[PATCH 1/6] dt-bindings: usb: ci-hdrc-usb2: convert to yaml
Peng Fan
peng.fan at nxp.com
Thu Oct 13 20:31:19 PDT 2022
> Subject: Re: [PATCH 1/6] dt-bindings: usb: ci-hdrc-usb2: convert to yaml
>
> On 10/10/2022 06:18, Peng Fan (OSS) wrote:
> > From: Peng Fan <peng.fan at nxp.com>
> >
> > Convert the binding to yaml format
> >
> > Signed-off-by: Peng Fan <peng.fan at nxp.com>
> > ---
> > .../devicetree/bindings/usb/ci-hdrc-usb2.txt | 158 ---------
> > .../devicetree/bindings/usb/ci-hdrc-usb2.yaml | 306 ++++++++++++++++++
> > 2 files changed, 306 insertions(+), 158 deletions(-) delete mode
> > 100644 Documentation/devicetree/bindings/usb/ci-hdrc-usb2.txt
> > create mode 100644
> > Documentation/devicetree/bindings/usb/ci-hdrc-usb2.yaml
> >
> > diff --git a/Documentation/devicetree/bindings/usb/ci-hdrc-usb2.txt
> > b/Documentation/devicetree/bindings/usb/ci-hdrc-usb2.txt
> > deleted file mode 100644
> > index ba51fb1252b9..000000000000
> > --- a/Documentation/devicetree/bindings/usb/ci-hdrc-usb2.txt
> > +++ /dev/null
> > @@ -1,158 +0,0 @@
> > -* USB2 ChipIdea USB controller for ci13xxx
> > -
> > -Required properties:
> > -- compatible: should be one of:
> > - "fsl,imx23-usb"
> > - "fsl,imx27-usb"
> > - "fsl,imx28-usb"
> > - "fsl,imx6q-usb"
> > - "fsl,imx6sl-usb"
> > - "fsl,imx6sx-usb"
> > - "fsl,imx6ul-usb"
> > - "fsl,imx7d-usb"
> > - "fsl,imx7ulp-usb"
> > - "lsi,zevio-usb"
> > - "qcom,ci-hdrc"
> > - "chipidea,usb2"
> > - "xlnx,zynq-usb-2.20a"
> > - "nvidia,tegra20-udc"
> > - "nvidia,tegra30-udc"
> > - "nvidia,tegra114-udc"
> > - "nvidia,tegra124-udc"
> > -- reg: base address and length of the registers
> > -- interrupts: interrupt for the USB controller
> > -
> > -Recommended properies:
> > -- phy_type: the type of the phy connected to the core. Should be one
> > - of "utmi", "utmi_wide", "ulpi", "serial" or "hsic". Without this
> > - property the PORTSC register won't be touched.
> > -- dr_mode: One of "host", "peripheral" or "otg". Defaults to "otg"
> > -
> > -Deprecated properties:
> > -- usb-phy: phandle for the PHY device. Use "phys" instead.
> > -- fsl,usbphy: phandle of usb phy that connects to the port. Use "phys"
> instead.
> > -
> > -Optional properties:
> > -- clocks: reference to the USB clock
> > -- phys: reference to the USB PHY
> > -- phy-names: should be "usb-phy"
> > -- vbus-supply: reference to the VBUS regulator
> > -- maximum-speed: limit the maximum connection speed to "full-speed".
> > -- tpl-support: TPL (Targeted Peripheral List) feature for targeted
> > hosts
> > -- itc-setting: interrupt threshold control register control, the
> > setting
> > - should be aligned with ITC bits at register USBCMD.
> > -- ahb-burst-config: it is vendor dependent, the required value should
> > be
> > - aligned with AHBBRST at SBUSCFG, the range is from 0x0 to 0x7. This
> > - property is used to change AHB burst configuration, check the
> > chipidea
> > - spec for meaning of each value. If this property is not existed, it
> > - will use the reset value.
