[PATCH 2/2] ARM: dts: sun8i: nanopi-duo2: Fix regulator GPIO reference

[Andre Przywara]

On Fri, 25 Nov 2022 13:54:01 -0600
Samuel Holland <samuel at sholland.org> wrote:

> The property named in the schema is 'enable-gpios', not 'enable-gpio'.
> This makes no difference at runtime, because the regulator is marked as
> always-on, but it breaks validation.
> 
> Fixes: 4701fc6e5dd9 ("ARM: dts: sun8i: add FriendlyARM NanoPi Duo2")
> Signed-off-by: Samuel Holland <samuel at sholland.org>

Reviewed-by: Andre Przywara <andre.przywara at arm.com>

Cheers,
Andre

> ---
> 
>  arch/arm/boot/dts/sun8i-h3-nanopi-duo2.dts | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/arch/arm/boot/dts/sun8i-h3-nanopi-duo2.dts b/arch/arm/boot/dts/sun8i-h3-nanopi-duo2.dts
> index 43641cb82398..343b02b97155 100644
> --- a/arch/arm/boot/dts/sun8i-h3-nanopi-duo2.dts
> +++ b/arch/arm/boot/dts/sun8i-h3-nanopi-duo2.dts
> @@ -57,7 +57,7 @@ reg_vdd_cpux: vdd-cpux-regulator {
>  		regulator-ramp-delay = <50>; /* 4ms */
>  
>  		enable-active-high;
> -		enable-gpio = <&r_pio 0 8 GPIO_ACTIVE_HIGH>; /* PL8 */
> +		enable-gpios = <&r_pio 0 8 GPIO_ACTIVE_HIGH>; /* PL8 */
>  		gpios = <&r_pio 0 6 GPIO_ACTIVE_HIGH>; /* PL6 */
>  		gpios-states = <0x1>;
>  		states = <1100000 0>, <1300000 1>;