[PATCH v2] ARM: dts: kirkwood: Add Zyxel NSA310S board

[Gregory CLEMENT]

Andrew Lunn <andrew at lunn.ch> writes:

>> +	ethphy0: ethernet-phy at 1 {
>> +		reg = <1>;
>> +		phy-mode = "rgmii-id";
>> +		marvell,reg-init = <0x1 0x16 0x0 0x3>,
>> +						   <0x1 0x10 0x0 0x1017>,
>> +						   <0x1 0x11 0x0 0x4408>,
>> +						   <0x1 0x16 0x0 0x0>;
>
> The indention is wrong here.
>
> Otherwise
>
> Reviewed-by: Andrew Lunn <andrew at lunn.ch>
>
>     Andrew

Applied on mvebu/dt

I fixed the indentation while applying the patch.

Thanks,

Gregory

-- 
Gregory Clement, Bootlin
Embedded Linux and Kernel engineering
http://bootlin.com