[PATCH 11/14] pata: remove palmchip bk3710 driver
Damien Le Moal
damien.lemoal at opensource.wdc.com
Thu Oct 20 16:03:38 PDT 2022
On 10/20/22 00:29, Arnd Bergmann wrote:
> From: Arnd Bergmann <arnd at arndb.de>
>
> This device was used only on the davinci dm644x platform that
> is now gone, and no references to the device remain in the
> kernel.
>
> Signed-off-by: Arnd Bergmann <arnd at arndb.de>
Applied to libata tree for-6.2 branch (and for-next).
Note that I fixed-up the patch title to:
ata: remove palmchip pata_bk3710 driver
Thanks !
> ---
> drivers/ata/Kconfig | 10 -
> drivers/ata/Makefile | 1 -
> drivers/ata/pata_bk3710.c | 380 --------------------------------------
> 3 files changed, 391 deletions(-)
> delete mode 100644 drivers/ata/pata_bk3710.c
>
> diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig
> index 36833a862998..2986fc9c797e 100644
> --- a/drivers/ata/Kconfig
> +++ b/drivers/ata/Kconfig
> @@ -609,16 +609,6 @@ config PATA_ATP867X
>
> If unsure, say N.
>
> -config PATA_BK3710
> - tristate "Palmchip BK3710 PATA support"
> - depends on ARCH_DAVINCI || COMPILE_TEST
> - select PATA_TIMINGS
> - help
> - This option enables support for the integrated IDE controller on
> - the TI DaVinci SoC.
> -
> - If unsure, say N.
> -
> config PATA_CMD64X
> tristate "CMD64x PATA support"
> depends on PCI
> diff --git a/drivers/ata/Makefile b/drivers/ata/Makefile
> index 34623365d9a6..d2e36d367274 100644
> --- a/drivers/ata/Makefile
> +++ b/drivers/ata/Makefile
> @@ -54,7 +54,6 @@ obj-$(CONFIG_PATA_AMD) += pata_amd.o
> obj-$(CONFIG_PATA_ARTOP) += pata_artop.o
> obj-$(CONFIG_PATA_ATIIXP) += pata_atiixp.o
> obj-$(CONFIG_PATA_ATP867X) += pata_atp867x.o
> -obj-$(CONFIG_PATA_BK3710) += pata_bk3710.o
> obj-$(CONFIG_PATA_CMD64X) += pata_cmd64x.o
> obj-$(CONFIG_PATA_CS5520) += pata_cs5520.o
> obj-$(CONFIG_PATA_CS5530) += pata_cs5530.o
> diff --git a/drivers/ata/pata_bk3710.c b/drivers/ata/pata_bk3710.c
> deleted file mode 100644
> index fad95cfecced..000000000000
> --- a/drivers/ata/pata_bk3710.c
> +++ /dev/null
> @@ -1,380 +0,0 @@
> -// SPDX-License-Identifier: GPL-2.0
> -
> -/*
> - * Palmchip BK3710 PATA controller driver
> - *
> - * Copyright (c) 2017 Samsung Electronics Co., Ltd.
> - * http://www.samsung.com
> - *
> - * Based on palm_bk3710.c:
> - *
> - * Copyright (C) 2006 Texas Instruments.
