[PATCH v2 08/11] pwm: mtk-disp: Propagate errors in .get_state() to the caller

[Uwe Kleine-König]

.get_state() can return an error indication. Make use of it to propagate
failing hardware accesses.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig at pengutronix.de>
---
 drivers/pwm/pwm-mtk-disp.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/pwm/pwm-mtk-disp.c b/drivers/pwm/pwm-mtk-disp.c
index 9a6bb334a31b..67e5799dd157 100644
--- a/drivers/pwm/pwm-mtk-disp.c
+++ b/drivers/pwm/pwm-mtk-disp.c
@@ -184,14 +184,14 @@ static int mtk_disp_pwm_get_state(struct pwm_chip *chip,
 	err = clk_prepare_enable(mdp->clk_main);
 	if (err < 0) {
 		dev_err(chip->dev, "Can't enable mdp->clk_main: %pe\n", ERR_PTR(err));
-		return 0;
+		return err;
 	}
 
 	err = clk_prepare_enable(mdp->clk_mm);
 	if (err < 0) {
 		dev_err(chip->dev, "Can't enable mdp->clk_mm: %pe\n", ERR_PTR(err));
 		clk_disable_unprepare(mdp->clk_main);
-		return 0;
+		return err;
 	}
 
 	rate = clk_get_rate(mdp->clk_main);
-- 
2.38.1