[Patch v3 05/15] Documention: v4l: Documentation for VP9 CIDs.

Tue Oct 18 08:05:44 PDT 2022

Hi,

thanks for your patch, very minor comment below.

Le mardi 11 octobre 2022 à 17:55 +0530, aakarsh jain a écrit :
> From: Smitha T Murthy <smitha.t at samsung.com>
> 
> Adds V4l2 controls for VP9 encoder documention.
> 
> Cc: linux-fsd at tesla.com
> Signed-off-by: Smitha T Murthy <smitha.t at samsung.com>
> Signed-off-by: Aakarsh Jain <aakarsh.jain at samsung.com>
> ---
>  .../media/v4l/ext-ctrls-codec.rst             | 167 ++++++++++++++++++
>  1 file changed, 167 insertions(+)
> 
> diff --git a/Documentation/userspace-api/media/v4l/ext-ctrls-codec.rst b/Documentation/userspace-api/media/v4l/ext-ctrls-codec.rst
> index 2a165ae063fb..2277d83a7cf0 100644
> --- a/Documentation/userspace-api/media/v4l/ext-ctrls-codec.rst
> +++ b/Documentation/userspace-api/media/v4l/ext-ctrls-codec.rst
> @@ -2187,6 +2187,16 @@ enum v4l2_mpeg_video_vp8_profile -
>      * - ``V4L2_MPEG_VIDEO_VP8_PROFILE_3``
>        - Profile 3
>  
> +VP9 Control Reference
> +---------------------
> +
> +The VP9 controls include controls for encoding parameters of VP9 video
> +codec.
> +
> +.. _vp9-control-id:
> +
> +VP9 Control IDs
> +
>  .. _v4l2-mpeg-video-vp9-profile:
>  
>  ``V4L2_CID_MPEG_VIDEO_VP9_PROFILE``
> @@ -2253,6 +2263,163 @@ enum v4l2_mpeg_video_vp9_level -
>      * - ``V4L2_MPEG_VIDEO_VP9_LEVEL_6_2``
>        - Level 6.2
>  
> +``V4L2_CID_CODEC_VP9_I_FRAME_QP``
> +    Quantization parameter for an I frame for VP9. Valid range: from 1 to 255.
> +
> +``V4L2_CID_CODEC_VP9_P_FRAME_QP``
> +    Quantization parameter for an P frame for VP9. Valid range: from 1 to 255.
> +
> +``V4L2_CID_CODEC_VP9_MAX_QP``
> +    Maximum quantization parameter for VP9. Valid range: from 1 to 255.
> +    Recommended range for MFC is from 230 to 255.

We don't usually want every single HW to be documented in the generic part of
the documentation. The range supported by the HW should be found at run-time I
suppose, by querying the control. Would that work for you to remove the MFC
specifics here and in other controls ?