> > -- tx-burst-size-dword: it is vendor dependent, the tx burst size in
> > dword
> > - (4 bytes), This register represents the maximum length of a the
> > burst
> > - in 32-bit words while moving data from system memory to the USB
> > - bus, the value of this property will only take effect if property
> > - "ahb-burst-config" is set to 0, if this property is missing the
> > reset
> > - default of the hardware implementation will be used.
> > -- rx-burst-size-dword: it is vendor dependent, the rx burst size in
> > dword
> > - (4 bytes), This register represents the maximum length of a the
> > burst
> > - in 32-bit words while moving data from the USB bus to system
> > memory,
> > - the value of this property will only take effect if property
> > - "ahb-burst-config" is set to 0, if this property is missing the
> > reset
> > - default of the hardware implementation will be used.
> > -- extcon: phandles to external connector devices. First phandle
> > should point to
> > - external connector, which provide "USB" cable events, the second
> > should point
> > - to external connector device, which provide "USB-HOST" cable
> > events. If one
> > - of the external connector devices is not required, empty <0>
> > phandle should
> > - be specified.
> > -- phy-clkgate-delay-us: the delay time (us) between putting the PHY
> > into
> > - low power mode and gating the PHY clock.
> > -- non-zero-ttctrl-ttha: after setting this property, the value of
> > register
> > - ttctrl.ttha will be 0x7f; if not, the value will be 0x0, this is
> > the default
> > - value. It needs to be very carefully for setting this property, it
> > is
> > - recommended that consult with your IC engineer before setting this
> value.
> > - On the most of chipidea platforms, the "usage_tt" flag at RTL is 0,
> > so this
> > - property only affects siTD.
> > - If this property is not set, the max packet size is 1023 bytes, and
> > if
> > - the total of packet size for pervious transactions are more than
> > 256 bytes,
> > - it can't accept any transactions within this frame. The use case is
> > single
> > - transaction, but higher frame rate.
> > - If this property is set, the max packet size is 188 bytes, it can
> > handle
> > - more transactions than above case, it can accept transactions until
> > it
> > - considers the left room size within frame is less than 188 bytes,
> > software
> > - needs to make sure it does not send more than 90%
> > - maximum_periodic_data_per_frame. The use case is multiple
> > transactions, but
> > - less frame rate.
> > -- mux-controls: The mux control for toggling host/device output of
> > this
> > - controller. It's expected that a mux state of 0 indicates device
> > mode and a
> > - mux state of 1 indicates host mode.
> > -- mux-control-names: Shall be "usb_switch" if mux-controls is specified.
> > -- pinctrl-names: Names for optional pin modes in "default", "host",
> "device".
> > - In case of HSIC-mode, "idle" and "active" pin modes are mandatory.
> > In this
> > - case, the "idle" state needs to pull down the data and strobe pin
> > - and the "active" state needs to pull up the strobe pin.
> > -- pinctrl-n: alternate pin modes
> > -
> > -i.mx specific properties
> > -- fsl,usbmisc: phandler of non-core register device, with one
> > - argument that indicate usb controller index
> > -- disable-over-current: disable over current detect
> > -- over-current-active-low: over current signal polarity is active low.
> > -- over-current-active-high: over current signal polarity is active high.
> > - It's recommended to specify the over current polarity.
> > -- power-active-high: power signal polarity is active high
> > -- external-vbus-divider: enables off-chip resistor divider for Vbus
> > -- samsung,picophy-pre-emp-curr-control: HS Transmitter Pre-Emphasis
> > Current
> > - Control. This signal controls the amount of current sourced to the
> > - USB_OTG*_DP and USB_OTG*_DN pins after a J-to-K or K-to-J transition.
> > - The range is from 0x0 to 0x3, the default value is 0x1.
> > - Details can refer to TXPREEMPAMPTUNE0 bits of USBNC_n_PHY_CFG1.
> > -- samsung,picophy-dc-vol-level-adjust: HS DC Voltage Level Adjustment.
> > - Adjust the high-speed transmitter DC level voltage.
> > - The range is from 0x0 to 0xf, the default value is 0x3.