> - * Copyright (C) 2007 MontaVista Software, Inc., <source at mvista.com>
> - */
> -
> -#include <linux/ata.h>
> -#include <linux/clk.h>
> -#include <linux/delay.h>
> -#include <linux/init.h>
> -#include <linux/ioport.h>
> -#include <linux/kernel.h>
> -#include <linux/libata.h>
> -#include <linux/module.h>
> -#include <linux/platform_device.h>
> -#include <linux/types.h>
> -
> -#define DRV_NAME "pata_bk3710"
> -
> -#define BK3710_TF_OFFSET 0x1F0
> -#define BK3710_CTL_OFFSET 0x3F6
> -
> -#define BK3710_BMISP 0x02
> -#define BK3710_IDETIMP 0x40
> -#define BK3710_UDMACTL 0x48
> -#define BK3710_MISCCTL 0x50
> -#define BK3710_REGSTB 0x54
> -#define BK3710_REGRCVR 0x58
> -#define BK3710_DATSTB 0x5C
> -#define BK3710_DATRCVR 0x60
> -#define BK3710_DMASTB 0x64
> -#define BK3710_DMARCVR 0x68
> -#define BK3710_UDMASTB 0x6C
> -#define BK3710_UDMATRP 0x70
> -#define BK3710_UDMAENV 0x74
> -#define BK3710_IORDYTMP 0x78
> -
> -static struct scsi_host_template pata_bk3710_sht = {
> - ATA_BMDMA_SHT(DRV_NAME),
> -};
> -
> -static unsigned int ideclk_period; /* in nanoseconds */
> -
> -struct pata_bk3710_udmatiming {
> - unsigned int rptime; /* tRP -- Ready to pause time (nsec) */
> - unsigned int cycletime; /* tCYCTYP2/2 -- avg Cycle Time (nsec) */
> - /* tENV is always a minimum of 20 nsec */
> -};
> -
> -static const struct pata_bk3710_udmatiming pata_bk3710_udmatimings[6] = {
> - { 160, 240 / 2 }, /* UDMA Mode 0 */
> - { 125, 160 / 2 }, /* UDMA Mode 1 */
> - { 100, 120 / 2 }, /* UDMA Mode 2 */
> - { 100, 90 / 2 }, /* UDMA Mode 3 */
> - { 100, 60 / 2 }, /* UDMA Mode 4 */
> - { 85, 40 / 2 }, /* UDMA Mode 5 */
> -};
> -
> -static void pata_bk3710_setudmamode(void __iomem *base, unsigned int dev,
> - unsigned int mode)
> -{
> - u32 val32;
> - u16 val16;
> - u8 tenv, trp, t0;
> -
> - /* DMA Data Setup */
> - t0 = DIV_ROUND_UP(pata_bk3710_udmatimings[mode].cycletime,
> - ideclk_period) - 1;
> - tenv = DIV_ROUND_UP(20, ideclk_period) - 1;
> - trp = DIV_ROUND_UP(pata_bk3710_udmatimings[mode].rptime,
> - ideclk_period) - 1;
> -
> - /* udmastb Ultra DMA Access Strobe Width */
> - val32 = ioread32(base + BK3710_UDMASTB) & (0xFF << (dev ? 0 : 8));
> - val32 |= t0 << (dev ? 8 : 0);
> - iowrite32(val32, base + BK3710_UDMASTB);
> -
> - /* udmatrp Ultra DMA Ready to Pause Time */
> - val32 = ioread32(base + BK3710_UDMATRP) & (0xFF << (dev ? 0 : 8));
> - val32 |= trp << (dev ? 8 : 0);
> - iowrite32(val32, base + BK3710_UDMATRP);
> -
> - /* udmaenv Ultra DMA envelop Time */
> - val32 = ioread32(base + BK3710_UDMAENV) & (0xFF << (dev ? 0 : 8));
> - val32 |= tenv << (dev ? 8 : 0);
> - iowrite32(val32, base + BK3710_UDMAENV);
> -
> - /* Enable UDMA for Device */
> - val16 = ioread16(base + BK3710_UDMACTL) | (1 << dev);
> - iowrite16(val16, base + BK3710_UDMACTL);
