From: Philippe Schenker <philippe.schenker at toradex.com>
Since it seems to be a naming-convention to add -hog for gpio hogs do
this.
Signed-off-by: Philippe Schenker <philippe.schenker at toradex.com>
---
arch/arm/boot/dts/imx6ull-colibri-iris-v2.dts | 8 ++++----
arch/arm/boot/dts/imx6ull-colibri-iris.dtsi | 4 ++--
arch/arm/boot/dts/imx6ull-colibri-wifi-iris-v2.dts | 8 ++++----
3 files changed, 10 insertions(+), 10 deletions(-)
diff --git a/arch/arm/boot/dts/imx6ull-colibri-iris-v2.dts b/arch/arm/boot/dts/imx6ull-colibri-iris-v2.dts
index fac7428685b4..f6b31118be17 100644
--- a/arch/arm/boot/dts/imx6ull-colibri-iris-v2.dts
+++ b/arch/arm/boot/dts/imx6ull-colibri-iris-v2.dts
@@ -29,7 +29,7 @@ &backlight {
&gpio1 {
/* This turns the LVDS transceiver on */
- lvds-power-on {
+ lvds-power-on-hog {
gpio-hog;
gpios = <14 GPIO_ACTIVE_HIGH>; /* SODIMM 99 */
line-name = "LVDS_POWER_ON";
@@ -42,7 +42,7 @@ &gpio2 {
* This switches the LVDS transceiver to the single-channel
* output mode.
*/
- lvds-ch-mode {
+ lvds-ch-mode-hog {
gpio-hog;
gpios = <0 GPIO_ACTIVE_HIGH>; /* SODIMM 55 */
line-name = "LVDS_CH_MODE";
@@ -52,7 +52,7 @@ lvds-ch-mode {
/*
* This switches the LVDS transceiver to the 24-bit RGB mode.
*/
- lvds-rgb-mode {
+ lvds-rgb-mode-hog {
gpio-hog;
gpios = <1 GPIO_ACTIVE_HIGH>; /* SODIMM 63 */
line-name = "LVDS_RGB_MODE";
@@ -64,7 +64,7 @@ &gpio5 {
/*
* This switches the LVDS transceiver to VESA color mapping mode.
*/
- lvds-color-map {
+ lvds-color-map-hog {
gpio-hog;
gpios = <3 GPIO_ACTIVE_HIGH>; /* SODIMM 95 */
line-name = "LVDS_COLOR_MAP";
diff --git a/arch/arm/boot/dts/imx6ull-colibri-iris.dtsi b/arch/arm/boot/dts/imx6ull-colibri-iris.dtsi
index 7f3b37baba88..166a0aefc869 100644
--- a/arch/arm/boot/dts/imx6ull-colibri-iris.dtsi
+++ b/arch/arm/boot/dts/imx6ull-colibri-iris.dtsi
@@ -59,7 +59,7 @@ &gpio1 {
* in userspace.
* The same applies to uart1_tx_on.
*/
- uart25_tx_on {
+ uart25_tx_on-hog {
gpio-hog;
gpios = <15 0>;
output-high;
@@ -67,7 +67,7 @@ uart25_tx_on {
};
&gpio2 {
- uart1_tx_on {
+ uart1_tx_on-hog {
gpio-hog;
gpios = <7 0>;
output-high;
diff --git a/arch/arm/boot/dts/imx6ull-colibri-wifi-iris-v2.dts b/arch/arm/boot/dts/imx6ull-colibri-wifi-iris-v2.dts
index ed89d07beae5..488da6df56fa 100644
--- a/arch/arm/boot/dts/imx6ull-colibri-wifi-iris-v2.dts
+++ b/arch/arm/boot/dts/imx6ull-colibri-wifi-iris-v2.dts
@@ -29,7 +29,7 @@ &backlight {
&gpio1 {
/* This turns the LVDS transceiver on */
- lvds-power-on {
+ lvds-power-on-hog {
gpio-hog;
gpios = <14 GPIO_ACTIVE_HIGH>; /* SODIMM 99 */
line-name = "LVDS_POWER_ON";
@@ -42,7 +42,7 @@ &gpio2 {
* This switches the LVDS transceiver to the single-channel
* output mode.
*/
- lvds-ch-mode {
+ lvds-ch-mode-hog {
gpio-hog;
gpios = <0 GPIO_ACTIVE_HIGH>; /* SODIMM 55 */
line-name = "LVDS_CH_MODE";
@@ -52,7 +52,7 @@ lvds-ch-mode {
/*
* This switches the LVDS transceiver to the 24-bit RGB mode.
*/
- lvds-rgb-mode {
+ lvds-rgb-mode-hog {
gpio-hog;
gpios = <1 GPIO_ACTIVE_HIGH>; /* SODIMM 63 */
line-name = "LVDS_RGB_MODE";
@@ -64,7 +64,7 @@ &gpio5 {
/*
* This switches the LVDS transceiver to VESA color mapping mode.
*/
- lvds-color-map {
+ lvds-color-map-hog {
gpio-hog;
gpios = <3 GPIO_ACTIVE_HIGH>; /* SODIMM 95 */
line-name = "LVDS_COLOR_MAP";
--
2.37.3