
-
-/* MMC1 */
-#define GPIO124_MMC1_DAT7 MFP_CFG_DRV(GPIO124, AF1, FAST)
-#define GPIO125_MMC1_DAT6 MFP_CFG_DRV(GPIO125, AF1, FAST)
-#define GPIO129_MMC1_DAT5 MFP_CFG_DRV(GPIO129, AF1, FAST)
-#define GPIO130_MMC1_DAT4 MFP_CFG_DRV(GPIO130, AF1, FAST)
-#define GPIO131_MMC1_DAT3 MFP_CFG_DRV(GPIO131, AF1, FAST)
-#define GPIO132_MMC1_DAT2 MFP_CFG_DRV(GPIO132, AF1, FAST)
-#define GPIO133_MMC1_DAT1 MFP_CFG_DRV(GPIO133, AF1, FAST)
-#define GPIO134_MMC1_DAT0 MFP_CFG_DRV(GPIO134, AF1, FAST)
-#define GPIO136_MMC1_CMD MFP_CFG_DRV(GPIO136, AF1, FAST)
-#define GPIO139_MMC1_CLK MFP_CFG_DRV(GPIO139, AF1, FAST)
-#define GPIO140_MMC1_CD MFP_CFG_DRV(GPIO140, AF1, FAST)
-#define GPIO141_MMC1_WP MFP_CFG_DRV(GPIO141, AF1, FAST)
-
-/*MMC2*/
-#define GPIO37_MMC2_DAT3 MFP_CFG_DRV(GPIO37, AF1, FAST)
-#define GPIO38_MMC2_DAT2 MFP_CFG_DRV(GPIO38, AF1, FAST)
-#define GPIO39_MMC2_DAT1 MFP_CFG_DRV(GPIO39, AF1, FAST)
-#define GPIO40_MMC2_DAT0 MFP_CFG_DRV(GPIO40, AF1, FAST)
-#define GPIO41_MMC2_CMD MFP_CFG_DRV(GPIO41, AF1, FAST)
-#define GPIO42_MMC2_CLK MFP_CFG_DRV(GPIO42, AF1, FAST)
-
-/*MMC3*/
-#define GPIO165_MMC3_DAT7 MFP_CFG_DRV(GPIO165, AF2, FAST)
-#define GPIO162_MMC3_DAT6 MFP_CFG_DRV(GPIO162, AF2, FAST)
-#define GPIO166_MMC3_DAT5 MFP_CFG_DRV(GPIO166, AF2, FAST)
-#define GPIO163_MMC3_DAT4 MFP_CFG_DRV(GPIO163, AF2, FAST)
-#define GPIO167_MMC3_DAT3 MFP_CFG_DRV(GPIO167, AF2, FAST)
-#define GPIO164_MMC3_DAT2 MFP_CFG_DRV(GPIO164, AF2, FAST)
-#define GPIO168_MMC3_DAT1 MFP_CFG_DRV(GPIO168, AF2, FAST)
-#define GPIO111_MMC3_DAT0 MFP_CFG_DRV(GPIO111, AF2, FAST)
-#define GPIO112_MMC3_CMD MFP_CFG_DRV(GPIO112, AF2, FAST)
-#define GPIO151_MMC3_CLK MFP_CFG_DRV(GPIO151, AF2, FAST)
-
-/* LCD */
-#define GPIO74_LCD_FCLK MFP_CFG_DRV(GPIO74, AF1, FAST)
-#define GPIO75_LCD_LCLK MFP_CFG_DRV(GPIO75, AF1, FAST)
-#define GPIO76_LCD_PCLK MFP_CFG_DRV(GPIO76, AF1, FAST)
-#define GPIO77_LCD_DENA MFP_CFG_DRV(GPIO77, AF1, FAST)
-#define GPIO78_LCD_DD0 MFP_CFG_DRV(GPIO78, AF1, FAST)
-#define GPIO79_LCD_DD1 MFP_CFG_DRV(GPIO79, AF1, FAST)
-#define GPIO80_LCD_DD2 MFP_CFG_DRV(GPIO80, AF1, FAST)
-#define GPIO81_LCD_DD3 MFP_CFG_DRV(GPIO81, AF1, FAST)
-#define GPIO82_LCD_DD4 MFP_CFG_DRV(GPIO82, AF1, FAST)
-#define GPIO83_LCD_DD5 MFP_CFG_DRV(GPIO83, AF1, FAST)
-#define GPIO84_LCD_DD6 MFP_CFG_DRV(GPIO84, AF1, FAST)
-#define GPIO85_LCD_DD7 MFP_CFG_DRV(GPIO85, AF1, FAST)
-#define GPIO86_LCD_DD8 MFP_CFG_DRV(GPIO86, AF1, FAST)
-#define GPIO87_LCD_DD9 MFP_CFG_DRV(GPIO87, AF1, FAST)
-#define GPIO88_LCD_DD10 MFP_CFG_DRV(GPIO88, AF1, FAST)
-#define GPIO89_LCD_DD11 MFP_CFG_DRV(GPIO89, AF1, FAST)
-#define GPIO90_LCD_DD12 MFP_CFG_DRV(GPIO90, AF1, FAST)
-#define GPIO91_LCD_DD13 MFP_CFG_DRV(GPIO91, AF1, FAST)
-#define GPIO92_LCD_DD14 MFP_CFG_DRV(GPIO92, AF1, FAST)
-#define GPIO93_LCD_DD15 MFP_CFG_DRV(GPIO93, AF1, FAST)
-#define GPIO94_LCD_DD16 MFP_CFG_DRV(GPIO94, AF1, FAST)
-#define GPIO95_LCD_DD17 MFP_CFG_DRV(GPIO95, AF1, FAST)
-#define GPIO96_LCD_DD18 MFP_CFG_DRV(GPIO96, AF1, FAST)
-#define GPIO97_LCD_DD19 MFP_CFG_DRV(GPIO97, AF1, FAST)
-#define GPIO98_LCD_DD20 MFP_CFG_DRV(GPIO98, AF1, FAST)
-#define GPIO99_LCD_DD21 MFP_CFG_DRV(GPIO99, AF1, FAST)
-#define GPIO100_LCD_DD22 MFP_CFG_DRV(GPIO100, AF1, FAST)
-#define GPIO101_LCD_DD23 MFP_CFG_DRV(GPIO101, AF1, FAST)
-#define GPIO94_SPI_DCLK MFP_CFG_DRV(GPIO94, AF3, FAST)
-#define GPIO95_SPI_CS0 MFP_CFG_DRV(GPIO95, AF3, FAST)
-#define GPIO96_SPI_DIN MFP_CFG_DRV(GPIO96, AF3, FAST)
-#define GPIO97_SPI_DOUT MFP_CFG_DRV(GPIO97, AF3, FAST)
-#define GPIO98_LCD_RST MFP_CFG_DRV(GPIO98, AF0, FAST)
-
-#define GPIO114_MN_CLK_OUT MFP_CFG_DRV(GPIO114, AF1, FAST)
-
-/*LCD TV path*/
-#define GPIO124_LCD_DD24 MFP_CFG_DRV(GPIO124, AF2, FAST)
-#define GPIO125_LCD_DD25 MFP_CFG_DRV(GPIO125, AF2, FAST)
-#define GPIO126_LCD_DD33 MFP_CFG_DRV(GPIO126, AF2, FAST)
-#define GPIO127_LCD_DD26 MFP_CFG_DRV(GPIO127, AF2, FAST)
-#define GPIO128_LCD_DD27 MFP_CFG_DRV(GPIO128, AF2, FAST)
-#define GPIO129_LCD_DD28 MFP_CFG_DRV(GPIO129, AF2, FAST)
-#define GPIO130_LCD_DD29 MFP_CFG_DRV(GPIO130, AF2, FAST)
-#define GPIO135_LCD_DD30 MFP_CFG_DRV(GPIO135, AF2, FAST)
-#define GPIO137_LCD_DD31 MFP_CFG_DRV(GPIO137, AF2, FAST)
-#define GPIO138_LCD_DD32 MFP_CFG_DRV(GPIO138, AF2, FAST)
-#define GPIO140_LCD_DD34 MFP_CFG_DRV(GPIO140, AF2, FAST)
-#define GPIO141_LCD_DD35 MFP_CFG_DRV(GPIO141, AF2, FAST)
-
-/* I2C */
-#define GPIO43_TWSI2_SCL MFP_CFG_DRV(GPIO43, AF1, SLOW)
-#define GPIO44_TWSI2_SDA MFP_CFG_DRV(GPIO44, AF1, SLOW)
-#define GPIO71_TWSI3_SCL MFP_CFG_DRV(GPIO71, AF1, SLOW)
-#define GPIO72_TWSI3_SDA MFP_CFG_DRV(GPIO72, AF1, SLOW)
-#define TWSI4_SCL MFP_CFG_DRV(TWSI4_SCL, AF0, SLOW)
-#define TWSI4_SDA MFP_CFG_DRV(TWSI4_SDA, AF0, SLOW)
-#define GPIO99_TWSI5_SCL MFP_CFG_DRV(GPIO99, AF4, SLOW)
-#define GPIO100_TWSI5_SDA MFP_CFG_DRV(GPIO100, AF4, SLOW)
-#define GPIO97_TWSI6_SCL MFP_CFG_DRV(GPIO97, AF2, SLOW)
-#define GPIO98_TWSI6_SDA MFP_CFG_DRV(GPIO98, AF2, SLOW)
-
-/* SSPA1 */
