[PATCH 05/15] arm64: dts: imx8mp-evk: enable uart1/3 ports

[Peng Fan]

Hi Marco,

On 10/20/2022 7:07 PM, Marco Felsch wrote:
> Hi Peng,
> 
> On 22-10-20, Peng Fan (OSS) wrote:
>> From: Peng Fan <peng.fan at nxp.com>
>>
>> Enable uart1/3 ports for evk board.
>>
>> Signed-off-by: Peng Fan <peng.fan at nxp.com>
>> ---
>>   arch/arm64/boot/dts/freescale/imx8mp-evk.dts | 36 ++++++++++++++++++++
>>   1 file changed, 36 insertions(+)
>>
>> diff --git a/arch/arm64/boot/dts/freescale/imx8mp-evk.dts b/arch/arm64/boot/dts/freescale/imx8mp-evk.dts
>> index 2e29bb3c041c..366f709f8790 100644
>> --- a/arch/arm64/boot/dts/freescale/imx8mp-evk.dts
>> +++ b/arch/arm64/boot/dts/freescale/imx8mp-evk.dts
>> @@ -428,6 +428,15 @@ &snvs_pwrkey {
>>   	status = "okay";
>>   };
>>   
>> +&uart1 { /* BT */
>> +	pinctrl-names = "default";
>> +	pinctrl-0 = <&pinctrl_uart1>;
>> +	assigned-clocks = <&clk IMX8MP_CLK_UART1>;
>> +	assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_80M>;
> 
> I'm curious, what is the default parent and why is this wrong? For the
> already exisiting uart2 we don't do that. Same applies for uart3.

The default parent is OSC_24M. The uart2 is for console, so 24M is ok.
As I recall, we met issue 24M not able to get higher baudrate.


Regards,
Peng.
> 
> Regards,
>    Marco
> 
> 
>> +	fsl,uart-has-rtscts;
>> +	status = "okay";
>> +};
>> +
>>   &uart2 {
>>   	/* console */
>>   	pinctrl-names = "default";
>> @@ -450,6 +459,15 @@ &usb_dwc3_1 {
>>   	status = "okay";
>>   };
>>   
>> +&uart3 {
>> +	pinctrl-names = "default";
>> +	pinctrl-0 = <&pinctrl_uart3>;
>> +	assigned-clocks = <&clk IMX8MP_CLK_UART3>;
>> +	assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_80M>;
>> +	fsl,uart-has-rtscts;
>> +	status = "okay";
>> +};
>> +
>>   &usdhc2 {
>>   	assigned-clocks = <&clk IMX8MP_CLK_USDHC2>;
>>   	assigned-clock-rates = <400000000>;
>> @@ -625,6 +643,15 @@ MX8MP_IOMUXC_SD2_RESET_B__GPIO2_IO19	0x40
>>   		>;
>>   	};
>>   
>> +	pinctrl_uart1: uart1grp {
>> +		fsl,pins = <
>> +			MX8MP_IOMUXC_UART1_RXD__UART1_DCE_RX	0x140
>> +			MX8MP_IOMUXC_UART1_TXD__UART1_DCE_TX	0x140
>> +			MX8MP_IOMUXC_UART3_RXD__UART1_DCE_CTS	0x140
>> +			MX8MP_IOMUXC_UART3_TXD__UART1_DCE_RTS	0x140
>> +		>;
>> +	};
>> +
>>   	pinctrl_uart2: uart2grp {
>>   		fsl,pins = <
>>   			MX8MP_IOMUXC_UART2_RXD__UART2_DCE_RX	0x140
>> @@ -638,6 +665,15 @@ MX8MP_IOMUXC_GPIO1_IO14__USB2_OTG_PWR	0x10
>>   		>;
>>   	};
>>   
>> +	pinctrl_uart3: uart3grp {
>> +		fsl,pins = <
>> +			MX8MP_IOMUXC_ECSPI1_SCLK__UART3_DCE_RX		0x140
>> +			MX8MP_IOMUXC_ECSPI1_MOSI__UART3_DCE_TX		0x140
>> +			MX8MP_IOMUXC_ECSPI1_SS0__UART3_DCE_RTS		0x140
>> +			MX8MP_IOMUXC_ECSPI1_MISO__UART3_DCE_CTS		0x140
>> +		>;
>> +	};
>> +
>>   	pinctrl_usdhc2: usdhc2grp {
>>   		fsl,pins = <
>>   			MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK	0x190
>> -- 
>> 2.37.1
>>
>>
>>