> -}
> -
> -static void pata_bk3710_setmwdmamode(void __iomem *base, unsigned int dev,
> - unsigned short min_cycle,
> - unsigned int mode)
> -{
> - const struct ata_timing *t;
> - int cycletime;
> - u32 val32;
> - u16 val16;
> - u8 td, tkw, t0;
> -
> - t = ata_timing_find_mode(mode);
> - cycletime = max_t(int, t->cycle, min_cycle);
> -
> - /* DMA Data Setup */
> - t0 = DIV_ROUND_UP(cycletime, ideclk_period);
> - td = DIV_ROUND_UP(t->active, ideclk_period);
> - tkw = t0 - td - 1;
> - td--;
> -
> - val32 = ioread32(base + BK3710_DMASTB) & (0xFF << (dev ? 0 : 8));
> - val32 |= td << (dev ? 8 : 0);
> - iowrite32(val32, base + BK3710_DMASTB);
> -
> - val32 = ioread32(base + BK3710_DMARCVR) & (0xFF << (dev ? 0 : 8));
> - val32 |= tkw << (dev ? 8 : 0);
> - iowrite32(val32, base + BK3710_DMARCVR);
> -
> - /* Disable UDMA for Device */
> - val16 = ioread16(base + BK3710_UDMACTL) & ~(1 << dev);
> - iowrite16(val16, base + BK3710_UDMACTL);
> -}
> -
> -static void pata_bk3710_set_dmamode(struct ata_port *ap,
> - struct ata_device *adev)
> -{
> - void __iomem *base = (void __iomem *)ap->ioaddr.bmdma_addr;
> - int is_slave = adev->devno;
> - const u8 xferspeed = adev->dma_mode;
> -
> - if (xferspeed >= XFER_UDMA_0)
> - pata_bk3710_setudmamode(base, is_slave,
> - xferspeed - XFER_UDMA_0);
> - else
> - pata_bk3710_setmwdmamode(base, is_slave,
> - adev->id[ATA_ID_EIDE_DMA_MIN],
> - xferspeed);
> -}
> -
> -static void pata_bk3710_setpiomode(void __iomem *base, struct ata_device *pair,
> - unsigned int dev, unsigned int cycletime,
> - unsigned int mode)
> -{
> - const struct ata_timing *t;
> - u32 val32;
> - u8 t2, t2i, t0;
> -
> - t = ata_timing_find_mode(XFER_PIO_0 + mode);
> -
> - /* PIO Data Setup */
> - t0 = DIV_ROUND_UP(cycletime, ideclk_period);
> - t2 = DIV_ROUND_UP(t->active, ideclk_period);
> -
> - t2i = t0 - t2 - 1;
> - t2--;
> -
> - val32 = ioread32(base + BK3710_DATSTB) & (0xFF << (dev ? 0 : 8));
> - val32 |= t2 << (dev ? 8 : 0);
> - iowrite32(val32, base + BK3710_DATSTB);
> -
> - val32 = ioread32(base + BK3710_DATRCVR) & (0xFF << (dev ? 0 : 8));
> - val32 |= t2i << (dev ? 8 : 0);
> - iowrite32(val32, base + BK3710_DATRCVR);
> -
> - /* FIXME: this is broken also in the old driver */
> - if (pair) {
> - u8 mode2 = pair->pio_mode - XFER_PIO_0;
> -
> - if (mode2 < mode)
> - mode = mode2;
> - }
> -
> - /* TASKFILE Setup */
> - t0 = DIV_ROUND_UP(t->cyc8b, ideclk_period);
> - t2 = DIV_ROUND_UP(t->act8b, ideclk_period);
> -
> - t2i = t0 - t2 - 1;
> - t2--;
> -
> - val32 = ioread32(base + BK3710_REGSTB) & (0xFF << (dev ? 0 : 8));
> - val32 |= t2 << (dev ? 8 : 0);
> - iowrite32(val32, base + BK3710_REGSTB);
> -
> - val32 = ioread32(base + BK3710_REGRCVR) & (0xFF << (dev ? 0 : 8));
> - val32 |= t2i << (dev ? 8 : 0);
