[RFC PATCH v4 4/4] ptp_ocp: implement DPLL ops
Vadim Fedorenko
vfedorenko at novek.ru
Tue Nov 29 13:37:24 PST 2022
From: Vadim Fedorenko <vadfed at fb.com>
Implement basic DPLL operations in ptp_ocp driver as the
simplest example of using new subsystem.
Signed-off-by: Vadim Fedorenko <vadfed at fb.com>
---
drivers/ptp/Kconfig | 1 +
drivers/ptp/ptp_ocp.c | 123 +++++++++++++++++++++++++++++-------------
2 files changed, 87 insertions(+), 37 deletions(-)
diff --git a/drivers/ptp/Kconfig b/drivers/ptp/Kconfig
index fe4971b65c64..8c4cfabc1bfa 100644
--- a/drivers/ptp/Kconfig
+++ b/drivers/ptp/Kconfig
@@ -177,6 +177,7 @@ config PTP_1588_CLOCK_OCP
depends on COMMON_CLK
select NET_DEVLINK
select CRC16
+ select DPLL
help
This driver adds support for an OpenCompute time card.
diff --git a/drivers/ptp/ptp_ocp.c b/drivers/ptp/ptp_ocp.c
index 154d58cbd9ce..605853ac4a12 100644
--- a/drivers/ptp/ptp_ocp.c
+++ b/drivers/ptp/ptp_ocp.c
@@ -23,6 +23,8 @@
#include <linux/mtd/mtd.h>
#include <linux/nvmem-consumer.h>
#include <linux/crc16.h>
+#include <linux/dpll.h>
+#include <uapi/linux/dpll.h>
#define PCI_VENDOR_ID_FACEBOOK 0x1d9b
#define PCI_DEVICE_ID_FACEBOOK_TIMECARD 0x0400
@@ -353,6 +355,7 @@ struct ptp_ocp {
struct ptp_ocp_signal signal[4];
struct ptp_ocp_sma_connector sma[4];
const struct ocp_sma_op *sma_op;
+ struct dpll_device *dpll;
};
#define OCP_REQ_TIMESTAMP BIT(0)
@@ -835,18 +838,19 @@ static DEFINE_IDR(ptp_ocp_idr);
struct ocp_selector {
const char *name;
int value;
+ int dpll_type;
};
static const struct ocp_selector ptp_ocp_clock[] = {
- { .name = "NONE", .value = 0 },
- { .name = "TOD", .value = 1 },
- { .name = "IRIG", .value = 2 },
- { .name = "PPS", .value = 3 },
- { .name = "PTP", .value = 4 },
- { .name = "RTC", .value = 5 },
- { .name = "DCF", .value = 6 },
- { .name = "REGS", .value = 0xfe },
- { .name = "EXT", .value = 0xff },
+ { .name = "NONE", .value = 0, .dpll_type = 0 },
+ { .name = "TOD", .value = 1, .dpll_type = 0 },
+ { .name = "IRIG", .value = 2, .dpll_type = 0 },
+ { .name = "PPS", .value = 3, .dpll_type = 0 },
+ { .name = "PTP", .value = 4, .dpll_type = 0 },
+ { .name = "RTC", .value = 5, .dpll_type = 0 },
+ { .name = "DCF", .value = 6, .dpll_type = 0 },
+ { .name = "REGS", .value = 0xfe, .dpll_type = 0 },
+ { .name = "EXT", .value = 0xff, .dpll_type = 0 },
{ }
};
@@ -855,37 +859,37 @@ static const struct ocp_selector ptp_ocp_clock[] = {
#define SMA_SELECT_MASK GENMASK(14, 0)
static const struct ocp_selector ptp_ocp_sma_in[] = {
- { .name = "10Mhz", .value = 0x0000 },
- { .name = "PPS1", .value = 0x0001 },
- { .name = "PPS2", .value = 0x0002 },
