[PATCH 0/2] pinctrl: pinctrl-zynqmp: Revert output-enable and bias-high-impedance support

[Michal Simek]

On 10/17/22 14:00, Sai Krishna Potthuri wrote:
> Having support for output-enable and bias-high-impedance properties
> causing system hang with older Xilinx ZynqMP Platform Management Firmware
> because there is missing autodetection feature.
> When this feature is implemented, support for these two properties should
> bring back.
> 
> Sai Krishna Potthuri (2):
>    Revert "pinctrl: pinctrl-zynqmp: Add support for output-enable and
>      bias-high-impedance"
>    Revert "dt-bindings: pinctrl-zynqmp: Add output-enable configuration"
> 
>   .../devicetree/bindings/pinctrl/xlnx,zynqmp-pinctrl.yaml | 4 ----
>   drivers/pinctrl/pinctrl-zynqmp.c                         | 9 ---------
>   2 files changed, 13 deletions(-)
> 

You should CC stable to get it to stable kernels too.

Thanks,
Michal