> > - Details can refer to TXVREFTUNE0 bits of USBNC_n_PHY_CFG1.
> > -
> > -Example:
> > -
> > - usb at f7ed0000 {
> > - compatible = "chipidea,usb2";
> > - reg = <0xf7ed0000 0x10000>;
> > - interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
> > - clocks = <&chip CLKID_USB0>;
> > - phys = <&usb_phy0>;
> > - phy-names = "usb-phy";
> > - vbus-supply = <®_usb0_vbus>;
> > - itc-setting = <0x4>; /* 4 micro-frames */
> > - /* Incremental burst of unspecified length */
> > - ahb-burst-config = <0x0>;
> > - tx-burst-size-dword = <0x10>; /* 64 bytes */
> > - rx-burst-size-dword = <0x10>;
> > - extcon = <0>, <&usb_id>;
> > - phy-clkgate-delay-us = <400>;
> > - mux-controls = <&usb_switch>;
> > - mux-control-names = "usb_switch";
> > - };
> > -
> > -Example for HSIC:
> > -
> > - usb at 2184400 {
> > - compatible = "fsl,imx6q-usb", "fsl,imx27-usb";
> > - reg = <0x02184400 0x200>;
> > - interrupts = <0 41 IRQ_TYPE_LEVEL_HIGH>;
> > - clocks = <&clks IMX6QDL_CLK_USBOH3>;
> > - fsl,usbphy = <&usbphynop1>;
> > - fsl,usbmisc = <&usbmisc 2>;
> > - phy_type = "hsic";
> > - dr_mode = "host";
> > - ahb-burst-config = <0x0>;
> > - tx-burst-size-dword = <0x10>;
> > - rx-burst-size-dword = <0x10>;
> > - pinctrl-names = "idle", "active";
> > - pinctrl-0 = <&pinctrl_usbh2_idle>;
> > - pinctrl-1 = <&pinctrl_usbh2_active>;
> > - #address-cells = <1>;
> > - #size-cells = <0>;
> > -
> > - usbnet: ethernet at 1 {
> > - compatible = "usb424,9730";
> > - reg = <1>;
> > - };
> > - };
> > diff --git a/Documentation/devicetree/bindings/usb/ci-hdrc-usb2.yaml
> > b/Documentation/devicetree/bindings/usb/ci-hdrc-usb2.yaml
> > new file mode 100644
> > index 000000000000..1c10691c45f2
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/usb/ci-hdrc-usb2.yaml
> > @@ -0,0 +1,306 @@
> > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) %YAML 1.2
> > +---
> > +$id:
> >
> +https://eur01.safelinks.protection.outlook.com/?url=http%3A%2F%2Fdevi
> > +cetree.org%2Fschemas%2Fusb%2Fci-hdrc-
> usb2.yaml%23&data=05%7C01%7C
> >
> +peng.fan%40nxp.com%7C730bfc13b48e44f69cff08daac550e45%7C686ea1
> d3bc2b4
> >
> +c6fa92cd99c5c301635%7C0%7C0%7C638011778555556152%7CUnknown%
> 7CTWFpbGZs
> >
> +b3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6
> Mn0%3
> >
> +D%7C3000%7C%7C%7C&sdata=NkNmk8iE0PJIBf4nd4%2FzVeJc7BvQZ
> bKgSDPMeqX
> > +RBzE%3D&reserved=0
> > +$schema:
> >
> +https://eur01.safelinks.protection.outlook.com/?url=http%3A%2F%2Fdevi
> > +cetree.org%2Fmeta-
> schemas%2Fcore.yaml%23&data=05%7C01%7Cpeng.fan%
> >
> +40nxp.com%7C730bfc13b48e44f69cff08daac550e45%7C686ea1d3bc2b4c6f
> a92cd9
> >
> +9c5c301635%7C0%7C0%7C638011778555712848%7CUnknown%7CTWFpb
> GZsb3d8eyJWI
> >
> +joiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7
> C3000%
> >
> +7C%7C%7C&sdata=PRa5a5NBGffcTadY6hzRM%2BZbyUSGLfWKlGkKyu
> xjnJI%3D&a
> > +mp;reserved=0
> > +
> > +title: USB2 ChipIdea USB controller for ci13xxx Binding
> > +
> > +maintainers:
> > + - Greg Kroah-Hartman <gregkh at linuxfoundation.org>
> > +
> > +properties:
> > + compatible:
> > + oneOf:
> > + - enum:
> > + - chipidea,usb2
