[PATCH v3 0/3] Debix Model A board devicetree

[Laurent Pinchart]

Hi Dan,

Thank you for the patches.

On Wed, Oct 12, 2022 at 11:21:18AM +0100, Daniel Scally wrote:
> Hello
> 
> This series adds a .dts file for the Polyhex Debix Model A board [1]
> A binding for the vendor is also added.
> 
> [1] http://www.polyhex.net/product/embedded-motherboard/board/nxp.html?id=483

For the whole series,

Tested-by: Laurent Pinchart <laurent.pinchart at ideasonboard.com>

> Daniel Scally (3):
>   dt-bindings: vendor-prefixes: Add Polyhex Technology Co.
>   dt-bindings: arm: fsl: Enumerate Debix Model A Board
>   arm64: dts: Add device tree for the Debix Model A Board
> 
>  .../devicetree/bindings/arm/fsl.yaml          |   1 +
>  .../devicetree/bindings/vendor-prefixes.yaml  |   2 +
>  arch/arm64/boot/dts/freescale/Makefile        |   1 +
>  .../dts/freescale/imx8mp-debix-model-a.dts    | 529 ++++++++++++++++++
>  4 files changed, 533 insertions(+)
>  create mode 100644 arch/arm64/boot/dts/freescale/imx8mp-debix-model-a.dts

-- 
Regards,

Laurent Pinchart