- { .name = "TS1", .value = 0x0004 },
- { .name = "TS2", .value = 0x0008 },
- { .name = "IRIG", .value = 0x0010 },
- { .name = "DCF", .value = 0x0020 },
- { .name = "TS3", .value = 0x0040 },
- { .name = "TS4", .value = 0x0080 },
- { .name = "FREQ1", .value = 0x0100 },
- { .name = "FREQ2", .value = 0x0200 },
- { .name = "FREQ3", .value = 0x0400 },
- { .name = "FREQ4", .value = 0x0800 },
- { .name = "None", .value = SMA_DISABLE },
+ { .name = "10Mhz", .value = 0x0000, .dpll_type = DPLL_PIN_SIGNAL_TYPE_10_MHZ },
+ { .name = "PPS1", .value = 0x0001, .dpll_type = DPLL_PIN_SIGNAL_TYPE_1_PPS },
+ { .name = "PPS2", .value = 0x0002, .dpll_type = DPLL_PIN_SIGNAL_TYPE_1_PPS },
+ { .name = "TS1", .value = 0x0004, .dpll_type = DPLL_PIN_SIGNAL_TYPE_CUSTOM_FREQ },
+ { .name = "TS2", .value = 0x0008, .dpll_type = DPLL_PIN_SIGNAL_TYPE_CUSTOM_FREQ },
+ { .name = "IRIG", .value = 0x0010, .dpll_type = DPLL_PIN_SIGNAL_TYPE_CUSTOM_FREQ },
+ { .name = "DCF", .value = 0x0020, .dpll_type = DPLL_PIN_SIGNAL_TYPE_CUSTOM_FREQ },
+ { .name = "TS3", .value = 0x0040, .dpll_type = DPLL_PIN_SIGNAL_TYPE_CUSTOM_FREQ },
+ { .name = "TS4", .value = 0x0080, .dpll_type = DPLL_PIN_SIGNAL_TYPE_CUSTOM_FREQ },
+ { .name = "FREQ1", .value = 0x0100, .dpll_type = DPLL_PIN_SIGNAL_TYPE_CUSTOM_FREQ },
+ { .name = "FREQ2", .value = 0x0200, .dpll_type = DPLL_PIN_SIGNAL_TYPE_CUSTOM_FREQ },
+ { .name = "FREQ3", .value = 0x0400, .dpll_type = DPLL_PIN_SIGNAL_TYPE_CUSTOM_FREQ },
+ { .name = "FREQ4", .value = 0x0800, .dpll_type = DPLL_PIN_SIGNAL_TYPE_CUSTOM_FREQ },
+ { .name = "None", .value = SMA_DISABLE, .dpll_type = 0 },
{ }
};
static const struct ocp_selector ptp_ocp_sma_out[] = {
- { .name = "10Mhz", .value = 0x0000 },
- { .name = "PHC", .value = 0x0001 },
- { .name = "MAC", .value = 0x0002 },
- { .name = "GNSS1", .value = 0x0004 },
- { .name = "GNSS2", .value = 0x0008 },
- { .name = "IRIG", .value = 0x0010 },
- { .name = "DCF", .value = 0x0020 },
- { .name = "GEN1", .value = 0x0040 },
- { .name = "GEN2", .value = 0x0080 },
- { .name = "GEN3", .value = 0x0100 },
- { .name = "GEN4", .value = 0x0200 },
- { .name = "GND", .value = 0x2000 },
- { .name = "VCC", .value = 0x4000 },
+ { .name = "10Mhz", .value = 0x0000, .dpll_type = DPLL_PIN_SIGNAL_TYPE_10_MHZ },
+ { .name = "PHC", .value = 0x0001, .dpll_type = DPLL_PIN_SIGNAL_TYPE_CUSTOM_FREQ },
+ { .name = "MAC", .value = 0x0002, .dpll_type = DPLL_PIN_SIGNAL_TYPE_CUSTOM_FREQ },
+ { .name = "GNSS1", .value = 0x0004, .dpll_type = DPLL_PIN_SIGNAL_TYPE_1_PPS },
+ { .name = "GNSS2", .value = 0x0008, .dpll_type = DPLL_PIN_SIGNAL_TYPE_1_PPS },
+ { .name = "IRIG", .value = 0x0010, .dpll_type = DPLL_PIN_SIGNAL_TYPE_CUSTOM_FREQ },