> > + - lsi,zevio-usb
> > + - nvidia,tegra20-udc
> > + - nvidia,tegra30-udc
> > + - nvidia,tegra114-udc
> > + - nvidia,tegra124-udc
> > + - qcom,ci-hdrc
> > + - items:
> > + - enum:
> > + - fsl,imx23-usb
> > + - fsl,imx25-usb
> > + - fsl,imx28-usb
> > + - fsl,imx6q-usb
> > + - fsl,imx6sl-usb
> > + - fsl,imx6sx-usb
> > + - fsl,imx6ul-usb
> > + - fsl,imx7d-usb
> > + - const: fsl,imx27-usb
> > + - items:
> > + - const: fsl,imx7ulp-usb
> > + - const: fsl,imx6ul-usb
> > + - items:
> > + - const: lsi,zevio-usb
>
> You already have this in first enum.
>
> > + - items:
> > + - const: xlnx,zynq-usb-2.20a
> > + - const: chipidea,usb2
> > + reg:
> > + maxItems: 1
> > +
> > + interrupts:
> > + maxItems: 1
> > +
>
> Your patches have several white-space issues.
>
> Don't send patches which fail checkpatch.
>
> > + clocks:
> > + maxItems: 2
> > +
> > + itc-setting:
> > + description:
> > + interrupt threshold control register control, the setting should be
> > + aligned with ITC bits at register USBCMD.
> > + $ref: /schemas/types.yaml#/definitions/uint32
> > +
> > + ahb-burst-config:
> > + description:
> > + it is vendor dependent, the required value should be aligned with
> > + AHBBRST at SBUSCFG, the range is from 0x0 to 0x7. This property is
> > + used to change AHB burst configuration, check the chipidea spec for
> > + meaning of each value. If this property is not existed, it will use
> > + the reset value.
> > + $ref: /schemas/types.yaml#/definitions/uint32
> > + minimum: 0x0
> > + maximum: 0x7
> > +
> > + tx-burst-size-dword:
> > + description:
> > + it is vendor dependent, the tx burst size in dword (4 bytes), This
> > + register represents the maximum length of a the burst in 32-bit
> > + words while moving data from system memory to the USB bus, the
> value
> > + of this property will only take effect if property "ahb-burst-config"
> > + is set to 0, if this property is missing the reset default of the
> > + hardware implementation will be used.
> > + $ref: /schemas/types.yaml#/definitions/uint32
> > +
> > + rx-burst-size-dword:
> > + description:
> > + it is vendor dependent, the rx burst size in dword (4 bytes), This
> > + register represents the maximum length of a the burst in 32-bit words
> > + while moving data from the USB bus to system memory, the value of
> > + this property will only take effect if property "ahb-burst-config"
> > + is set to 0, if this property is missing the reset default of the
> > + hardware implementation will be used.
> > + $ref: /schemas/types.yaml#/definitions/uint32
> > +
> > + extcon:
> > + description: |
> > + Phandles to external connector devices. First phandle should point
> > + to external connector, which provide "USB" cable events, the second
> > + should point to external connector device, which provide "USB-HOST"
> > + cable events. If one of the external connector devices is not
> > + required, empty <0> phandle should be specified.
> > +
> > + phy-clkgate-delay-us:
> > + description: |
> > + The delay time (us) between putting the PHY into low power mode
> and
> > + gating the PHY clock.
