[PATCH] ARM: dts: broadcom: align LED node names with dtschema
Krzysztof Kozlowski
krzysztof.kozlowski at linaro.org
Fri Nov 25 06:41:27 PST 2022
The node names should be generic and DT schema expects certain pattern:
bcm4708-asus-rt-ac68u.dtb: leds: 'logo', 'power', 'usb2', 'usb3' do not match any of the regexes: '(^led-[0-9a-f]$|led)', 'pinctrl-[0-9]+'
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski at linaro.org>
---
arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dts | 15 +++++-----
arch/arm/boot/dts/bcm4708-asus-rt-ac68u.dts | 8 +++---
.../bcm4708-buffalo-wzr-1166dhp-common.dtsi | 16 +++++------
.../boot/dts/bcm4708-buffalo-wzr-1750dhp.dts | 16 +++++------
arch/arm/boot/dts/bcm4708-luxul-xap-1510.dts | 6 ++--
arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts | 2 +-
arch/arm/boot/dts/bcm4708-netgear-r6250.dts | 10 +++----
.../arm/boot/dts/bcm4708-netgear-r6300-v2.dts | 10 +++----
arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts | 22 +++++++--------
arch/arm/boot/dts/bcm47081-asus-rt-n18u.dts | 10 +++----
.../boot/dts/bcm47081-buffalo-wzr-600dhp2.dts | 14 +++++-----
.../boot/dts/bcm47081-buffalo-wzr-900dhp.dts | 16 +++++------
arch/arm/boot/dts/bcm47081-luxul-xap-1410.dts | 6 ++--
arch/arm/boot/dts/bcm47081-luxul-xwr-1200.dts | 20 ++++++-------
.../boot/dts/bcm47081-tplink-archer-c5-v2.dts | 18 ++++++------
arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts | 6 ++--
.../boot/dts/bcm4709-buffalo-wxr-1900dhp.dts | 18 ++++++------
arch/arm/boot/dts/bcm4709-netgear-r7000.dts | 16 +++++------
arch/arm/boot/dts/bcm4709-netgear-r8000.dts | 22 +++++++--------
.../boot/dts/bcm4709-tplink-archer-c9-v1.dts | 18 ++++++------
arch/arm/boot/dts/bcm47094-asus-rt-ac88u.dts | 12 ++++----
arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts | 14 +++++-----
arch/arm/boot/dts/bcm47094-dlink-dir-890l.dts | 16 +++++------
.../boot/dts/bcm47094-linksys-panamera.dts | 28 +++++++++----------
arch/arm/boot/dts/bcm47094-luxul-abr-4500.dts | 4 +--
arch/arm/boot/dts/bcm47094-luxul-xap-1610.dts | 6 ++--
arch/arm/boot/dts/bcm47094-luxul-xbr-4500.dts | 4 +--
arch/arm/boot/dts/bcm47094-luxul-xwc-2000.dts | 2 +-
arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts | 20 ++++++-------
.../boot/dts/bcm47094-luxul-xwr-3150-v1.dts | 10 +++----
arch/arm/boot/dts/bcm47094-netgear-r8500.dts | 14 +++++-----
arch/arm/boot/dts/bcm47189-luxul-xap-1440.dts | 4 +--
arch/arm/boot/dts/bcm47189-luxul-xap-810.dts | 10 +++----
arch/arm/boot/dts/bcm47189-tenda-ac9.dts | 14 +++++-----
.../boot/dts/bcm53016-dlink-dwl-8610ap.dts | 8 +++---
arch/arm/boot/dts/bcm53016-meraki-mr32.dts | 6 ++--
arch/arm/boot/dts/bcm947189acdbmr.dts | 6 ++--
37 files changed, 223 insertions(+), 224 deletions(-)
diff --git a/arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dts b/arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dts
index 09ee3e46c0cc..c80ac16ad949 100644
--- a/arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dts
+++ b/arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dts
@@ -28,40 +28,39 @@ memory at 0 {
leds {
compatible = "gpio-leds";
- usb3 {
+ led-usb3 {
label = "bcm53xx:blue:usb3";
gpios = <&chipcommon 0 GPIO_ACTIVE_LOW>;
