[PATCH v2 1/3] dt-bindings: phy: ti: phy-gmii-sel: Add bindings for J721e

[Rob Herring]

On Tue, 18 Oct 2022 14:13:31 +0530, Siddharth Vadapalli wrote:
> TI's J721e SoC supports additional PHY modes like QSGMII and SGMII
> that are not supported on earlier SoCs. Add a compatible for it.
> 
> Extend ti,qsgmii-main-ports property to support selection of upto
> two main ports at once across the two QSGMII interfaces.
> 
> Signed-off-by: Siddharth Vadapalli <s-vadapalli at ti.com>
> ---
>  .../bindings/phy/ti,phy-gmii-sel.yaml         | 48 +++++++++++++++----
>  1 file changed, 40 insertions(+), 8 deletions(-)
> 

My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check'
on your patch (DT_CHECKER_FLAGS is new in v5.13):

yamllint warnings/errors:
./Documentation/devicetree/bindings/phy/ti,phy-gmii-sel.yaml:75:12: [error] syntax error: mapping values are not allowed here (syntax)

dtschema/dtc warnings/errors:
make[1]: *** Deleting file 'Documentation/devicetree/bindings/phy/ti,phy-gmii-sel.example.dts'
Documentation/devicetree/bindings/phy/ti,phy-gmii-sel.yaml:75:12: mapping values are not allowed in this context
make[1]: *** [Documentation/devicetree/bindings/Makefile:26: Documentation/devicetree/bindings/phy/ti,phy-gmii-sel.example.dts] Error 1
make[1]: *** Waiting for unfinished jobs....
./Documentation/devicetree/bindings/phy/ti,phy-gmii-sel.yaml:75:12: mapping values are not allowed in this context
./Documentation/devicetree/bindings/mfd/ti,j721e-system-controller.yaml: Unable to find schema file matching $id: http://devicetree.org/schemas/phy/ti,phy-gmii-sel.yaml
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/phy/ti,phy-gmii-sel.yaml: ignoring, error parsing file
make: *** [Makefile:1492: dt_binding_check] Error 2

doc reference errors (make refcheckdocs):

See https://patchwork.ozlabs.org/patch/

This check can fail if there are any dependencies. The base for a patch
series is generally the most recent rc1.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit.