[PATCH v1 6/6] spi: pxa2xx: Switch from PM ifdeffery to pm_ptr()

Jonathan Cameron Jonathan.Cameron at huawei.com
Tue Oct 18 02:14:52 PDT 2022


On Mon, 17 Oct 2022 20:12:43 +0300
Andy Shevchenko <andriy.shevchenko at linux.intel.com> wrote:

> Cleaning up the driver to use pm_ptr() macro instead of ifdeffery
> that makes it simpler and allows the compiler to remove those functions
> if built without CONFIG_PM and CONFIG_PM_SLEEP support.
> 
> Signed-off-by: Andy Shevchenko <andriy.shevchenko at linux.intel.com>
FWIW I like these - so drive by review.

Reviewed-by: Jonathan Cameron <Jonathan.Cameron at huawei.com>

I think you could change the handling of !pm_runtime_suspended()
to use pm_runtime_force_suspend() and equivalent for resume path.
I haven't checked that closely though - just looks like a typical
usecase for those functions that are hardened against some of
the corner cases that can occur in interactions between different
forms of pm.


> ---
>  drivers/spi/spi-pxa2xx.c | 11 +++--------
>  1 file changed, 3 insertions(+), 8 deletions(-)
> 
> diff --git a/drivers/spi/spi-pxa2xx.c b/drivers/spi/spi-pxa2xx.c
> index 76046612466d..60cab241200b 100644
> --- a/drivers/spi/spi-pxa2xx.c
> +++ b/drivers/spi/spi-pxa2xx.c
> @@ -1680,7 +1680,6 @@ static int pxa2xx_spi_remove(struct platform_device *pdev)
>  	return 0;
>  }
>  
> -#ifdef CONFIG_PM_SLEEP
>  static int pxa2xx_spi_suspend(struct device *dev)
>  {
>  	struct driver_data *drv_data = dev_get_drvdata(dev);
> @@ -1715,9 +1714,7 @@ static int pxa2xx_spi_resume(struct device *dev)
>  	/* Start the queue running */
>  	return spi_controller_resume(drv_data->controller);
>  }
> -#endif
>  
> -#ifdef CONFIG_PM
>  static int pxa2xx_spi_runtime_suspend(struct device *dev)
>  {
>  	struct driver_data *drv_data = dev_get_drvdata(dev);
> @@ -1732,12 +1729,10 @@ static int pxa2xx_spi_runtime_resume(struct device *dev)
>  
>  	return clk_prepare_enable(drv_data->ssp->clk);
>  }
> -#endif
>  
>  static const struct dev_pm_ops pxa2xx_spi_pm_ops = {
> -	SET_SYSTEM_SLEEP_PM_OPS(pxa2xx_spi_suspend, pxa2xx_spi_resume)
> -	SET_RUNTIME_PM_OPS(pxa2xx_spi_runtime_suspend,
> -			   pxa2xx_spi_runtime_resume, NULL)
> +	SYSTEM_SLEEP_PM_OPS(pxa2xx_spi_suspend, pxa2xx_spi_resume)
> +	RUNTIME_PM_OPS(pxa2xx_spi_runtime_suspend, pxa2xx_spi_runtime_resume, NULL)
>  };
>  
>  #ifdef CONFIG_ACPI
> @@ -1762,7 +1757,7 @@ MODULE_DEVICE_TABLE(of, pxa2xx_spi_of_match);
>  static struct platform_driver driver = {
>  	.driver = {
>  		.name	= "pxa2xx-spi",
> -		.pm	= &pxa2xx_spi_pm_ops,
> +		.pm	= pm_ptr(&pxa2xx_spi_pm_ops),
>  		.acpi_match_table = ACPI_PTR(pxa2xx_spi_acpi_match),
>  		.of_match_table = of_match_ptr(pxa2xx_spi_of_match),
>  	},




More information about the linux-arm-kernel mailing list