[PATCH 5/5] clk: sunxi-ng: d1: Add CAN bus gates and resets

Samuel Holland samuel at sholland.org
Sat Nov 26 11:13:19 PST 2022


From: Fabien Poussin <fabien.poussin at gmail.com>

The D1 CCU contains gates and resets for two CAN buses. While the CAN
bus controllers are only documented for the T113 SoC, the CCU is the
same across all SoC variants.

Signed-off-by: Fabien Poussin <fabien.poussin at gmail.com>
Signed-off-by: Samuel Holland <samuel at sholland.org>
---

 drivers/clk/sunxi-ng/ccu-sun20i-d1.c      | 11 +++++++++++
 drivers/clk/sunxi-ng/ccu-sun20i-d1.h      |  2 +-
 include/dt-bindings/clock/sun20i-d1-ccu.h |  2 ++
 include/dt-bindings/reset/sun20i-d1-ccu.h |  2 ++
 4 files changed, 16 insertions(+), 1 deletion(-)

diff --git a/drivers/clk/sunxi-ng/ccu-sun20i-d1.c b/drivers/clk/sunxi-ng/ccu-sun20i-d1.c
index c5a7df93602c..48a8fb2c43b7 100644
--- a/drivers/clk/sunxi-ng/ccu-sun20i-d1.c
+++ b/drivers/clk/sunxi-ng/ccu-sun20i-d1.c
@@ -469,6 +469,11 @@ static SUNXI_CCU_GATE_HWS(bus_i2c2_clk, "bus-i2c2", apb1_hws,
 static SUNXI_CCU_GATE_HWS(bus_i2c3_clk, "bus-i2c3", apb1_hws,
 			  0x91c, BIT(3), 0);
 
+static SUNXI_CCU_GATE_HWS(bus_can0_clk, "bus-can0", apb1_hws,
+			  0x92c, BIT(0), 0);
+static SUNXI_CCU_GATE_HWS(bus_can1_clk, "bus-can1", apb1_hws,
+			  0x92c, BIT(1), 0);
+
 static const struct clk_parent_data spi_parents[] = {
 	{ .fw_name = "hosc" },
 	{ .hw = &pll_periph0_clk.hw },
@@ -997,6 +1002,8 @@ static struct ccu_common *sun20i_d1_ccu_clks[] = {
 	&bus_i2c1_clk.common,
 	&bus_i2c2_clk.common,
 	&bus_i2c3_clk.common,
+	&bus_can0_clk.common,
+	&bus_can1_clk.common,
 	&spi0_clk.common,
 	&spi1_clk.common,
 	&bus_spi0_clk.common,
@@ -1147,6 +1154,8 @@ static struct clk_hw_onecell_data sun20i_d1_hw_clks = {
 		[CLK_BUS_I2C1]		= &bus_i2c1_clk.common.hw,
 		[CLK_BUS_I2C2]		= &bus_i2c2_clk.common.hw,
 		[CLK_BUS_I2C3]		= &bus_i2c3_clk.common.hw,
+		[CLK_BUS_CAN0]		= &bus_can0_clk.common.hw,
+		[CLK_BUS_CAN1]		= &bus_can1_clk.common.hw,
 		[CLK_SPI0]		= &spi0_clk.common.hw,
 		[CLK_SPI1]		= &spi1_clk.common.hw,
 		[CLK_BUS_SPI0]		= &bus_spi0_clk.common.hw,
@@ -1252,6 +1261,8 @@ static struct ccu_reset_map sun20i_d1_ccu_resets[] = {
 	[RST_BUS_I2C1]		= { 0x91c, BIT(17) },
 	[RST_BUS_I2C2]		= { 0x91c, BIT(18) },
 	[RST_BUS_I2C3]		= { 0x91c, BIT(19) },
+	[RST_BUS_CAN0]		= { 0x92c, BIT(16) },
+	[RST_BUS_CAN1]		= { 0x92c, BIT(17) },
 	[RST_BUS_SPI0]		= { 0x96c, BIT(16) },
 	[RST_BUS_SPI1]		= { 0x96c, BIT(17) },
 	[RST_BUS_EMAC]		= { 0x97c, BIT(16) },
diff --git a/drivers/clk/sunxi-ng/ccu-sun20i-d1.h b/drivers/clk/sunxi-ng/ccu-sun20i-d1.h
index e303176f0d4e..b14da36e2537 100644
--- a/drivers/clk/sunxi-ng/ccu-sun20i-d1.h
+++ b/drivers/clk/sunxi-ng/ccu-sun20i-d1.h
@@ -10,6 +10,6 @@
 #include <dt-bindings/clock/sun20i-d1-ccu.h>
 #include <dt-bindings/reset/sun20i-d1-ccu.h>
 
-#define CLK_NUMBER		(CLK_FANOUT2 + 1)
+#define CLK_NUMBER		(CLK_BUS_CAN1 + 1)
 
 #endif /* _CCU_SUN20I_D1_H_ */
diff --git a/include/dt-bindings/clock/sun20i-d1-ccu.h b/include/dt-bindings/clock/sun20i-d1-ccu.h
index e3ac53315e1a..e143b9929763 100644
--- a/include/dt-bindings/clock/sun20i-d1-ccu.h
+++ b/include/dt-bindings/clock/sun20i-d1-ccu.h
@@ -152,5 +152,7 @@
 #define CLK_FANOUT0		142
 #define CLK_FANOUT1		143
 #define CLK_FANOUT2		144
+#define CLK_BUS_CAN0		145
+#define CLK_BUS_CAN1		146
 
 #endif /* _DT_BINDINGS_CLK_SUN20I_D1_CCU_H_ */
diff --git a/include/dt-bindings/reset/sun20i-d1-ccu.h b/include/dt-bindings/reset/sun20i-d1-ccu.h
index de9ff5203239..f8001cf50bf1 100644
--- a/include/dt-bindings/reset/sun20i-d1-ccu.h
+++ b/include/dt-bindings/reset/sun20i-d1-ccu.h
@@ -73,5 +73,7 @@
 #define RST_BUS_DSP_CFG		63
 #define RST_BUS_DSP_DBG		64
 #define RST_BUS_RISCV_CFG	65
+#define RST_BUS_CAN0		66
+#define RST_BUS_CAN1		67
 
 #endif /* _DT_BINDINGS_RST_SUN20I_D1_CCU_H_ */
-- 
2.37.4




More information about the linux-arm-kernel mailing list