[PATCH] ARM: dts: stm32: add sdmmc cd-gpios for STM32MP135F-DK
Alexandre TORGUE
alexandre.torgue at foss.st.com
Thu Oct 20 08:34:07 PDT 2022
Hi Yann
On 9/21/22 18:03, Yann Gautier wrote:
> On STM32MP135F-DK, the SD card detect GPIO is GPIOH4.
>
> Signed-off-by: Yann Gautier <yann.gautier at foss.st.com>
> ---
> arch/arm/boot/dts/stm32mp135f-dk.dts | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/arch/arm/boot/dts/stm32mp135f-dk.dts b/arch/arm/boot/dts/stm32mp135f-dk.dts
> index e6b8ffd332c7..52f86596ce12 100644
> --- a/arch/arm/boot/dts/stm32mp135f-dk.dts
> +++ b/arch/arm/boot/dts/stm32mp135f-dk.dts
> @@ -82,7 +82,7 @@ &sdmmc1 {
> pinctrl-0 = <&sdmmc1_b4_pins_a &sdmmc1_clk_pins_a>;
> pinctrl-1 = <&sdmmc1_b4_od_pins_a &sdmmc1_clk_pins_a>;
> pinctrl-2 = <&sdmmc1_b4_sleep_pins_a>;
> - broken-cd;
> + cd-gpios = <&gpioh 4 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>;
> disable-wp;
> st,neg-edge;
> bus-width = <4>;
Applied on stm32-next.
Thanks.
Alex
More information about the linux-arm-kernel
mailing list