-#define GPIO24_I2S_SYSCLK MFP_CFG(GPIO24, AF1)
-#define GPIO25_I2S_BITCLK MFP_CFG(GPIO25, AF1)
-#define GPIO26_I2S_SYNC MFP_CFG(GPIO26, AF1)
-#define GPIO27_I2S_DATA_OUT MFP_CFG(GPIO27, AF1)
-#define GPIO28_I2S_SDATA_IN MFP_CFG(GPIO28, AF1)
-#define GPIO114_I2S_MCLK MFP_CFG(GPIO114, AF1)
-
-/* SSPA2 */
-#define GPIO33_SSPA2_CLK MFP_CFG(GPIO33, AF1)
-#define GPIO34_SSPA2_FRM MFP_CFG(GPIO34, AF1)
-#define GPIO35_SSPA2_TXD MFP_CFG(GPIO35, AF1)
-#define GPIO36_SSPA2_RXD MFP_CFG(GPIO36, AF1)
-
-/* Keypad */
-#define GPIO00_KP_MKIN0 MFP_CFG(GPIO0, AF1)
-#define GPIO01_KP_MKOUT0 MFP_CFG(GPIO1, AF1)
-#define GPIO02_KP_MKIN1 MFP_CFG(GPIO2, AF1)
-#define GPIO03_KP_MKOUT1 MFP_CFG(GPIO3, AF1)
-#define GPIO04_KP_MKIN2 MFP_CFG(GPIO4, AF1)
-#define GPIO05_KP_MKOUT2 MFP_CFG(GPIO5, AF1)
-#define GPIO06_KP_MKIN3 MFP_CFG(GPIO6, AF1)
-#define GPIO07_KP_MKOUT3 MFP_CFG(GPIO7, AF1)
-#define GPIO08_KP_MKIN4 MFP_CFG(GPIO8, AF1)
-#define GPIO09_KP_MKOUT4 MFP_CFG(GPIO9, AF1)
-#define GPIO10_KP_MKIN5 MFP_CFG(GPIO10, AF1)
-#define GPIO11_KP_MKOUT5 MFP_CFG(GPIO11, AF1)
-#define GPIO12_KP_MKIN6 MFP_CFG(GPIO12, AF1)
-#define GPIO13_KP_MKOUT6 MFP_CFG(GPIO13, AF1)
-#define GPIO14_KP_MKIN7 MFP_CFG(GPIO14, AF1)
-#define GPIO15_KP_MKOUT7 MFP_CFG(GPIO15, AF1)
-#define GPIO16_KP_DKIN0 MFP_CFG(GPIO16, AF1)
-#define GPIO17_KP_DKIN1 MFP_CFG(GPIO17, AF1)
-#define GPIO18_KP_DKIN2 MFP_CFG(GPIO18, AF1)
-#define GPIO19_KP_DKIN3 MFP_CFG(GPIO19, AF1)
-#define GPIO20_KP_DKIN4 MFP_CFG(GPIO20, AF1)
-#define GPIO21_KP_DKIN5 MFP_CFG(GPIO21, AF1)
-#define GPIO22_KP_DKIN6 MFP_CFG(GPIO22, AF1)
-#define GPIO23_KP_DKIN7 MFP_CFG(GPIO23, AF1)
-
-/* CAMERA */
-#define GPIO59_CCIC_IN7 MFP_CFG_DRV(GPIO59, AF1, FAST)
-#define GPIO60_CCIC_IN6 MFP_CFG_DRV(GPIO60, AF1, FAST)
-#define GPIO61_CCIC_IN5 MFP_CFG_DRV(GPIO61, AF1, FAST)
-#define GPIO62_CCIC_IN4 MFP_CFG_DRV(GPIO62, AF1, FAST)
-#define GPIO63_CCIC_IN3 MFP_CFG_DRV(GPIO63, AF1, FAST)
-#define GPIO64_CCIC_IN2 MFP_CFG_DRV(GPIO64, AF1, FAST)
-#define GPIO65_CCIC_IN1 MFP_CFG_DRV(GPIO65, AF1, FAST)
-#define GPIO66_CCIC_IN0 MFP_CFG_DRV(GPIO66, AF1, FAST)
-#define GPIO67_CAM_HSYNC MFP_CFG_DRV(GPIO67, AF1, FAST)
-#define GPIO68_CAM_VSYNC MFP_CFG_DRV(GPIO68, AF1, FAST)
-#define GPIO69_CAM_MCLK MFP_CFG_DRV(GPIO69, AF1, FAST)
-#define GPIO70_CAM_PCLK MFP_CFG_DRV(GPIO70, AF1, FAST)
-
-/* PMIC */
-#define PMIC_PMIC_INT MFP_CFG(PMIC_INT, AF0)
-
-#endif /* __ASM_MACH_MFP_MMP2_H */
-
diff --git a/arch/arm/mach-mmp/mfp-pxa168.h b/arch/arm/mach-mmp/mfp-pxa168.h
deleted file mode 100644
index 90d16d3419a4..000000000000
--- a/arch/arm/mach-mmp/mfp-pxa168.h
+++ /dev/null
@@ -1,355 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_MACH_MFP_PXA168_H
-#define __ASM_MACH_MFP_PXA168_H
-
-#include "mfp.h"
-
-#define MFP_DRIVE_VERY_SLOW (0x0 << 13)
-#define MFP_DRIVE_SLOW (0x1 << 13)
-#define MFP_DRIVE_MEDIUM (0x2 << 13)
-#define MFP_DRIVE_FAST (0x3 << 13)
-
-#undef MFP_CFG
-#undef MFP_CFG_DRV
-
-#define MFP_CFG(pin, af) \
- (MFP_LPM_INPUT | MFP_PIN(MFP_PIN_##pin) | MFP_##af | MFP_DRIVE_MEDIUM)
-
-#define MFP_CFG_DRV(pin, af, drv) \
- (MFP_LPM_INPUT | MFP_PIN(MFP_PIN_##pin) | MFP_##af | MFP_DRIVE_##drv)
-
-/* GPIO */
-#define GPIO0_GPIO MFP_CFG(GPIO0, AF5)
-#define GPIO1_GPIO MFP_CFG(GPIO1, AF5)
-#define GPIO2_GPIO MFP_CFG(GPIO2, AF5)
-#define GPIO3_GPIO MFP_CFG(GPIO3, AF5)
-#define GPIO4_GPIO MFP_CFG(GPIO4, AF5)
-#define GPIO5_GPIO MFP_CFG(GPIO5, AF5)
-#define GPIO6_GPIO MFP_CFG(GPIO6, AF5)
-#define GPIO7_GPIO MFP_CFG(GPIO7, AF5)
-#define GPIO8_GPIO MFP_CFG(GPIO8, AF5)
-#define GPIO9_GPIO MFP_CFG(GPIO9, AF5)
-#define GPIO10_GPIO MFP_CFG(GPIO10, AF5)
-#define GPIO11_GPIO MFP_CFG(GPIO11, AF5)
-#define GPIO12_GPIO MFP_CFG(GPIO12, AF5)
-#define GPIO13_GPIO MFP_CFG(GPIO13, AF5)
-#define GPIO14_GPIO MFP_CFG(GPIO14, AF5)
-#define GPIO15_GPIO MFP_CFG(GPIO15, AF5)
-#define GPIO16_GPIO MFP_CFG(GPIO16, AF0)
-#define GPIO17_GPIO MFP_CFG(GPIO17, AF5)
-#define GPIO18_GPIO MFP_CFG(GPIO18, AF0)
-#define GPIO19_GPIO MFP_CFG(GPIO19, AF5)
-#define GPIO20_GPIO MFP_CFG(GPIO20, AF0)
-#define GPIO21_GPIO MFP_CFG(GPIO21, AF5)
-#define GPIO22_GPIO MFP_CFG(GPIO22, AF5)
-#define GPIO23_GPIO MFP_CFG(GPIO23, AF5)
-#define GPIO24_GPIO MFP_CFG(GPIO24, AF5)
-#define GPIO25_GPIO MFP_CFG(GPIO25, AF5)
-#define GPIO26_GPIO MFP_CFG(GPIO26, AF0)
-#define GPIO27_GPIO MFP_CFG(GPIO27, AF5)
-#define GPIO28_GPIO MFP_CFG(GPIO28, AF5)
-#define GPIO29_GPIO MFP_CFG(GPIO29, AF5)
-#define GPIO30_GPIO MFP_CFG(GPIO30, AF5)
-#define GPIO31_GPIO MFP_CFG(GPIO31, AF5)
-#define GPIO32_GPIO MFP_CFG(GPIO32, AF5)
-#define GPIO33_GPIO MFP_CFG(GPIO33, AF5)
-#define GPIO34_GPIO MFP_CFG(GPIO34, AF0)
-#define GPIO35_GPIO MFP_CFG(GPIO35, AF0)
-#define GPIO36_GPIO MFP_CFG(GPIO36, AF0)
-#define GPIO37_GPIO MFP_CFG(GPIO37, AF0)
-#define GPIO38_GPIO MFP_CFG(GPIO38, AF0)
-#define GPIO39_GPIO MFP_CFG(GPIO39, AF0)
-#define GPIO40_GPIO MFP_CFG(GPIO40, AF0)
-#define GPIO41_GPIO MFP_CFG(GPIO41, AF0)
