[PATCH v2 2/4] usb: chipidea: usbmisc_imx: Fix setting i.MX6SX wakeup source

[Sascha Hauer]

MX6SX_USB_VBUS_WAKEUP_SOURCE are two bits containing an enum value,
so when read/modify/write that we have to clear both bits bits before
setting the desired bits. The clearing of the bits was forgotten, add
it.

Signed-off-by: Sascha Hauer <s.hauer at pengutronix.de>
Reviewed-by: Xu Yang <xu.yang_2 at nxp.com>
Link: https://lore.kernel.org/r/20221011082924.884123-3-s.hauer@pengutronix.de
Signed-off-by: Sascha Hauer <s.hauer at pengutronix.de>
---
 drivers/usb/chipidea/usbmisc_imx.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/usb/chipidea/usbmisc_imx.c b/drivers/usb/chipidea/usbmisc_imx.c
index 8f805aa9c383c..e1b4b7f9b3f31 100644
--- a/drivers/usb/chipidea/usbmisc_imx.c
+++ b/drivers/usb/chipidea/usbmisc_imx.c
@@ -551,6 +551,7 @@ static int usbmisc_imx6sx_init(struct imx_usbmisc_data *data)
 		spin_lock_irqsave(&usbmisc->lock, flags);
 		/* Set vbus wakeup source as bvalid */
 		val = readl(reg);
+		val &= ~MX6SX_USB_VBUS_WAKEUP_SOURCE(3);
 		writel(val | MX6SX_USB_VBUS_WAKEUP_SOURCE_BVALID, reg);
 		/*
 		 * Disable dp/dm wakeup in device mode when vbus is
-- 
2.30.2