[RFC RESEND PATCH 0/2] RZ/G2UL separate out SoC specific parts

[Prabhakar]

From: Lad Prabhakar <prabhakar.mahadev-lad.rj at bp.renesas.com>

Hi All,

This patch series aims to split up the RZ/G2UL SoC DTSI into common parts
so that this can be shared with the RZ/Five SoC.

Implementation is based on the discussion [0] where I have used option#2.

The Renesas RZ/G2UL (ARM64) and RZ/Five (RISC-V) have almost the same
identical blocks to avoid duplication a base SoC dtsi (r9a07g043.dtsi) is
created which will be used by the RZ/G2UL (r9a07g043u.dtsi) and RZ/Five
(r9a07g043F.dtsi)

Sending this as an RFC to get some feedback.

r9a07g043f.dtsi will look something like below:

#include <dt-bindings/interrupt-controller/irq.h>

#define SOC_PERIPHERAL_IRQ_NUMBER(nr)	(nr + 32)
#define SOC_PERIPHERAL_IRQ(nr, na)	SOC_PERIPHERAL_IRQ_NUMBER(nr) na

#include <arm64/renesas/r9a07g043.dtsi>

/ {
   ...
   ...   
};

Although patch#2 can be merged into patch#1 just wanted to keep them separated
for easier review.

RFC-> RESEND RFC
* Patches rebased on [1]

RFC: [2]

[0] https://lore.kernel.org/linux-arm-kernel/Yyt8s5+pyoysVNeC@spud/T/
[1] https://patchwork.kernel.org/project/linux-renesas-soc/cover/20221009230044.10961-1-prabhakar.mahadev-lad.rj@bp.renesas.com/
[2] https://patchwork.kernel.org/project/linux-renesas-soc/cover/20220929172356.301342-1-prabhakar.mahadev-lad.rj@bp.renesas.com/

Cheers,
Prabhakar

Lad Prabhakar (2):
  arm64: dts: renesas: r9a07g043: Introduce SOC_PERIPHERAL_IRQ() macro
    to specify interrupt property
  arm64: dts: renesas: r9a07g043: Split out RZ/G2UL SoC specific parts

 arch/arm64/boot/dts/renesas/r9a07g043.dtsi    | 347 ++++++++----------
 arch/arm64/boot/dts/renesas/r9a07g043u.dtsi   |  72 ++++
 .../boot/dts/renesas/r9a07g043u11-smarc.dts   |   2 +-
 3 files changed, 220 insertions(+), 201 deletions(-)
 create mode 100644 arch/arm64/boot/dts/renesas/r9a07g043u.dtsi

-- 
2.25.1