> > +
> > + non-zero-ttctrl-ttha:
> > + description: |
> > + After setting this property, the value of register ttctrl.ttha
> > + will be 0x7f; if not, the value will be 0x0, this is the default
> > + value. It needs to be very carefully for setting this property, it
> > + is recommended that consult with your IC engineer before setting
> > + this value. On the most of chipidea platforms, the "usage_tt" flag
> > + at RTL is 0, so this property only affects siTD.
> > +
> > + If this property is not set, the max packet size is 1023 bytes, and
> > + if the total of packet size for pervious transactions are more than
> > + 256 bytes, it can't accept any transactions within this frame. The
> > + use case is single transaction, but higher frame rate.
> > +
> > + If this property is set, the max packet size is 188 bytes, it can
> > + handle more transactions than above case, it can accept transactions
> > + until it considers the left room size within frame is less than 188
> > + bytes, software needs to make sure it does not send more than 90%
> > + maximum_periodic_data_per_frame. The use case is multiple
> > + transactions, but less frame rate.
> > +
> > + mux-controls:
> > + description: |
> > + The mux control for toggling host/device output of this controller.
> > + It's expected that a mux state of 0 indicates device mode and a mux
> > + state of 1 indicates host mode.
> > +
> > + mux-control-names:
> > + description: Shall be "usb_switch" if mux-controls is specified.
>
> Just define the item here.
>
> > +
> > + pinctrl-names:
> > + description: |
> > + Names for optional pin modes in "default", "host", "device".
> > + In case of HSIC-mode, "idle" and "active" pin modes are mandatory.
> > + In this case, the "idle" state needs to pull down the data and
> > + strobe pin and the "active" state needs to pull up the strobe pin.
>
> Describe the items. Otherwise this does not make much sense, because core
> allows it.
The allOf section has below restriction, I not understand well that still need to describe
items here?
- if:
properties:
phy_type:
const: hsic
required:
- phy_type
then:
properties:
pinctrl-names:
items:
- const: idle
- const: active
else:
properties:
pinctrl-names:
oneOf:
- items:
- const: default
- enum:
- host
- device
- items:
- const: default
Thanks,
Peng.
>
> > +
> > + pinctrl-0:
> > + maxItems: 1
> > +
> > + pinctrl-1:
> > + maxItems: 1
> > +
> > + phys:
> > + maxItems: 1
> > +
> > + phy-names:
> > + const: usb-phy
> > +
> > + vbus-supply:
> > + description: reference to the VBUS regulator.
> > +
> > +required:
> > + - compatible
> > + - reg
> > + - interrupts
> > +
> > +allOf:
> > + - $ref: usb-drd.yaml#
> > + - $ref: usb-hcd.yaml#
> > + - if:
> > + properties:
> > + mux-controls:
> > + true
> > + then:
> > + properties:
> > + mux-control-names:
> > + const: usb_switch
> > + - if:
> > + properties:
> > + phy_type:
> > + const: hsic
> > +
> > + required:
> > + - phy_type
> > + then:
> > + properties:
> > + pinctrl-names:
> > + items:
> > + - const: idle
> > + - const: active
> > + else:
> > + properties:
> > + pinctrl-names:
> > + oneOf:
> > + - items:
> > + - const: default
> > + - enum:
> > + - host
> > + - device
> > + - items:
> > + - const: default
> > + - if:
> > + properties:
> > + compatible:
> > + enum:
> > + - fsl,imx23-usb
> > + - fsl,imx25-usb
> > + - fsl,imx27-usb
> > + - fsl,imx28-usb
> > + - fsl,imx6q-usb
> > + - fsl,imx6sl-usb
> > + - fsl,imx6sx-usb
> > + - fsl,imx6ul-usb
> > + - fsl,imx7d-usb
> > + - fsl,imx7ulp-usb
> > + then:
> > + properties:
> > + fsl,usbmisc:
>
> What's the type? Which other schema defined it?
>
> Same applies to several other properties - are you sure they are already
> defined by some other schema?
> > +...
>
> Best regards,
> Krzysztof
More information about the linux-arm-kernel
mailing list