-#define GPIO42_GPIO MFP_CFG(GPIO42, AF0)
-#define GPIO43_GPIO MFP_CFG(GPIO43, AF0)
-#define GPIO44_GPIO MFP_CFG(GPIO44, AF0)
-#define GPIO45_GPIO MFP_CFG(GPIO45, AF0)
-#define GPIO46_GPIO MFP_CFG(GPIO46, AF0)
-#define GPIO47_GPIO MFP_CFG(GPIO47, AF0)
-#define GPIO48_GPIO MFP_CFG(GPIO48, AF0)
-#define GPIO49_GPIO MFP_CFG(GPIO49, AF0)
-#define GPIO50_GPIO MFP_CFG(GPIO50, AF0)
-#define GPIO51_GPIO MFP_CFG(GPIO51, AF0)
-#define GPIO52_GPIO MFP_CFG(GPIO52, AF0)
-#define GPIO53_GPIO MFP_CFG(GPIO53, AF0)
-#define GPIO54_GPIO MFP_CFG(GPIO54, AF0)
-#define GPIO55_GPIO MFP_CFG(GPIO55, AF0)
-#define GPIO56_GPIO MFP_CFG(GPIO56, AF0)
-#define GPIO57_GPIO MFP_CFG(GPIO57, AF0)
-#define GPIO58_GPIO MFP_CFG(GPIO58, AF0)
-#define GPIO59_GPIO MFP_CFG(GPIO59, AF0)
-#define GPIO60_GPIO MFP_CFG(GPIO60, AF0)
-#define GPIO61_GPIO MFP_CFG(GPIO61, AF0)
-#define GPIO62_GPIO MFP_CFG(GPIO62, AF0)
-#define GPIO63_GPIO MFP_CFG(GPIO63, AF0)
-#define GPIO64_GPIO MFP_CFG(GPIO64, AF0)
-#define GPIO65_GPIO MFP_CFG(GPIO65, AF0)
-#define GPIO66_GPIO MFP_CFG(GPIO66, AF0)
-#define GPIO67_GPIO MFP_CFG(GPIO67, AF0)
-#define GPIO68_GPIO MFP_CFG(GPIO68, AF0)
-#define GPIO69_GPIO MFP_CFG(GPIO69, AF0)
-#define GPIO70_GPIO MFP_CFG(GPIO70, AF0)
-#define GPIO71_GPIO MFP_CFG(GPIO71, AF0)
-#define GPIO72_GPIO MFP_CFG(GPIO72, AF0)
-#define GPIO73_GPIO MFP_CFG(GPIO73, AF0)
-#define GPIO74_GPIO MFP_CFG(GPIO74, AF0)
-#define GPIO75_GPIO MFP_CFG(GPIO75, AF0)
-#define GPIO76_GPIO MFP_CFG(GPIO76, AF0)
-#define GPIO77_GPIO MFP_CFG(GPIO77, AF0)
-#define GPIO78_GPIO MFP_CFG(GPIO78, AF0)
-#define GPIO79_GPIO MFP_CFG(GPIO79, AF0)
-#define GPIO80_GPIO MFP_CFG(GPIO80, AF0)
-#define GPIO81_GPIO MFP_CFG(GPIO81, AF0)
-#define GPIO82_GPIO MFP_CFG(GPIO82, AF0)
-#define GPIO83_GPIO MFP_CFG(GPIO83, AF0)
-#define GPIO84_GPIO MFP_CFG(GPIO84, AF0)
-#define GPIO85_GPIO MFP_CFG(GPIO85, AF0)
-#define GPIO86_GPIO MFP_CFG(GPIO86, AF0)
-#define GPIO87_GPIO MFP_CFG(GPIO87, AF0)
-#define GPIO88_GPIO MFP_CFG(GPIO88, AF0)
-#define GPIO89_GPIO MFP_CFG(GPIO89, AF0)
-#define GPIO90_GPIO MFP_CFG(GPIO90, AF0)
-#define GPIO91_GPIO MFP_CFG(GPIO91, AF0)
-#define GPIO92_GPIO MFP_CFG(GPIO92, AF0)
-#define GPIO93_GPIO MFP_CFG(GPIO93, AF0)
-#define GPIO94_GPIO MFP_CFG(GPIO94, AF0)
-#define GPIO95_GPIO MFP_CFG(GPIO95, AF0)
-#define GPIO96_GPIO MFP_CFG(GPIO96, AF0)
-#define GPIO97_GPIO MFP_CFG(GPIO97, AF0)
-#define GPIO98_GPIO MFP_CFG(GPIO98, AF0)
-#define GPIO99_GPIO MFP_CFG(GPIO99, AF0)
-#define GPIO100_GPIO MFP_CFG(GPIO100, AF0)
-#define GPIO101_GPIO MFP_CFG(GPIO101, AF0)
-#define GPIO102_GPIO MFP_CFG(GPIO102, AF0)
-#define GPIO103_GPIO MFP_CFG(GPIO103, AF0)
-#define GPIO104_GPIO MFP_CFG(GPIO104, AF0)
-#define GPIO105_GPIO MFP_CFG(GPIO105, AF0)
-#define GPIO106_GPIO MFP_CFG(GPIO106, AF0)
-#define GPIO107_GPIO MFP_CFG(GPIO107, AF0)
-#define GPIO108_GPIO MFP_CFG(GPIO108, AF0)
-#define GPIO109_GPIO MFP_CFG(GPIO109, AF0)
-#define GPIO110_GPIO MFP_CFG(GPIO110, AF0)
-#define GPIO111_GPIO MFP_CFG(GPIO111, AF0)
-#define GPIO112_GPIO MFP_CFG(GPIO112, AF0)
-#define GPIO113_GPIO MFP_CFG(GPIO113, AF0)
-#define GPIO114_GPIO MFP_CFG(GPIO114, AF0)
-#define GPIO115_GPIO MFP_CFG(GPIO115, AF0)
-#define GPIO116_GPIO MFP_CFG(GPIO116, AF0)
-#define GPIO117_GPIO MFP_CFG(GPIO117, AF0)
-#define GPIO118_GPIO MFP_CFG(GPIO118, AF0)
-#define GPIO119_GPIO MFP_CFG(GPIO119, AF0)
-#define GPIO120_GPIO MFP_CFG(GPIO120, AF0)
-#define GPIO121_GPIO MFP_CFG(GPIO121, AF0)
-#define GPIO122_GPIO MFP_CFG(GPIO122, AF0)
-
-/* DFI */
-#define GPIO0_DFI_D15 MFP_CFG(GPIO0, AF0)
-#define GPIO1_DFI_D14 MFP_CFG(GPIO1, AF0)
-#define GPIO2_DFI_D13 MFP_CFG(GPIO2, AF0)
-#define GPIO3_DFI_D12 MFP_CFG(GPIO3, AF0)
-#define GPIO4_DFI_D11 MFP_CFG(GPIO4, AF0)
-#define GPIO5_DFI_D10 MFP_CFG(GPIO5, AF0)
-#define GPIO6_DFI_D9 MFP_CFG(GPIO6, AF0)
-#define GPIO7_DFI_D8 MFP_CFG(GPIO7, AF0)
-#define GPIO8_DFI_D7 MFP_CFG(GPIO8, AF0)
-#define GPIO9_DFI_D6 MFP_CFG(GPIO9, AF0)
-#define GPIO10_DFI_D5 MFP_CFG(GPIO10, AF0)
-#define GPIO11_DFI_D4 MFP_CFG(GPIO11, AF0)
-#define GPIO12_DFI_D3 MFP_CFG(GPIO12, AF0)
-#define GPIO13_DFI_D2 MFP_CFG(GPIO13, AF0)
-#define GPIO14_DFI_D1 MFP_CFG(GPIO14, AF0)
-#define GPIO15_DFI_D0 MFP_CFG(GPIO15, AF0)
-
-#define GPIO30_DFI_ADDR0 MFP_CFG(GPIO30, AF0)
-#define GPIO31_DFI_ADDR1 MFP_CFG(GPIO31, AF0)
-#define GPIO32_DFI_ADDR2 MFP_CFG(GPIO32, AF0)
-#define GPIO33_DFI_ADDR3 MFP_CFG(GPIO33, AF0)
-
-/* NAND */
-#define GPIO16_ND_nCS0 MFP_CFG(GPIO16, AF1)
-#define GPIO17_ND_nWE MFP_CFG(GPIO17, AF0)
-#define GPIO21_ND_ALE MFP_CFG(GPIO21, AF0)
-#define GPIO22_ND_CLE MFP_CFG(GPIO22, AF0)
-#define GPIO24_ND_nRE MFP_CFG(GPIO24, AF0)
-#define GPIO26_ND_RnB1 MFP_CFG(GPIO26, AF1)
-#define GPIO27_ND_RnB2 MFP_CFG(GPIO27, AF1)
-
-/* Static Memory Controller */
-#define GPIO18_SMC_nCS0 MFP_CFG(GPIO18, AF3)
-#define GPIO18_SMC_nCS1 MFP_CFG(GPIO18, AF2)
-#define GPIO16_SMC_nCS0 MFP_CFG(GPIO16, AF2)
-#define GPIO16_SMC_nCS1 MFP_CFG(GPIO16, AF3)