> - iowrite32(val32, base + BK3710_REGRCVR);
> -}
> -
> -static void pata_bk3710_set_piomode(struct ata_port *ap,
> - struct ata_device *adev)
> -{
> - void __iomem *base = (void __iomem *)ap->ioaddr.bmdma_addr;
> - struct ata_device *pair = ata_dev_pair(adev);
> - const struct ata_timing *t = ata_timing_find_mode(adev->pio_mode);
> - const u16 *id = adev->id;
> - unsigned int cycle_time = 0;
> - int is_slave = adev->devno;
> - const u8 pio = adev->pio_mode - XFER_PIO_0;
> -
> - if (id[ATA_ID_FIELD_VALID] & 2) {
> - if (ata_id_has_iordy(id))
> - cycle_time = id[ATA_ID_EIDE_PIO_IORDY];
> - else
> - cycle_time = id[ATA_ID_EIDE_PIO];
> -
> - /* conservative "downgrade" for all pre-ATA2 drives */
> - if (pio < 3 && cycle_time < t->cycle)
> - cycle_time = 0; /* use standard timing */
> - }
> -
> - if (!cycle_time)
> - cycle_time = t->cycle;
> -
> - pata_bk3710_setpiomode(base, pair, is_slave, cycle_time, pio);
> -}
> -
> -static void pata_bk3710_chipinit(void __iomem *base)
> -{
> - /*
> - * REVISIT: the ATA reset signal needs to be managed through a
> - * GPIO, which means it should come from platform_data. Until
> - * we get and use such information, we have to trust that things
> - * have been reset before we get here.
> - */
> -
> - /*
> - * Program the IDETIMP Register Value based on the following assumptions
> - *
> - * (ATA_IDETIMP_IDEEN , ENABLE ) |
> - * (ATA_IDETIMP_PREPOST1 , DISABLE) |
> - * (ATA_IDETIMP_PREPOST0 , DISABLE) |
> - *
> - * DM6446 silicon rev 2.1 and earlier have no observed net benefit
> - * from enabling prefetch/postwrite.
> - */
> - iowrite16(BIT(15), base + BK3710_IDETIMP);
> -
> - /*
> - * UDMACTL Ultra-ATA DMA Control
> - * (ATA_UDMACTL_UDMAP1 , 0 ) |
> - * (ATA_UDMACTL_UDMAP0 , 0 )
> - *
> - */
> - iowrite16(0, base + BK3710_UDMACTL);
> -
> - /*
> - * MISCCTL Miscellaneous Conrol Register
> - * (ATA_MISCCTL_HWNHLD1P , 1 cycle)
> - * (ATA_MISCCTL_HWNHLD0P , 1 cycle)
> - * (ATA_MISCCTL_TIMORIDE , 1)
> - */
> - iowrite32(0x001, base + BK3710_MISCCTL);
> -
> - /*
> - * IORDYTMP IORDY Timer for Primary Register
> - * (ATA_IORDYTMP_IORDYTMP , DISABLE)
> - */
> - iowrite32(0, base + BK3710_IORDYTMP);
> -
> - /*
> - * Configure BMISP Register
> - * (ATA_BMISP_DMAEN1 , DISABLE ) |
> - * (ATA_BMISP_DMAEN0 , DISABLE ) |
> - * (ATA_BMISP_IORDYINT , CLEAR) |
> - * (ATA_BMISP_INTRSTAT , CLEAR) |
> - * (ATA_BMISP_DMAERROR , CLEAR)
> - */
> - iowrite16(0xE, base + BK3710_BMISP);
> -
> - pata_bk3710_setpiomode(base, NULL, 0, 600, 0);
> - pata_bk3710_setpiomode(base, NULL, 1, 600, 0);
> -}
> -
> -static struct ata_port_operations pata_bk3710_ports_ops = {
> - .inherits = &ata_bmdma_port_ops,
> - .cable_detect = ata_cable_80wire,
> -
> - .set_piomode = pata_bk3710_set_piomode,