> +
> +``V4L2_CID_CODEC_VP9_MIN_QP``
> +    Minimum quantization parameter for VP9. Valid range: from 1 to 255.
> +    Recommended range for MFC is from 1 to 24.
> +
> +``V4L2_CID_CODEC_VP9_RC_FRAME_RATE``
> +    Indicates the number of evenly spaced subintervals, called ticks, within
> +    one second. This is a 16 bit unsigned integer and has a maximum value up to
> +    0xffff and a minimum value of 1.
> +
> +``V4L2_CID_CODEC_VP9_GF_REFRESH_PERIOD``
> +    Indicates the refresh period of the golden frame for VP9 encoder.
> +
> +.. _v4l2-vp9-golden-frame-sel:
> +
> +``V4L2_CID_CODEC_VP9_GOLDEN_FRAMESEL``
> +    (enum)
> +
> +enum v4l2_mpeg_vp9_golden_framesel -
> +    Selects the golden frame for encoding. Valid when NUM_OF_REF is 2.
> +    Possible values are:
> +
> +.. raw:: latex
> +
> +    \footnotesize
> +
> +.. tabularcolumns:: |p{9.0cm}|p{8.0cm}|
> +
> +.. flat-table::
> +    :header-rows:  0
> +    :stub-columns: 0
> +
> +    * - ``V4L2_CID_CODEC_VP9_GOLDEN_FRAME_USE_PREV``
> +      - Use the (n-2)th frame as a golden frame, current frame index being
> +        'n'.
> +    * - ``V4L2_CID_CODEC_VP9_GOLDEN_FRAME_USE_REF_PERIOD``
> +      - Use the previous specific frame indicated by
> +        ``V4L2_CID_CODEC_VP9_GF_REFRESH_PERIOD`` as a
> +        golden frame.
> +
> +.. raw:: latex
> +
> +    \normalsize
> +
> +
> +``V4L2_CID_CODEC_VP9_HIERARCHY_QP_ENABLE``
> +    Allows host to specify the quantization parameter values for each
> +    temporal layer through HIERARCHICAL_QP_LAYER. This is valid only
> +    if HIERARCHICAL_CODING_LAYER is greater than 1. Setting the control
> +    value to 1 enables setting of the QP values for the layers.
> +
> +.. _v4l2-vp9-ref-number-of-pframes:
> +
> +``V4L2_CID_CODEC_VP9_REF_NUMBER_FOR_PFRAMES``
> +    (enum)
> +
> +enum v4l2_mpeg_vp9_ref_num_for_pframes -
> +    Number of reference pictures for encoding P frames.
> +
> +.. raw:: latex
> +
> +    \footnotesize
> +
> +.. tabularcolumns:: |p{9.0cm}|p{8.0cm}|
> +
> +.. flat-table::
> +    :header-rows:  0
> +    :stub-columns: 0
> +
> +    * - ``V4L2_CID_CODEC_VP9_1_REF_PFRAME``
> +      - Indicates one reference frame, last encoded frame will be searched.
> +    * - ``V4L2_CID_CODEC_VP9_GOLDEN_FRAME_USE_REF_PERIOD``
> +      - Indicates 2 reference frames, last encoded frame and golden frame
> +        will be searched.
> +
> +.. raw:: latex
> +
> +    \normalsize
> +
> +
> +``V4L2_CID_CODEC_VP9_HIERARCHICAL_CODING_LAYER``
> +    Indicates the number of hierarchial coding layer.
> +    In normal encoding (non-hierarchial coding), it should be zero.
> +    VP9 has upto 3 layer of encoder.
> +
> +``V4L2_CID_CODEC_VP9_HIERARCHY_RC_ENABLE``
> +    Indicates enabling of bit rate for hierarchical coding layers VP9 encoder.
> +
> +``V4L2_CID_CODEC_VP9_HIER_CODING_L0_BR``
> +    Indicates bit rate for hierarchical coding layer 0 for VP9 encoder.
> +
> +``V4L2_CID_CODEC_VP9_HIER_CODING_L1_BR``
> +    Indicates bit rate for hierarchical coding layer 1 for VP9 encoder.
> +
> +``V4L2_CID_CODEC_VP9_HIER_CODING_L2_BR``
> +    Indicates bit rate for hierarchical coding layer 2 for VP9 encoder.
> +
> +``V4L2_CID_CODEC_VP9_HIER_CODING_L0_QP``
> +    Indicates quantization parameter for hierarchical coding layer 0.
> +    Valid range: [V4L2_CID_CODEC_VP9_MIN_QP,
> +    V4L2_CID_CODEC_VP9_MAX_QP].
> +
> +``V4L2_CID_CODEC_VP9_HIER_CODING_L1_QP``
> +    Indicates quantization parameter for hierarchical coding layer 1.
> +    Valid range: [V4L2_CID_CODEC_VP9_MIN_QP,
> +    V4L2_CID_CODEC_VP9_MAX_QP].
> +
> +``V4L2_CID_CODEC_VP9_HIER_CODING_L2_QP``
> +    Indicates quantization parameter for hierarchical coding layer 2.
> +    Valid range: [V4L2_CID_CODEC_VP9_MIN_QP,
> +    V4L2_CID_CODEC_VP9_MAX_QP].
> +
> +.. _v4l2-vp9-max-partition-depth:
> +
> +``V4L2_CID_CODEC_VP9_MAX_PARTITION_DEPTH``
> +    (enum)
> +
> +enum v4l2_mpeg_vp9_num_partitions -
> +    Indicate maximum coding unit depth.
> +
> +.. raw:: latex
> +
> +    \footnotesize
> +
> +.. tabularcolumns:: |p{9.0cm}|p{8.0cm}|
> +
> +.. flat-table::
> +    :header-rows:  0
> +    :stub-columns: 0
> +
> +    * - ``V4L2_CID_CODEC_VP9_0_PARTITION``
> +      - No coding unit partition depth.
> +    * - ``V4L2_CID_CODEC_VP9_1_PARTITION``
> +      - Allows one coding unit partition depth.
> +
> +.. raw:: latex
> +
> +    \normalsize
> +
> +
> +``V4L2_CID_CODEC_VP9_DISABLE_INTRA_PU_SPLIT``
> +    Zero indicates enable intra NxN PU split.
> +    One indicates disable intra NxN PU split.
> +
> +``V4L2_CID_CODEC_VP9_DISABLE_IVF_HEADER``
> +    Indicates IVF header generation. Zero indicates enable IVF format.
> +    One indicates disable IVF format.
> +
>  
>  High Efficiency Video Coding (HEVC/H.265) Control Reference
>  ===========================================================