-#define GPIO19_SMC_nCS0 MFP_CFG(GPIO19, AF0)
-#define GPIO20_SMC_nCS1 MFP_CFG(GPIO20, AF2)
-#define GPIO23_SMC_nLUA MFP_CFG(GPIO23, AF0)
-#define GPIO25_SMC_nLLA MFP_CFG(GPIO25, AF0)
-#define GPIO27_SMC_IRQ MFP_CFG(GPIO27, AF0)
-#define GPIO28_SMC_RDY MFP_CFG(GPIO28, AF0)
-#define GPIO29_SMC_SCLK MFP_CFG(GPIO29, AF0)
-#define GPIO34_SMC_nCS1 MFP_CFG(GPIO34, AF2)
-#define GPIO35_SMC_BE1 MFP_CFG(GPIO35, AF2)
-#define GPIO36_SMC_BE2 MFP_CFG(GPIO36, AF2)
-
-/* Compact Flash */
-#define GPIO19_CF_nCE1 MFP_CFG(GPIO19, AF3)
-#define GPIO20_CF_nCE2 MFP_CFG(GPIO20, AF3)
-#define GPIO23_CF_nALE MFP_CFG(GPIO23, AF3)
-#define GPIO25_CF_nRESET MFP_CFG(GPIO25, AF3)
-#define GPIO28_CF_RDY MFP_CFG(GPIO28, AF3)
-#define GPIO29_CF_STSCH MFP_CFG(GPIO29, AF3)
-#define GPIO30_CF_nREG MFP_CFG(GPIO30, AF3)
-#define GPIO31_CF_nIOIS16 MFP_CFG(GPIO31, AF3)
-#define GPIO32_CF_nCD1 MFP_CFG(GPIO32, AF3)
-#define GPIO33_CF_nCD2 MFP_CFG(GPIO33, AF3)
-
-/* UART */
-#define GPIO8_UART3_TXD MFP_CFG(GPIO8, AF2)
-#define GPIO9_UART3_RXD MFP_CFG(GPIO9, AF2)
-#define GPIO1O_UART3_CTS MFP_CFG(GPIO10, AF2)
-#define GPIO11_UART3_RTS MFP_CFG(GPIO11, AF2)
-#define GPIO88_UART2_TXD MFP_CFG(GPIO88, AF2)
-#define GPIO89_UART2_RXD MFP_CFG(GPIO89, AF2)
-#define GPIO107_UART1_TXD MFP_CFG_DRV(GPIO107, AF1, FAST)
-#define GPIO107_UART1_RXD MFP_CFG_DRV(GPIO107, AF2, FAST)
-#define GPIO108_UART1_RXD MFP_CFG_DRV(GPIO108, AF1, FAST)
-#define GPIO108_UART1_TXD MFP_CFG_DRV(GPIO108, AF2, FAST)
-#define GPIO109_UART1_CTS MFP_CFG(GPIO109, AF1)
-#define GPIO109_UART1_RTS MFP_CFG(GPIO109, AF2)
-#define GPIO110_UART1_RTS MFP_CFG(GPIO110, AF1)
-#define GPIO110_UART1_CTS MFP_CFG(GPIO110, AF2)
-#define GPIO111_UART1_RI MFP_CFG(GPIO111, AF1)
-#define GPIO111_UART1_DSR MFP_CFG(GPIO111, AF2)
-#define GPIO112_UART1_DTR MFP_CFG(GPIO111, AF1)
-#define GPIO112_UART1_DCD MFP_CFG(GPIO112, AF2)
-
-/* MMC1 */
-#define GPIO37_MMC1_DAT7 MFP_CFG(GPIO37, AF1)
-#define GPIO38_MMC1_DAT6 MFP_CFG(GPIO38, AF1)
-#define GPIO54_MMC1_DAT5 MFP_CFG(GPIO54, AF1)
-#define GPIO48_MMC1_DAT4 MFP_CFG(GPIO48, AF1)
-#define GPIO51_MMC1_DAT3 MFP_CFG(GPIO51, AF1)
-#define GPIO52_MMC1_DAT2 MFP_CFG(GPIO52, AF1)
-#define GPIO40_MMC1_DAT1 MFP_CFG(GPIO40, AF1)
-#define GPIO41_MMC1_DAT0 MFP_CFG(GPIO41, AF1)
-#define GPIO49_MMC1_CMD MFP_CFG(GPIO49, AF1)
-#define GPIO43_MMC1_CLK MFP_CFG(GPIO43, AF1)
-#define GPIO53_MMC1_CD MFP_CFG(GPIO53, AF1)
-#define GPIO46_MMC1_WP MFP_CFG(GPIO46, AF1)
-
-/* MMC2 */
-#define GPIO28_MMC2_CMD MFP_CFG_DRV(GPIO28, AF6, FAST)
-#define GPIO29_MMC2_CLK MFP_CFG_DRV(GPIO29, AF6, FAST)
-#define GPIO30_MMC2_DAT0 MFP_CFG_DRV(GPIO30, AF6, FAST)
-#define GPIO31_MMC2_DAT1 MFP_CFG_DRV(GPIO31, AF6, FAST)
-#define GPIO32_MMC2_DAT2 MFP_CFG_DRV(GPIO32, AF6, FAST)
-#define GPIO33_MMC2_DAT3 MFP_CFG_DRV(GPIO33, AF6, FAST)
-
-/* MMC4 */
-#define GPIO125_MMC4_DAT3 MFP_CFG_DRV(GPIO125, AF7, FAST)
-#define GPIO126_MMC4_DAT2 MFP_CFG_DRV(GPIO126, AF7, FAST)
-#define GPIO127_MMC4_DAT1 MFP_CFG_DRV(GPIO127, AF7, FAST)
-#define GPIO0_2_MMC4_DAT0 MFP_CFG_DRV(GPIO0_2, AF7, FAST)
-#define GPIO1_2_MMC4_CMD MFP_CFG_DRV(GPIO1_2, AF7, FAST)
-#define GPIO2_2_MMC4_CLK MFP_CFG_DRV(GPIO2_2, AF7, FAST)
-
-/* LCD */
-#define GPIO84_LCD_CS MFP_CFG(GPIO84, AF1)
-#define GPIO60_LCD_DD0 MFP_CFG(GPIO60, AF1)
-#define GPIO61_LCD_DD1 MFP_CFG(GPIO61, AF1)
-#define GPIO70_LCD_DD10 MFP_CFG(GPIO70, AF1)
-#define GPIO71_LCD_DD11 MFP_CFG(GPIO71, AF1)
-#define GPIO72_LCD_DD12 MFP_CFG(GPIO72, AF1)
-#define GPIO73_LCD_DD13 MFP_CFG(GPIO73, AF1)
-#define GPIO74_LCD_DD14 MFP_CFG(GPIO74, AF1)
-#define GPIO75_LCD_DD15 MFP_CFG(GPIO75, AF1)
-#define GPIO76_LCD_DD16 MFP_CFG(GPIO76, AF1)
-#define GPIO77_LCD_DD17 MFP_CFG(GPIO77, AF1)
-#define GPIO78_LCD_DD18 MFP_CFG(GPIO78, AF1)
-#define GPIO79_LCD_DD19 MFP_CFG(GPIO79, AF1)
-#define GPIO62_LCD_DD2 MFP_CFG(GPIO62, AF1)
-#define GPIO80_LCD_DD20 MFP_CFG(GPIO80, AF1)
-#define GPIO81_LCD_DD21 MFP_CFG(GPIO81, AF1)
-#define GPIO82_LCD_DD22 MFP_CFG(GPIO82, AF1)
-#define GPIO83_LCD_DD23 MFP_CFG(GPIO83, AF1)
-#define GPIO63_LCD_DD3 MFP_CFG(GPIO63, AF1)
-#define GPIO64_LCD_DD4 MFP_CFG(GPIO64, AF1)
-#define GPIO65_LCD_DD5 MFP_CFG(GPIO65, AF1)
-#define GPIO66_LCD_DD6 MFP_CFG(GPIO66, AF1)
-#define GPIO67_LCD_DD7 MFP_CFG(GPIO67, AF1)
-#define GPIO68_LCD_DD8 MFP_CFG(GPIO68, AF1)
-#define GPIO69_LCD_DD9 MFP_CFG(GPIO69, AF1)
-#define GPIO59_LCD_DENA_BIAS MFP_CFG(GPIO59, AF1)
-#define GPIO56_LCD_FCLK_RD MFP_CFG(GPIO56, AF1)
-#define GPIO57_LCD_LCLK_A0 MFP_CFG(GPIO57, AF1)
-#define GPIO58_LCD_PCLK_WR MFP_CFG(GPIO58, AF1)
-#define GPIO85_LCD_VSYNC MFP_CFG(GPIO85, AF1)
-
-/* I2C */
-#define GPIO105_CI2C_SDA MFP_CFG(GPIO105, AF1)
-#define GPIO106_CI2C_SCL MFP_CFG(GPIO106, AF1)
-
-/* I2S */
-#define GPIO113_I2S_MCLK MFP_CFG(GPIO113, AF6)
-#define GPIO114_I2S_FRM MFP_CFG(GPIO114, AF1)
-#define GPIO115_I2S_BCLK MFP_CFG(GPIO115, AF1)
-#define GPIO116_I2S_RXD MFP_CFG(GPIO116, AF2)
-#define GPIO116_I2S_TXD MFP_CFG(GPIO116, AF1)