+ { .name = "DCF", .value = 0x0020, .dpll_type = DPLL_PIN_SIGNAL_TYPE_CUSTOM_FREQ },
+ { .name = "GEN1", .value = 0x0040, .dpll_type = DPLL_PIN_SIGNAL_TYPE_CUSTOM_FREQ },
+ { .name = "GEN2", .value = 0x0080, .dpll_type = DPLL_PIN_SIGNAL_TYPE_CUSTOM_FREQ },
+ { .name = "GEN3", .value = 0x0100, .dpll_type = DPLL_PIN_SIGNAL_TYPE_CUSTOM_FREQ },
+ { .name = "GEN4", .value = 0x0200, .dpll_type = DPLL_PIN_SIGNAL_TYPE_CUSTOM_FREQ },
+ { .name = "GND", .value = 0x2000, .dpll_type = 0 },
+ { .name = "VCC", .value = 0x4000, .dpll_type = 0 },
{ }
};
@@ -4175,12 +4179,41 @@ ptp_ocp_detach(struct ptp_ocp *bp)
device_unregister(&bp->dev);
}
+static int ptp_ocp_dpll_get_attr(struct dpll_device *dpll, struct dpll_attr *attr)
+{
+ struct ptp_ocp *bp = (struct ptp_ocp *)dpll_priv(dpll);
+ int sync;
+
+ sync = ioread32(&bp->reg->status) & OCP_STATUS_IN_SYNC;
+ dpll_attr_lock_status_set(attr, sync ? DPLL_LOCK_STATUS_LOCKED : DPLL_LOCK_STATUS_UNLOCKED);
+
+ return 0;
+}
+
+static int ptp_ocp_dpll_pin_get_attr(struct dpll_device *dpll, struct dpll_pin *pin,
+ struct dpll_pin_attr *attr)
+{
+ dpll_pin_attr_type_set(attr, DPLL_PIN_TYPE_EXT);
+ return 0;
+}
+
+static struct dpll_device_ops dpll_ops = {
+ .get = ptp_ocp_dpll_get_attr,
+};
+
+static struct dpll_pin_ops dpll_pin_ops = {
+ .get = ptp_ocp_dpll_pin_get_attr,
+};
+
static int
ptp_ocp_probe(struct pci_dev *pdev, const struct pci_device_id *id)
{
+ const u8 dpll_cookie[DPLL_COOKIE_LEN] = { "OCP" };
+ char pin_desc[PIN_DESC_LEN];
struct devlink *devlink;
+ struct dpll_pin *pin;
struct ptp_ocp *bp;
- int err;
+ int err, i;
devlink = devlink_alloc(&ptp_ocp_devlink_ops, sizeof(*bp), &pdev->dev);
if (!devlink) {
@@ -4230,6 +4263,20 @@ ptp_ocp_probe(struct pci_dev *pdev, const struct pci_device_id *id)
ptp_ocp_info(bp);
devlink_register(devlink);
+
+ bp->dpll = dpll_device_alloc(&dpll_ops, DPLL_TYPE_PPS, dpll_cookie, pdev->bus->number, bp, &pdev->dev);
+ if (!bp->dpll) {
+ dev_err(&pdev->dev, "dpll_device_alloc failed\n");
+ goto out;
+ }
+ dpll_device_register(bp->dpll);
+
+ for (i = 0; i < 4; i++) {
+ snprintf(pin_desc, PIN_DESC_LEN, "sma%d", i + 1);
+ pin = dpll_pin_alloc(pin_desc, PIN_DESC_LEN);
+ dpll_pin_register(bp->dpll, pin, &dpll_pin_ops, bp);
+ }
+
return 0;
out:
@@ -4247,6 +4294,8 @@ ptp_ocp_remove(struct pci_dev *pdev)
struct ptp_ocp *bp = pci_get_drvdata(pdev);
struct devlink *devlink = priv_to_devlink(bp);
+ dpll_device_unregister(bp->dpll);
+ dpll_device_free(bp->dpll);
devlink_unregister(devlink);
ptp_ocp_detach(bp);
pci_disable_device(pdev);
--
2.27.0
More information about the linux-arm-kernel
mailing list