[PATCH] i2c: xiic: Make sure to disable clock on .remove()

[Uwe Kleine-König]

If for whatever reasons pm_runtime_resume_and_get() failed, .remove() is
exited early, the clock isn't freed and runtime PM state isn't reset.

The right thing to do however is to free all resources that don't need
HW access after a problem with runtime PM. Also issue a warning in that
case and return 0 to suppress a less helpful warning by the driver core.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig at pengutronix.de>
---
 drivers/i2c/busses/i2c-xiic.c | 9 ++++++---
 1 file changed, 6 insertions(+), 3 deletions(-)

diff --git a/drivers/i2c/busses/i2c-xiic.c b/drivers/i2c/busses/i2c-xiic.c
index b3fe6b2aa3ca..809d6eadae2d 100644
--- a/drivers/i2c/busses/i2c-xiic.c
+++ b/drivers/i2c/busses/i2c-xiic.c
@@ -858,11 +858,14 @@ static int xiic_i2c_remove(struct platform_device *pdev)
 	/* remove adapter & data */
 	i2c_del_adapter(&i2c->adap);
 
-	ret = pm_runtime_resume_and_get(i2c->dev);
+	ret = pm_runtime_get_sync(i2c->dev);
+
 	if (ret < 0)
-		return ret;
+		dev_warn(&pdev->dev, "Failed to activate device for removal (%pe)\n",
+			 ERR_PTR(ret));
+	else
+		xiic_deinit(i2c);
 
-	xiic_deinit(i2c);
 	pm_runtime_put_sync(i2c->dev);
 	clk_disable_unprepare(i2c->clk);
 	pm_runtime_disable(&pdev->dev);

base-commit: 9abf2313adc1ca1b6180c508c25f22f9395cc780
-- 
2.37.2