-#define GPIO117_I2S_TXD MFP_CFG(GPIO117, AF2)
-
-/* PWM */
-#define GPIO96_PWM3_OUT MFP_CFG(GPIO96, AF1)
-#define GPIO97_PWM2_OUT MFP_CFG(GPIO97, AF1)
-#define GPIO98_PWM1_OUT MFP_CFG(GPIO98, AF1)
-#define GPIO104_PWM4_OUT MFP_CFG(GPIO104, AF1)
-#define GPIO106_PWM2_OUT MFP_CFG(GPIO106, AF2)
-#define GPIO74_PWM4_OUT MFP_CFG(GPIO74, AF2)
-#define GPIO75_PWM3_OUT MFP_CFG(GPIO75, AF2)
-#define GPIO76_PWM2_OUT MFP_CFG(GPIO76, AF2)
-#define GPIO77_PWM1_OUT MFP_CFG(GPIO77, AF2)
-#define GPIO82_PWM4_OUT MFP_CFG(GPIO82, AF2)
-#define GPIO83_PWM3_OUT MFP_CFG(GPIO83, AF2)
-#define GPIO84_PWM2_OUT MFP_CFG(GPIO84, AF2)
-#define GPIO85_PWM1_OUT MFP_CFG(GPIO85, AF2)
-#define GPIO84_PWM1_OUT MFP_CFG(GPIO84, AF4)
-#define GPIO122_PWM3_OUT MFP_CFG(GPIO122, AF3)
-#define GPIO123_PWM1_OUT MFP_CFG(GPIO123, AF1)
-#define GPIO124_PWM2_OUT MFP_CFG(GPIO124, AF1)
-#define GPIO125_PWM3_OUT MFP_CFG(GPIO125, AF1)
-#define GPIO126_PWM4_OUT MFP_CFG(GPIO126, AF1)
-#define GPIO86_PWM1_OUT MFP_CFG(GPIO86, AF2)
-#define GPIO86_PWM2_OUT MFP_CFG(GPIO86, AF3)
-
-/* Keypad */
-#define GPIO109_KP_MKIN1 MFP_CFG(GPIO109, AF7)
-#define GPIO110_KP_MKIN0 MFP_CFG(GPIO110, AF7)
-#define GPIO111_KP_MKOUT7 MFP_CFG(GPIO111, AF7)
-#define GPIO112_KP_MKOUT6 MFP_CFG(GPIO112, AF7)
-#define GPIO121_KP_MKIN4 MFP_CFG(GPIO121, AF7)
-
-/* Fast Ethernet */
-#define GPIO86_TX_CLK MFP_CFG(GPIO86, AF5)
-#define GPIO87_TX_EN MFP_CFG(GPIO87, AF5)
-#define GPIO88_TX_DQ3 MFP_CFG(GPIO88, AF5)
-#define GPIO89_TX_DQ2 MFP_CFG(GPIO89, AF5)
-#define GPIO90_TX_DQ1 MFP_CFG(GPIO90, AF5)
-#define GPIO91_TX_DQ0 MFP_CFG(GPIO91, AF5)
-#define GPIO92_MII_CRS MFP_CFG(GPIO92, AF5)
-#define GPIO93_MII_COL MFP_CFG(GPIO93, AF5)
-#define GPIO94_RX_CLK MFP_CFG(GPIO94, AF5)
-#define GPIO95_RX_ER MFP_CFG(GPIO95, AF5)
-#define GPIO96_RX_DQ3 MFP_CFG(GPIO96, AF5)
-#define GPIO97_RX_DQ2 MFP_CFG(GPIO97, AF5)
-#define GPIO98_RX_DQ1 MFP_CFG(GPIO98, AF5)
-#define GPIO99_RX_DQ0 MFP_CFG(GPIO99, AF5)
-#define GPIO100_MII_MDC MFP_CFG(GPIO100, AF5)
-#define GPIO101_MII_MDIO MFP_CFG(GPIO101, AF5)
-#define GPIO103_RX_DV MFP_CFG(GPIO103, AF5)
-
-/* SSP2 */
-#define GPIO107_SSP2_RXD MFP_CFG(GPIO107, AF4)
-#define GPIO108_SSP2_TXD MFP_CFG(GPIO108, AF4)
-#define GPIO111_SSP2_CLK MFP_CFG(GPIO111, AF4)
-#define GPIO112_SSP2_FRM MFP_CFG(GPIO112, AF4)
-
-#endif /* __ASM_MACH_MFP_PXA168_H */
diff --git a/arch/arm/mach-mmp/mfp-pxa910.h b/arch/arm/mach-mmp/mfp-pxa910.h
deleted file mode 100644
index 6f900cade631..000000000000
--- a/arch/arm/mach-mmp/mfp-pxa910.h
+++ /dev/null
@@ -1,170 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_MACH_MFP_PXA910_H
-#define __ASM_MACH_MFP_PXA910_H
-
-#include "mfp.h"
-
-#define MFP_DRIVE_VERY_SLOW (0x0 << 13)
-#define MFP_DRIVE_SLOW (0x2 << 13)
-#define MFP_DRIVE_MEDIUM (0x4 << 13)
-#define MFP_DRIVE_FAST (0x6 << 13)
-
-/* UART2 */
-#define GPIO47_UART2_RXD MFP_CFG(GPIO47, AF6)
-#define GPIO48_UART2_TXD MFP_CFG(GPIO48, AF6)
-
-/* UART3 */
-#define GPIO31_UART3_RXD MFP_CFG(GPIO31, AF4)
-#define GPIO32_UART3_TXD MFP_CFG(GPIO32, AF4)
-
-/*IRDA*/
-#define GPIO51_IRDA_SHDN MFP_CFG(GPIO51, AF0)
-
-/* SMC */
-#define SM_nCS0_nCS0 MFP_CFG(SM_nCS0, AF0)
-#define SM_ADV_SM_ADV MFP_CFG(SM_ADV, AF0)
-#define SM_SCLK_SM_SCLK MFP_CFG(SM_SCLK, AF0)
-#define SM_BE0_SM_BE0 MFP_CFG(SM_BE0, AF1)
-#define SM_BE1_SM_BE1 MFP_CFG(SM_BE1, AF1)
-
-/* I2C */
-#define GPIO53_CI2C_SCL MFP_CFG(GPIO53, AF2)
-#define GPIO54_CI2C_SDA MFP_CFG(GPIO54, AF2)
-
-/* SSP1 (I2S) */
-#define GPIO24_SSP1_SDATA_IN MFP_CFG_DRV(GPIO24, AF1, MEDIUM)
-#define GPIO21_SSP1_BITCLK MFP_CFG_DRV(GPIO21, AF1, MEDIUM)
-#define GPIO20_SSP1_SYSCLK MFP_CFG_DRV(GPIO20, AF1, MEDIUM)
-#define GPIO22_SSP1_SYNC MFP_CFG_DRV(GPIO22, AF1, MEDIUM)
-#define GPIO23_SSP1_DATA_OUT MFP_CFG_DRV(GPIO23, AF1, MEDIUM)
-#define GPIO124_MN_CLK_OUT MFP_CFG_DRV(GPIO124, AF1, MEDIUM)
-#define GPIO123_CLK_REQ MFP_CFG_DRV(GPIO123, AF0, MEDIUM)
-
-/* DFI */
-#define DF_IO0_ND_IO0 MFP_CFG(DF_IO0, AF0)
-#define DF_IO1_ND_IO1 MFP_CFG(DF_IO1, AF0)
-#define DF_IO2_ND_IO2 MFP_CFG(DF_IO2, AF0)
-#define DF_IO3_ND_IO3 MFP_CFG(DF_IO3, AF0)
-#define DF_IO4_ND_IO4 MFP_CFG(DF_IO4, AF0)
-#define DF_IO5_ND_IO5 MFP_CFG(DF_IO5, AF0)
-#define DF_IO6_ND_IO6 MFP_CFG(DF_IO6, AF0)
-#define DF_IO7_ND_IO7 MFP_CFG(DF_IO7, AF0)
-#define DF_IO8_ND_IO8 MFP_CFG(DF_IO8, AF0)
-#define DF_IO9_ND_IO9 MFP_CFG(DF_IO9, AF0)
-#define DF_IO10_ND_IO10 MFP_CFG(DF_IO10, AF0)
-#define DF_IO11_ND_IO11 MFP_CFG(DF_IO11, AF0)
-#define DF_IO12_ND_IO12 MFP_CFG(DF_IO12, AF0)
-#define DF_IO13_ND_IO13 MFP_CFG(DF_IO13, AF0)
-#define DF_IO14_ND_IO14 MFP_CFG(DF_IO14, AF0)
-#define DF_IO15_ND_IO15 MFP_CFG(DF_IO15, AF0)
-#define DF_nCS0_SM_nCS2_nCS0 MFP_CFG(DF_nCS0_SM_nCS2, AF0)
-#define DF_ALE_SM_WEn_ND_ALE MFP_CFG(DF_ALE_SM_WEn, AF1)
-#define DF_CLE_SM_OEn_ND_CLE MFP_CFG(DF_CLE_SM_OEn, AF0)
-#define DF_WEn_DF_WEn MFP_CFG(DF_WEn, AF1)
-#define DF_REn_DF_REn MFP_CFG(DF_REn, AF1)
-#define DF_RDY0_DF_RDY0 MFP_CFG(DF_RDY0, AF0)
