[PATCH 1/2] ARM: dts: imx6qdl-gw5904: add internal mdio nodes
Tim Harvey
tharvey at gateworks.com
Wed Nov 30 16:31:08 PST 2022
Complete the switch definition by adding the internal mdio nodes.
Signed-off-by: Tim Harvey <tharvey at gateworks.com>
---
arch/arm/boot/dts/imx6qdl-gw5904.dtsi | 35 +++++++++++++++++++++++++++
1 file changed, 35 insertions(+)
diff --git a/arch/arm/boot/dts/imx6qdl-gw5904.dtsi b/arch/arm/boot/dts/imx6qdl-gw5904.dtsi
index 612b6e068e28..08463e65dca3 100644
--- a/arch/arm/boot/dts/imx6qdl-gw5904.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-gw5904.dtsi
@@ -212,6 +212,27 @@ switch at 0 {
compatible = "marvell,mv88e6085";
reg = <0>;
+ mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ sw_phy0: ethernet-phy at 0 {
+ reg = <0x0>;
+ };
+
+ sw_phy1: ethernet-phy at 1 {
+ reg = <0x1>;
+ };
+
+ sw_phy2: ethernet-phy at 2 {
+ reg = <0x2>;
+ };
+
+ sw_phy3: ethernet-phy at 3 {
+ reg = <0x3>;
+ };
+ };
+
ports {
#address-cells = <1>;
#size-cells = <0>;
@@ -219,27 +240,41 @@ ports {
port at 0 {
reg = <0>;
label = "lan4";
+ phy-handle = <&sw_phy0>;
+ phy-mode = "internal";
};
port at 1 {
reg = <1>;
label = "lan3";
+ phy-handle = <&sw_phy1>;
+ phy-mode = "internal";
};
port at 2 {
reg = <2>;
label = "lan2";
+ phy-handle = <&sw_phy2>;
+ phy-mode = "internal";
};
port at 3 {
reg = <3>;
label = "lan1";
+ phy-handle = <&sw_phy3>;
+ phy-mode = "internal";
};
port at 5 {
reg = <5>;
label = "cpu";
ethernet = <&fec>;
+ phy-mode = "rgmii-id";
+
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ };
};
};
};
--
2.25.1
More information about the linux-arm-kernel
mailing list