};
- wan {
+ led-wan {
label = "bcm53xx:blue:wan";
gpios = <&chipcommon 1 GPIO_ACTIVE_LOW>;
};
- lan {
+ led-lan {
label = "bcm53xx:blue:lan";
gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>;
};
- power {
+ led-power {
label = "bcm53xx:blue:power";
gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
linux,default-trigger = "default-on";
};
- all {
+ led-all {
label = "bcm53xx:blue:all";
gpios = <&chipcommon 4 GPIO_ACTIVE_LOW>;
linux,default-trigger = "default-on";
};
- 2ghz {
+ led-2ghz {
label = "bcm53xx:blue:2ghz";
gpios = <&chipcommon 6 GPIO_ACTIVE_LOW>;
};
-
- usb2 {
+ led-usb2 {
label = "bcm53xx:blue:usb2";
gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>;
};
diff --git a/arch/arm/boot/dts/bcm4708-asus-rt-ac68u.dts b/arch/arm/boot/dts/bcm4708-asus-rt-ac68u.dts
index 32619c6045d3..3fe17bd7b86d 100644
--- a/arch/arm/boot/dts/bcm4708-asus-rt-ac68u.dts
+++ b/arch/arm/boot/dts/bcm4708-asus-rt-ac68u.dts
@@ -28,24 +28,24 @@ memory at 0 {
leds {
compatible = "gpio-leds";
- usb2 {
+ led-usb2 {
label = "bcm53xx:blue:usb2";
gpios = <&chipcommon 0 GPIO_ACTIVE_LOW>;
};
- power {
+ led-power {
label = "bcm53xx:blue:power";
gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
linux,default-trigger = "default-on";
};
- logo {
+ led-logo {
label = "bcm53xx:white:logo";
gpios = <&chipcommon 4 GPIO_ACTIVE_LOW>;
linux,default-trigger = "default-on";
};
- usb3 {
+ led-usb3 {
label = "bcm53xx:blue:usb3";
gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>;
};
diff --git a/arch/arm/boot/dts/bcm4708-buffalo-wzr-1166dhp-common.dtsi b/arch/arm/boot/dts/bcm4708-buffalo-wzr-1166dhp-common.dtsi
index a658b9b7bcec..e583b9cbf07c 100644
--- a/arch/arm/boot/dts/bcm4708-buffalo-wzr-1166dhp-common.dtsi
+++ b/arch/arm/boot/dts/bcm4708-buffalo-wzr-1166dhp-common.dtsi
@@ -37,7 +37,7 @@ hc595: gpio_spi at 0 {
leds {
compatible = "gpio-leds";
- usb {
+ led-usb {
/* label = "bcm53xx:blue:usb"; */
function = LED_FUNCTION_USB;
color = <LED_COLOR_ID_BLUE>;
@@ -48,14 +48,14 @@ usb {
linux,default-trigger = "usbport";
};
- power0 {
+ led-power0 {
/* label = "bcm53xx:red:power"; */
function = LED_FUNCTION_FAULT;
color = <LED_COLOR_ID_RED>;
gpios = <&hc595 1 GPIO_ACTIVE_HIGH>;
};
- power1 {
+ led-power1 {
/* label = "bcm53xx:white:power"; */
function = LED_FUNCTION_POWER;
color = <LED_COLOR_ID_WHITE>;
@@ -63,7 +63,7 @@ power1 {
linux,default-trigger = "default-on";
};
- router0 {
+ led-router0 {
/* label = "bcm53xx:blue:router"; */
function = LED_FUNCTION_STATUS;
color = <LED_COLOR_ID_BLUE>;
@@ -71,14 +71,14 @@ router0 {
linux,default-trigger = "default-on";
};
- router1 {
+ led-router1 {
/* label = "bcm53xx:amber:router"; */
function = LED_FUNCTION_STATUS;
color = <LED_COLOR_ID_AMBER>;
gpios = <&hc595 4 GPIO_ACTIVE_HIGH>;
};
- wan {
+ led-wan {
/* label = "bcm53xx:blue:wan"; */
function = LED_FUNCTION_WAN;
color = <LED_COLOR_ID_BLUE>;
@@ -86,14 +86,14 @@ wan {
linux,default-trigger = "default-on";
};
- wireless0 {
+ led-wireless0 {
/* label = "bcm53xx:blue:wireless"; */
function = LED_FUNCTION_WLAN;
color = <LED_COLOR_ID_BLUE>;
gpios = <&hc595 6 GPIO_ACTIVE_HIGH>;
};
- wireless1 {
+ led-wireless1 {
/* label = "bcm53xx:amber:wireless"; */
function = LED_FUNCTION_WLAN;