-
-/*keypad*/
-#define GPIO00_KP_MKIN0 MFP_CFG(GPIO0, AF1)
-#define GPIO01_KP_MKOUT0 MFP_CFG(GPIO1, AF1)
-#define GPIO02_KP_MKIN1 MFP_CFG(GPIO2, AF1)
-#define GPIO03_KP_MKOUT1 MFP_CFG(GPIO3, AF1)
-#define GPIO04_KP_MKIN2 MFP_CFG(GPIO4, AF1)
-#define GPIO05_KP_MKOUT2 MFP_CFG(GPIO5, AF1)
-#define GPIO06_KP_MKIN3 MFP_CFG(GPIO6, AF1)
-#define GPIO07_KP_MKOUT3 MFP_CFG(GPIO7, AF1)
-#define GPIO08_KP_MKIN4 MFP_CFG(GPIO8, AF1)
-#define GPIO09_KP_MKOUT4 MFP_CFG(GPIO9, AF1)
-#define GPIO10_KP_MKIN5 MFP_CFG(GPIO10, AF1)
-#define GPIO11_KP_MKOUT5 MFP_CFG(GPIO11, AF1)
-#define GPIO12_KP_MKIN6 MFP_CFG(GPIO12, AF1)
-#define GPIO13_KP_MKOUT6 MFP_CFG(GPIO13, AF1)
-#define GPIO14_KP_MKIN7 MFP_CFG(GPIO14, AF1)
-#define GPIO15_KP_MKOUT7 MFP_CFG(GPIO15, AF1)
-#define GPIO16_KP_DKIN0 MFP_CFG(GPIO16, AF1)
-#define GPIO17_KP_DKIN1 MFP_CFG(GPIO17, AF1)
-#define GPIO18_KP_DKIN2 MFP_CFG(GPIO18, AF1)
-#define GPIO19_KP_DKIN3 MFP_CFG(GPIO19, AF1)
-
-/* LCD */
-#define GPIO81_LCD_FCLK MFP_CFG(GPIO81, AF1)
-#define GPIO82_LCD_LCLK MFP_CFG(GPIO82, AF1)
-#define GPIO83_LCD_PCLK MFP_CFG(GPIO83, AF1)
-#define GPIO84_LCD_DENA MFP_CFG(GPIO84, AF1)
-#define GPIO85_LCD_DD0 MFP_CFG(GPIO85, AF1)
-#define GPIO86_LCD_DD1 MFP_CFG(GPIO86, AF1)
-#define GPIO87_LCD_DD2 MFP_CFG(GPIO87, AF1)
-#define GPIO88_LCD_DD3 MFP_CFG(GPIO88, AF1)
-#define GPIO89_LCD_DD4 MFP_CFG(GPIO89, AF1)
-#define GPIO90_LCD_DD5 MFP_CFG(GPIO90, AF1)
-#define GPIO91_LCD_DD6 MFP_CFG(GPIO91, AF1)
-#define GPIO92_LCD_DD7 MFP_CFG(GPIO92, AF1)
-#define GPIO93_LCD_DD8 MFP_CFG(GPIO93, AF1)
-#define GPIO94_LCD_DD9 MFP_CFG(GPIO94, AF1)
-#define GPIO95_LCD_DD10 MFP_CFG(GPIO95, AF1)
-#define GPIO96_LCD_DD11 MFP_CFG(GPIO96, AF1)
-#define GPIO97_LCD_DD12 MFP_CFG(GPIO97, AF1)
-#define GPIO98_LCD_DD13 MFP_CFG(GPIO98, AF1)
-#define GPIO100_LCD_DD14 MFP_CFG(GPIO100, AF1)
-#define GPIO101_LCD_DD15 MFP_CFG(GPIO101, AF1)
-#define GPIO102_LCD_DD16 MFP_CFG(GPIO102, AF1)
-#define GPIO103_LCD_DD17 MFP_CFG(GPIO103, AF1)
-#define GPIO104_LCD_DD18 MFP_CFG(GPIO104, AF1)
-#define GPIO105_LCD_DD19 MFP_CFG(GPIO105, AF1)
-#define GPIO106_LCD_DD20 MFP_CFG(GPIO106, AF1)
-#define GPIO107_LCD_DD21 MFP_CFG(GPIO107, AF1)
-#define GPIO108_LCD_DD22 MFP_CFG(GPIO108, AF1)
-#define GPIO109_LCD_DD23 MFP_CFG(GPIO109, AF1)
-
-#define GPIO104_LCD_SPIDOUT MFP_CFG(GPIO104, AF3)
-#define GPIO105_LCD_SPIDIN MFP_CFG(GPIO105, AF3)
-#define GPIO107_LCD_CS1 MFP_CFG(GPIO107, AF3)
-#define GPIO108_LCD_DCLK MFP_CFG(GPIO108, AF3)
-
-#define GPIO106_LCD_RESET MFP_CFG(GPIO106, AF0)
-
-/*smart panel*/
-#define GPIO82_LCD_A0 MFP_CFG(GPIO82, AF0)
-#define GPIO83_LCD_WR MFP_CFG(GPIO83, AF0)
-#define GPIO103_LCD_CS MFP_CFG(GPIO103, AF0)
-
-/*1wire*/
-#define GPIO106_1WIRE MFP_CFG(GPIO106, AF3)
-
-/*CCIC*/
-#define GPIO67_CCIC_IN7 MFP_CFG_DRV(GPIO67, AF1, MEDIUM)
-#define GPIO68_CCIC_IN6 MFP_CFG_DRV(GPIO68, AF1, MEDIUM)
-#define GPIO69_CCIC_IN5 MFP_CFG_DRV(GPIO69, AF1, MEDIUM)
-#define GPIO70_CCIC_IN4 MFP_CFG_DRV(GPIO70, AF1, MEDIUM)
-#define GPIO71_CCIC_IN3 MFP_CFG_DRV(GPIO71, AF1, MEDIUM)
-#define GPIO72_CCIC_IN2 MFP_CFG_DRV(GPIO72, AF1, MEDIUM)
-#define GPIO73_CCIC_IN1 MFP_CFG_DRV(GPIO73, AF1, MEDIUM)
-#define GPIO74_CCIC_IN0 MFP_CFG_DRV(GPIO74, AF1, MEDIUM)
-#define GPIO75_CAM_HSYNC MFP_CFG_DRV(GPIO75, AF1, MEDIUM)
-#define GPIO76_CAM_VSYNC MFP_CFG_DRV(GPIO76, AF1, MEDIUM)
-#define GPIO77_CAM_MCLK MFP_CFG_DRV(GPIO77, AF1, MEDIUM)
-#define GPIO78_CAM_PCLK MFP_CFG_DRV(GPIO78, AF1, MEDIUM)
-
-/* MMC1 */
-#define MMC1_DAT7_MMC1_DAT7 MFP_CFG_DRV(MMC1_DAT7, AF0, MEDIUM)
-#define MMC1_DAT6_MMC1_DAT6 MFP_CFG_DRV(MMC1_DAT6, AF0, MEDIUM)
-#define MMC1_DAT5_MMC1_DAT5 MFP_CFG_DRV(MMC1_DAT5, AF0, MEDIUM)
-#define MMC1_DAT4_MMC1_DAT4 MFP_CFG_DRV(MMC1_DAT4, AF0, MEDIUM)
-#define MMC1_DAT3_MMC1_DAT3 MFP_CFG_DRV(MMC1_DAT3, AF0, MEDIUM)
-#define MMC1_DAT2_MMC1_DAT2 MFP_CFG_DRV(MMC1_DAT2, AF0, MEDIUM)
-#define MMC1_DAT1_MMC1_DAT1 MFP_CFG_DRV(MMC1_DAT1, AF0, MEDIUM)
-#define MMC1_DAT0_MMC1_DAT0 MFP_CFG_DRV(MMC1_DAT0, AF0, MEDIUM)
-#define MMC1_CMD_MMC1_CMD MFP_CFG_DRV(MMC1_CMD, AF0, MEDIUM)
-#define MMC1_CLK_MMC1_CLK MFP_CFG_DRV(MMC1_CLK, AF0, MEDIUM)
-#define MMC1_CD_MMC1_CD MFP_CFG_DRV(MMC1_CD, AF0, MEDIUM)
-#define MMC1_WP_MMC1_WP MFP_CFG_DRV(MMC1_WP, AF0, MEDIUM)
-
-/* PWM */
-#define GPIO27_PWM3_AF2 MFP_CFG(GPIO27, AF2)
-#define GPIO51_PWM2_OUT MFP_CFG(GPIO51, AF2)
-#define GPIO117_PWM1_OUT MFP_CFG(GPIO117, AF2)
-#define GPIO118_PWM2_OUT MFP_CFG(GPIO118, AF2)
-#define GPIO119_PWM3_OUT MFP_CFG(GPIO119, AF2)
-#define GPIO120_PWM4_OUT MFP_CFG(GPIO120, AF2)
-
-#endif /* __ASM_MACH MFP_PXA910_H */
diff --git a/arch/arm/mach-mmp/teton_bga.c b/arch/arm/mach-mmp/teton_bga.c
deleted file mode 100644
index 7111535f325f..000000000000
--- a/arch/arm/mach-mmp/teton_bga.c
+++ /dev/null
@@ -1,100 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * linux/arch/arm/mach-mmp/teton_bga.c
- *
- * Support for the Marvell PXA168 Teton BGA Development Platform.
