stable-rc/linux-5.10.y bisection: baseline.login on panda
Tony Lindgren
tony at atomide.com
Mon Oct 10 22:15:58 PDT 2022
* Stephen Boyd <sboyd at kernel.org> [221011 00:47]:
> Quoting Mark Brown (2022-10-10 04:29:03)
> > The KernelCI bisection bot bisected a boot failure on the 5.10-rc stable
> > tree on Panda to d86c6447ee250 ("clk: ti: Stop using legacy clkctrl names
> > for omap4") in the v5.10 stable tree. There's a lot of clock related
> > warnings/errors including:
> >
> > <4>[ 0.000000] WARNING: CPU: 0 PID: 0 at drivers/clk/clk.c:3778 __clk_register+0x464/0x868
> > <4>[ 0.000000] ti_dt_clocks_register: failed to lookup clock node abe-clkctrl:0008:24, ret=-517
> > <4>[ 0.416076] omap_hwmod: debugss: cannot _init_clocks
> > <4>[ 0.421447] ------------[ cut here ]------------
> > <4>[ 0.426513] WARNING: CPU: 0 PID: 1 at arch/arm/mach-omap2/omap_hwmod.c:2371 _init+0x428/0x488
> >
> > (there's a *lot* of probe deferrals and hwmods that fail to init). The
> > last output from the kernel is:
> >
> > <3>[ 10.523590] twl6030_uv_to_vsel:OUT OF RANGE! non mapped vsel for 1410000 Vs max 1316660
> > <6>[ 10.531890] Power Management for TI OMAP4+ devices.
> > <4>[ 10.537048] OMAP4 PM: u-boot >= v2012.07 is required for full PM support
> > <5>[ 10.544555] Loading compiled-in X.509 certificates
> >
> > I've left the full report from the bot with more information including
> > full logs and a reported-by tag below:
>
> I don't think we want that commit on stable. It depends on a DT change
> that may not be present. Tony?
Correct, that commit depends on devicetree data being available.
Regards,
Tony
More information about the linux-arm-kernel
mailing list