[PATCH 08/10] arm64: dts: ti: k3-am62: Enable MCAN nodes at the board level

[Andrew Davis]

MCAN nodes defined in the top-level AM62x SoC dtsi files are incomplete
and will not be functional unless they are extended with pinmux
information.

As the pinmux is only known at the board integration level, these
nodes should only be enabled when provided with this information.

Disable the MCAN nodes in the dtsi files and only enable the ones that
are actually pinned out on a given board.

Signed-off-by: Andrew Davis <afd at ti.com>
---
 arch/arm64/boot/dts/ti/k3-am62-main.dtsi | 1 +
 arch/arm64/boot/dts/ti/k3-am625-sk.dts   | 4 ----
 2 files changed, 1 insertion(+), 4 deletions(-)

diff --git a/arch/arm64/boot/dts/ti/k3-am62-main.dtsi b/arch/arm64/boot/dts/ti/k3-am62-main.dtsi
index 5169f77cd37a..43eebff429ab 100644
--- a/arch/arm64/boot/dts/ti/k3-am62-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am62-main.dtsi
@@ -607,6 +607,7 @@ main_mcan0: can at 20701000 {
 			     <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>;
 		interrupt-names = "int0", "int1";
 		bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>;
+		status = "disabled";
 	};
 
 	epwm0: pwm at 23000000 {
diff --git a/arch/arm64/boot/dts/ti/k3-am625-sk.dts b/arch/arm64/boot/dts/ti/k3-am625-sk.dts
index b8938eb9c55a..b6d53366ec50 100644
--- a/arch/arm64/boot/dts/ti/k3-am625-sk.dts
+++ b/arch/arm64/boot/dts/ti/k3-am625-sk.dts
@@ -452,7 +452,3 @@ partition at 3fc0000 {
 		};
 	};
 };
-
-&main_mcan0 {
-	status = "disabled";
-};
-- 
2.37.3