- *
- * Author: Mark F. Brown <mark.brown314 at gmail.com>
- *
- * This code is based on aspenite.c
- */
-
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/platform_device.h>
-#include <linux/gpio.h>
-#include <linux/gpio-pxa.h>
-#include <linux/input.h>
-#include <linux/platform_data/keypad-pxa27x.h>
-#include <linux/i2c.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include "addr-map.h"
-#include "mfp-pxa168.h"
-#include "pxa168.h"
-#include "teton_bga.h"
-#include "irqs.h"
-
-#include "common.h"
-
-static unsigned long teton_bga_pin_config[] __initdata = {
- /* UART1 */
- GPIO107_UART1_TXD,
- GPIO108_UART1_RXD,
-
- /* Keypad */
- GPIO109_KP_MKIN1,
- GPIO110_KP_MKIN0,
- GPIO111_KP_MKOUT7,
- GPIO112_KP_MKOUT6,
-
- /* I2C Bus */
- GPIO105_CI2C_SDA,
- GPIO106_CI2C_SCL,
-
- /* RTC */
- GPIO78_GPIO,
-};
-
-static struct pxa_gpio_platform_data pxa168_gpio_pdata = {
- .irq_base = MMP_GPIO_TO_IRQ(0),
-};
-
-static unsigned int teton_bga_matrix_key_map[] = {
- KEY(0, 6, KEY_ESC),
- KEY(0, 7, KEY_ENTER),
- KEY(1, 6, KEY_LEFT),
- KEY(1, 7, KEY_RIGHT),
-};
-
-static struct matrix_keymap_data teton_bga_matrix_keymap_data = {
- .keymap = teton_bga_matrix_key_map,
- .keymap_size = ARRAY_SIZE(teton_bga_matrix_key_map),
-};
-
-static struct pxa27x_keypad_platform_data teton_bga_keypad_info __initdata = {
- .matrix_key_rows = 2,
- .matrix_key_cols = 8,
- .matrix_keymap_data = &teton_bga_matrix_keymap_data,
- .debounce_interval = 30,
-};
-
-static struct i2c_board_info teton_bga_i2c_info[] __initdata = {
- {
- I2C_BOARD_INFO("ds1337", 0x68),
- .irq = MMP_GPIO_TO_IRQ(RTC_INT_GPIO)
- },
-};
-
-static void __init teton_bga_init(void)
-{
- mfp_config(ARRAY_AND_SIZE(teton_bga_pin_config));
-
- /* on-chip devices */
- pxa168_add_uart(1);
- pxa168_add_keypad(&teton_bga_keypad_info);
- pxa168_add_twsi(0, NULL, ARRAY_AND_SIZE(teton_bga_i2c_info));
- platform_device_add_data(&pxa168_device_gpio, &pxa168_gpio_pdata,
- sizeof(struct pxa_gpio_platform_data));
- platform_device_register(&pxa168_device_gpio);
-}
-
-MACHINE_START(TETON_BGA, "PXA168-based Teton BGA Development Platform")
- .map_io = mmp_map_io,
- .nr_irqs = MMP_NR_IRQS,
- .init_irq = pxa168_init_irq,
- .init_time = pxa168_timer_init,
- .init_machine = teton_bga_init,
- .restart = pxa168_restart,
-MACHINE_END
diff --git a/arch/arm/mach-mmp/teton_bga.h b/arch/arm/mach-mmp/teton_bga.h
deleted file mode 100644
index 73050096f0bd..000000000000
--- a/arch/arm/mach-mmp/teton_bga.h
+++ /dev/null
@@ -1,22 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * Support for the Marvell PXA168 Teton BGA Development Platform.
- */
-#ifndef __ASM_MACH_TETON_BGA_H
-#define __ASM_MACH_TETON_BGA_H
-
-/* GPIOs */
-#define MMC_PWENA_GPIO 27
-#define USBHPENB_GPIO 55
-#define RTC_INT_GPIO 78
-#define LCD_VBLK_EN_GPIO 79
-#define LCD_DVDD_EN_GPIO 80
-#define RST_WIFI_GPIO 81
-#define CF_PWEN_GPIO 82
-#define USB_OC_GPIO 83
-#define PWM_GPIO 84
-#define USBHPENA_GPIO 85
-#define TS_INT_GPIO 86
-#define CIR_GPIO 108
-
-#endif /* __ASM_MACH_TETON_BGA_H */
diff --git a/arch/arm/mach-mmp/ttc_dkb.c b/arch/arm/mach-mmp/ttc_dkb.c
deleted file mode 100644
index 345b2e6d5c7e..000000000000
--- a/arch/arm/mach-mmp/ttc_dkb.c
+++ /dev/null
@@ -1,315 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * linux/arch/arm/mach-mmp/ttc_dkb.c
- *
- * Support for the Marvell PXA910-based TTC_DKB Development Platform.
