[PATCH 1/6] usb: chipidea: usbmisc_imx: Fix i.MX53 clock sel masks

[Sascha Hauer]

According to the reference manual the masks for the
MX53_USB_CTRL_1_H*_XCVR_CLK_SEL bits are 0x3, not 0x11 (which were
probably meant as 0b11).

Signed-off-by: Sascha Hauer <s.hauer at pengutronix.de>
---
 drivers/usb/chipidea/usbmisc_imx.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/usb/chipidea/usbmisc_imx.c b/drivers/usb/chipidea/usbmisc_imx.c
index bac0f5458cab9..8f805aa9c383c 100644
--- a/drivers/usb/chipidea/usbmisc_imx.c
+++ b/drivers/usb/chipidea/usbmisc_imx.c
@@ -42,9 +42,9 @@
 #define MX53_USB_OTG_PHY_CTRL_0_OFFSET	0x08
 #define MX53_USB_OTG_PHY_CTRL_1_OFFSET	0x0c
 #define MX53_USB_CTRL_1_OFFSET	        0x10
-#define MX53_USB_CTRL_1_H2_XCVR_CLK_SEL_MASK (0x11 << 2)
+#define MX53_USB_CTRL_1_H2_XCVR_CLK_SEL_MASK (0x3 << 2)
 #define MX53_USB_CTRL_1_H2_XCVR_CLK_SEL_ULPI BIT(2)
-#define MX53_USB_CTRL_1_H3_XCVR_CLK_SEL_MASK (0x11 << 6)
+#define MX53_USB_CTRL_1_H3_XCVR_CLK_SEL_MASK (0x3 << 6)
 #define MX53_USB_CTRL_1_H3_XCVR_CLK_SEL_ULPI BIT(6)
 #define MX53_USB_UH2_CTRL_OFFSET	0x14
 #define MX53_USB_UH3_CTRL_OFFSET	0x18
-- 
2.30.2