[PATCH V4 0/7] imx: blk-ctrl: Add interconnect for i.MX8MP

[Marek Vasut]

On 10/11/22 22:10, Tim Harvey wrote:
> On Fri, Jul 8, 2022 at 1:57 AM Peng Fan (OSS) <peng.fan at oss.nxp.com> wrote:
>>
>> From: Peng Fan <peng.fan at nxp.com>
>>
>> V4:
>>   Because the header is not included when adding NoC node, the fsl,imx8mp.h
>>   needs be included in this patchset. So include it in patch 6
>>
>> V3:
>>   Move adding NoC node patch to i.MX8MP ICC driver patchset
>>   Per Lucas's comments, warn once when icc bulk get not return probe defer and continue.
>>
>> V2:
>>   Use a low bandwidth value instead INT_MAX
>>   Minor fix to move fsl,imx8mp.h out to dts patch, not driver patch
>>   Add A-b tag from DT maintainer
>>
>> i.MX8MP NoC settings is invalid after related power domain up. So
>> need to set valid values after power domain up.
>>
>> This patchset is to bind interconnect for each entry in blk ctrl.
>>
>> This patchset is not include DVFS DDRC feature.
>>
>> Peng Fan (7):
>>    dt-bindings: soc: imx: add interconnect property for i.MX8MP media blk
>>      ctrl
>>    dt-bindings: soc: imx: add interconnect property for i.MX8MP hdmi blk
>>      ctrl
>>    dt-bindings: soc: imx: add interconnect property for i.MX8MP hsio blk
>>      ctrl
>>    soc: imx: add icc paths for i.MX8MP media blk ctrl
>>    soc: imx: add icc paths for i.MX8MP hsio/hdmi blk ctrl
>>    arm64: dts: imx8mp: add interconnects for media blk ctrl
>>    arm64: dts: imx8mp: add interconnect for hsio blk ctrl
>>
>>   .../soc/imx/fsl,imx8mp-hdmi-blk-ctrl.yaml     |  9 +++++
>>   .../soc/imx/fsl,imx8mp-hsio-blk-ctrl.yaml     | 10 +++++
>>   .../soc/imx/fsl,imx8mp-media-blk-ctrl.yaml    | 14 +++++++
>>   arch/arm64/boot/dts/freescale/imx8mp.dtsi     | 18 +++++++++
>>   drivers/soc/imx/imx8m-blk-ctrl.c              | 39 +++++++++++++++++++
>>   drivers/soc/imx/imx8mp-blk-ctrl.c             | 35 +++++++++++++++++
>>   6 files changed, 125 insertions(+)
>>
>> --
>> 2.25.1
>>
> 
> Hi Peng,
> 
> I built origin/master from commit 041bc24d867a today for an imx8mp
> board and am running into errors that appear to be introduced by this
> series:
> [   15.177372] platform 381f0040.usb-phy: deferred probe pending
> [   15.183155] platform 382f0040.usb-phy: deferred probe pending
> [   15.188928] platform 33800000.pcie: deferred probe pending
> [   15.194439] platform 32ec0000.blk-ctrl: deferred probe pending
> [   15.200287] platform 38330000.blk-ctrl: deferred probe pending
> [   15.206129] platform 32f10000.blk-ctrl: deferred probe pending
> [   15.211974] platform 32f10100.usb: deferred probe pending
> [   15.217382] platform 32f10108.usb: deferred probe pending
> [   15.222791] platform cpufreq-dt: deferred probe pending
> # cat /sys/kernel/debug/devices_deferred
> 381f0040.usb-phy        platform: supplier 32f10000.blk-ctrl not ready
> 382f0040.usb-phy        platform: supplier 32f10000.blk-ctrl not ready
> 33800000.pcie   platform: supplier 32f10000.blk-ctrl not ready
> 32ec0000.blk-ctrl       imx8m-blk-ctrl: failed to get noc entries
> 38330000.blk-ctrl       imx8m-blk-ctrl: failed to get noc entries
> 32f10000.blk-ctrl       imx8mp-blk-ctrl: failed to get noc entries
> 32f10100.usb    platform: supplier 32f10000.blk-ctrl not ready
> 32f10108.usb    platform: supplier 32f10000.blk-ctrl not ready
> cpufreq-dt
> 
> Is there a driver I'm perhaps missing that is needed now or are there
> some patches that come from a different unmerged tree needed?

Do you have these enabled ?

CONFIG_INTERCONNECT_IMX8MM=y
CONFIG_INTERCONNECT_IMX8MN=y
CONFIG_INTERCONNECT_IMX8MQ=y
CONFIG_INTERCONNECT_IMX8MP=y