- */
-
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/platform_device.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-#include <linux/mtd/onenand.h>
-#include <linux/interrupt.h>
-#include <linux/platform_data/pca953x.h>
-#include <linux/gpio.h>
-#include <linux/gpio-pxa.h>
-#include <linux/mfd/88pm860x.h>
-#include <linux/platform_data/mv_usb.h>
-#include <linux/spi/spi.h>
-#include <linux/delay.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/flash.h>
-#include "addr-map.h"
-#include "mfp-pxa910.h"
-#include "pxa910.h"
-#include "irqs.h"
-#include "regs-usb.h"
-
-#include "common.h"
-
-#define TTCDKB_GPIO_EXT0(x) (MMP_NR_BUILTIN_GPIO + ((x < 0) ? 0 : \
- ((x < 16) ? x : 15)))
-#define TTCDKB_GPIO_EXT1(x) (MMP_NR_BUILTIN_GPIO + 16 + ((x < 0) ? 0 : \
- ((x < 16) ? x : 15)))
-
-/*
- * 16 board interrupts -- MAX7312 GPIO expander
- * 16 board interrupts -- PCA9575 GPIO expander
- * 24 board interrupts -- 88PM860x PMIC
- */
-#define TTCDKB_NR_IRQS (MMP_NR_IRQS + 16 + 16 + 24)
-
-static unsigned long ttc_dkb_pin_config[] __initdata = {
- /* UART2 */
- GPIO47_UART2_RXD,
- GPIO48_UART2_TXD,
-
- /* DFI */
- DF_IO0_ND_IO0,
- DF_IO1_ND_IO1,
- DF_IO2_ND_IO2,
- DF_IO3_ND_IO3,
- DF_IO4_ND_IO4,
- DF_IO5_ND_IO5,
- DF_IO6_ND_IO6,
- DF_IO7_ND_IO7,
- DF_IO8_ND_IO8,
- DF_IO9_ND_IO9,
- DF_IO10_ND_IO10,
- DF_IO11_ND_IO11,
- DF_IO12_ND_IO12,
- DF_IO13_ND_IO13,
- DF_IO14_ND_IO14,
- DF_IO15_ND_IO15,
- DF_nCS0_SM_nCS2_nCS0,
- DF_ALE_SM_WEn_ND_ALE,
- DF_CLE_SM_OEn_ND_CLE,
- DF_WEn_DF_WEn,
- DF_REn_DF_REn,
- DF_RDY0_DF_RDY0,
-};
-
-static struct pxa_gpio_platform_data pxa910_gpio_pdata = {
- .irq_base = MMP_GPIO_TO_IRQ(0),
-};
-
-static struct mtd_partition ttc_dkb_onenand_partitions[] = {
- {
- .name = "bootloader",
- .offset = 0,
- .size = SZ_1M,
- .mask_flags = MTD_WRITEABLE,
- }, {
- .name = "reserved",
- .offset = MTDPART_OFS_APPEND,
- .size = SZ_128K,
- .mask_flags = MTD_WRITEABLE,
- }, {
- .name = "reserved",
- .offset = MTDPART_OFS_APPEND,
- .size = SZ_8M,
- .mask_flags = MTD_WRITEABLE,
- }, {
- .name = "kernel",
- .offset = MTDPART_OFS_APPEND,
- .size = (SZ_2M + SZ_1M),
- .mask_flags = 0,
- }, {
- .name = "filesystem",
- .offset = MTDPART_OFS_APPEND,
- .size = SZ_32M + SZ_16M,
- .mask_flags = 0,
- }
-};
-
-static struct onenand_platform_data ttc_dkb_onenand_info = {
- .parts = ttc_dkb_onenand_partitions,
- .nr_parts = ARRAY_SIZE(ttc_dkb_onenand_partitions),
-};
-
-static struct resource ttc_dkb_resource_onenand[] = {
- [0] = {
- .start = SMC_CS0_PHYS_BASE,
- .end = SMC_CS0_PHYS_BASE + SZ_1M,
- .flags = IORESOURCE_MEM,
- },
-};
-
-static struct platform_device ttc_dkb_device_onenand = {
- .name = "onenand-flash",
- .id = -1,
- .resource = ttc_dkb_resource_onenand,
- .num_resources = ARRAY_SIZE(ttc_dkb_resource_onenand),
- .dev = {
- .platform_data = &ttc_dkb_onenand_info,
- },
-};
-
-static struct platform_device *ttc_dkb_devices[] = {
- &pxa910_device_gpio,
- &pxa910_device_rtc,
- &ttc_dkb_device_onenand,
-};
-
-static struct pca953x_platform_data max7312_data[] = {
- {
- .gpio_base = TTCDKB_GPIO_EXT0(0),
- .irq_base = MMP_NR_IRQS,
- },
-};
-
-static struct pm860x_platform_data ttc_dkb_pm8607_info = {
- .irq_base = IRQ_BOARD_START,
-};
-
-static struct i2c_board_info ttc_dkb_i2c_info[] = {
- {
- .type = "88PM860x",
- .addr = 0x34,
- .platform_data = &ttc_dkb_pm8607_info,
- .irq = IRQ_PXA910_PMIC_INT,
- },
- {
- .type = "max7312",
- .addr = 0x23,
- .irq = MMP_GPIO_TO_IRQ(80),
- .platform_data = &max7312_data,
- },
-};
-
-#if IS_ENABLED(CONFIG_USB_SUPPORT)
-#if IS_ENABLED(CONFIG_USB_MV_UDC) || IS_ENABLED(CONFIG_USB_EHCI_MV_U2O)
-
-static struct mv_usb_platform_data ttc_usb_pdata = {
- .vbus = NULL,
- .mode = MV_USB_MODE_OTG,
- .otg_force_a_bus_req = 1,
- .phy_init = pxa_usb_phy_init,
- .phy_deinit = pxa_usb_phy_deinit,
- .set_vbus = NULL,
-};
-#endif
-#endif
-
-#if IS_ENABLED(CONFIG_MTD_NAND_MARVELL)
-static struct pxa3xx_nand_platform_data dkb_nand_info = {};
-#endif
-
-#if IS_ENABLED(CONFIG_MMP_DISP)
-/* path config */
-#define CFG_IOPADMODE(iopad) (iopad) /* 0x0 ~ 0xd */
-#define SCLK_SOURCE_SELECT(x) (x << 30) /* 0x0 ~ 0x3 */
-/* link config */
-#define CFG_DUMBMODE(mode) (mode << 28) /* 0x0 ~ 0x6*/
-static struct mmp_mach_path_config dkb_disp_config[] = {
- [0] = {
- .name = "mmp-parallel",
- .overlay_num = 2,
- .output_type = PATH_OUT_PARALLEL,
- .path_config = CFG_IOPADMODE(0x1)
- | SCLK_SOURCE_SELECT(0x1),
- .link_config = CFG_DUMBMODE(0x2),
- },
-};
-
-static struct mmp_mach_plat_info dkb_disp_info = {
- .name = "mmp-disp",
- .clk_name = "disp0",
- .path_num = 1,
- .paths = dkb_disp_config,
-};
-
-static struct mmp_buffer_driver_mach_info dkb_fb_info = {
- .name = "mmp-fb",
- .path_name = "mmp-parallel",
- .overlay_id = 0,
- .dmafetch_id = 1,
- .default_pixfmt = PIXFMT_RGB565,
-};
-
-static void dkb_tpo_panel_power(int on)
-{
- int err;
- u32 spi_reset = mfp_to_gpio(MFP_PIN_GPIO106);
-
- if (on) {
- err = gpio_request(spi_reset, "TPO_LCD_SPI_RESET");
- if (err) {
- pr_err("failed to request GPIO for TPO LCD RESET\n");
- return;
- }
- gpio_direction_output(spi_reset, 0);
- udelay(100);
- gpio_set_value(spi_reset, 1);
- gpio_free(spi_reset);
- } else {
- err = gpio_request(spi_reset, "TPO_LCD_SPI_RESET");
- if (err) {
- pr_err("failed to request LCD RESET gpio\n");
- return;
- }
- gpio_set_value(spi_reset, 0);
- gpio_free(spi_reset);
- }
-}
-
-static struct mmp_mach_panel_info dkb_tpo_panel_info = {
- .name = "tpo-hvga",
- .plat_path_name = "mmp-parallel",
- .plat_set_onoff = dkb_tpo_panel_power,
-};
-
-static struct spi_board_info spi_board_info[] __initdata = {
- {
- .modalias = "tpo-hvga",
- .platform_data = &dkb_tpo_panel_info,
- .bus_num = 5,
- }
-};
-
-static void __init add_disp(void)
-{
- mmp_register_device(&pxa910_device_disp,
- &dkb_disp_info, sizeof(dkb_disp_info));
- spi_register_board_info(spi_board_info, ARRAY_SIZE(spi_board_info));
- mmp_register_device(&pxa910_device_fb,
- &dkb_fb_info, sizeof(dkb_fb_info));
- mmp_register_device(&pxa910_device_panel,
- &dkb_tpo_panel_info, sizeof(dkb_tpo_panel_info));
-}
-#endif
-
-static void __init ttc_dkb_init(void)
-{
- mfp_config(ARRAY_AND_SIZE(ttc_dkb_pin_config));
-
- /* on-chip devices */
- pxa910_add_uart(1);
-#if IS_ENABLED(CONFIG_MTD_NAND_MARVELL)
- pxa910_add_nand(&dkb_nand_info);
-#endif
-
- /* off-chip devices */
- pxa910_add_twsi(0, NULL, ARRAY_AND_SIZE(ttc_dkb_i2c_info));
- platform_device_add_data(&pxa910_device_gpio, &pxa910_gpio_pdata,
- sizeof(struct pxa_gpio_platform_data));
- platform_add_devices(ARRAY_AND_SIZE(ttc_dkb_devices));
-
-#if IS_ENABLED(CONFIG_USB_SUPPORT)
-#if IS_ENABLED(CONFIG_PHY_PXA_USB)
- platform_device_register(&pxa168_device_usb_phy);
-#endif
-
-#if IS_ENABLED(CONFIG_USB_MV_UDC)
- pxa168_device_u2o.dev.platform_data = &ttc_usb_pdata;
- platform_device_register(&pxa168_device_u2o);
-#endif
-
-#if IS_ENABLED(CONFIG_USB_EHCI_MV_U2O)
- pxa168_device_u2oehci.dev.platform_data = &ttc_usb_pdata;
- platform_device_register(&pxa168_device_u2oehci);
-#endif
-
-#if IS_ENABLED(CONFIG_USB_MV_OTG)
- pxa168_device_u2ootg.dev.platform_data = &ttc_usb_pdata;
- platform_device_register(&pxa168_device_u2ootg);
-#endif
-#endif
-
-#if IS_ENABLED(CONFIG_MMP_DISP)
- add_disp();
-#endif
-}
-
-MACHINE_START(TTC_DKB, "PXA910-based TTC_DKB Development Platform")
- .map_io = mmp_map_io,
- .nr_irqs = TTCDKB_NR_IRQS,
- .init_irq = pxa910_init_irq,
- .init_time = pxa910_timer_init,
- .init_machine = ttc_dkb_init,
- .restart = mmp_restart,
-MACHINE_END
--
2.29.2
More information about the linux-arm-kernel
mailing list