> - .set_dmamode = pata_bk3710_set_dmamode,
> -};
> -
> -static int __init pata_bk3710_probe(struct platform_device *pdev)
> -{
> - struct clk *clk;
> - struct resource *mem;
> - struct ata_host *host;
> - struct ata_port *ap;
> - void __iomem *base;
> - unsigned long rate;
> - int irq;
> -
> - clk = devm_clk_get(&pdev->dev, NULL);
> - if (IS_ERR(clk))
> - return -ENODEV;
> -
> - clk_enable(clk);
> - rate = clk_get_rate(clk);
> - if (!rate)
> - return -EINVAL;
> -
> - /* NOTE: round *down* to meet minimum timings; we count in clocks */
> - ideclk_period = 1000000000UL / rate;
> -
> - mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> -
> - irq = platform_get_irq(pdev, 0);
> - if (irq < 0) {
> - pr_err(DRV_NAME ": failed to get IRQ resource\n");
> - return irq;
> - }
> -
> - base = devm_ioremap_resource(&pdev->dev, mem);
> - if (IS_ERR(base))
> - return PTR_ERR(base);
> -
> - /* configure the Palmchip controller */
> - pata_bk3710_chipinit(base);
> -
> - /* allocate host */
> - host = ata_host_alloc(&pdev->dev, 1);
> - if (!host)
> - return -ENOMEM;
> - ap = host->ports[0];
> -
> - ap->ops = &pata_bk3710_ports_ops;
> - ap->pio_mask = ATA_PIO4;
> - ap->mwdma_mask = ATA_MWDMA2;
> - ap->udma_mask = rate < 100000000 ? ATA_UDMA4 : ATA_UDMA5;
> - ap->flags |= ATA_FLAG_SLAVE_POSS;
> -
> - ap->ioaddr.data_addr = base + BK3710_TF_OFFSET;
> - ap->ioaddr.error_addr = base + BK3710_TF_OFFSET + 1;
> - ap->ioaddr.feature_addr = base + BK3710_TF_OFFSET + 1;
> - ap->ioaddr.nsect_addr = base + BK3710_TF_OFFSET + 2;
> - ap->ioaddr.lbal_addr = base + BK3710_TF_OFFSET + 3;
> - ap->ioaddr.lbam_addr = base + BK3710_TF_OFFSET + 4;
> - ap->ioaddr.lbah_addr = base + BK3710_TF_OFFSET + 5;
> - ap->ioaddr.device_addr = base + BK3710_TF_OFFSET + 6;
> - ap->ioaddr.status_addr = base + BK3710_TF_OFFSET + 7;
> - ap->ioaddr.command_addr = base + BK3710_TF_OFFSET + 7;
> -
> - ap->ioaddr.altstatus_addr = base + BK3710_CTL_OFFSET;
> - ap->ioaddr.ctl_addr = base + BK3710_CTL_OFFSET;
> -
> - ap->ioaddr.bmdma_addr = base;
> -
> - ata_port_desc(ap, "cmd 0x%lx ctl 0x%lx",
> - (unsigned long)base + BK3710_TF_OFFSET,
> - (unsigned long)base + BK3710_CTL_OFFSET);
> -
> - /* activate */
> - return ata_host_activate(host, irq, ata_sff_interrupt, 0,
> - &pata_bk3710_sht);
> -}
> -
> -/* work with hotplug and coldplug */
> -MODULE_ALIAS("platform:palm_bk3710");
> -
> -static struct platform_driver pata_bk3710_driver = {
> - .driver = {
> - .name = "palm_bk3710",
> - },
> -};
> -
> -static int __init pata_bk3710_init(void)
> -{
> - return platform_driver_probe(&pata_bk3710_driver, pata_bk3710_probe);
> -}
> -
> -module_init(pata_bk3710_init);
> -MODULE_LICENSE("GPL v2");
--
Damien Le Moal
Western Digital Research
More information about the linux-arm-kernel
mailing list