color = <LED_COLOR_ID_AMBER>;
diff --git a/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts b/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts
index f8f53457dd43..43c698a0a7c3 100644
--- a/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts
+++ b/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts
@@ -49,7 +49,7 @@ hc595: gpio_spi at 0 {
leds {
compatible = "gpio-leds";
- usb {
+ led-usb {
label = "bcm53xx:blue:usb";
gpios = <&hc595 0 GPIO_ACTIVE_HIGH>;
trigger-sources = <&ohci_port1>, <&ehci_port1>,
@@ -58,40 +58,40 @@ usb {
linux,default-trigger = "usbport";
};
- power0 {
+ led-power0 {
label = "bcm53xx:red:power";
gpios = <&hc595 1 GPIO_ACTIVE_HIGH>;
};
- power1 {
+ led-power1 {
label = "bcm53xx:white:power";
gpios = <&hc595 2 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "default-on";
};
- router0 {
+ led-router0 {
label = "bcm53xx:blue:router";
gpios = <&hc595 3 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "default-on";
};
- router1 {
+ led-router1 {
label = "bcm53xx:amber:router";
gpios = <&hc595 4 GPIO_ACTIVE_HIGH>;
};
- wan {
+ led-wan {
label = "bcm53xx:blue:wan";
gpios = <&hc595 5 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "default-on";
};
- wireless0 {
+ led-wireless0 {
label = "bcm53xx:blue:wireless";
gpios = <&hc595 6 GPIO_ACTIVE_HIGH>;
};
- wireless1 {
+ led-wireless1 {
label = "bcm53xx:amber:wireless";
gpios = <&hc595 7 GPIO_ACTIVE_HIGH>;
};
diff --git a/arch/arm/boot/dts/bcm4708-luxul-xap-1510.dts b/arch/arm/boot/dts/bcm4708-luxul-xap-1510.dts
index 14ee410183af..6de7fe204b0c 100644
--- a/arch/arm/boot/dts/bcm4708-luxul-xap-1510.dts
+++ b/arch/arm/boot/dts/bcm4708-luxul-xap-1510.dts
@@ -23,19 +23,19 @@ memory at 0 {
leds {
compatible = "gpio-leds";
- 5ghz {
+ led-5ghz {
label = "bcm53xx:blue:5ghz";
gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>;
linux,default-trigger = "none";
};
- 2ghz {
+ led-2ghz {
label = "bcm53xx:blue:2ghz";
gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>;
linux,default-trigger = "none";
};
- status {
+ led-status {
label = "bcm53xx:green:status";
gpios = <&chipcommon 15 GPIO_ACTIVE_LOW>;
linux,default-trigger = "timer";
diff --git a/arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts b/arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts
index 600ab087f5e5..f5b75ba93512 100644
--- a/arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts
+++ b/arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts
@@ -42,7 +42,7 @@ partition at 0 {
leds {
compatible = "gpio-leds";
- status {
+ led-status {
label = "bcm53xx:green:status";
gpios = <&chipcommon 0 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "timer";
diff --git a/arch/arm/boot/dts/bcm4708-netgear-r6250.dts b/arch/arm/boot/dts/bcm4708-netgear-r6250.dts
index fd6d8d2a4456..89155caf50be 100644
--- a/arch/arm/boot/dts/bcm4708-netgear-r6250.dts
+++ b/arch/arm/boot/dts/bcm4708-netgear-r6250.dts
@@ -29,24 +29,24 @@ memory at 0 {
leds {
compatible = "gpio-leds";
- logo {
+ led-logo {
label = "bcm53xx:white:logo";
gpios = <&chipcommon 1 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "default-on";
};
- power0 {
+ led-power0 {
label = "bcm53xx:green:power";
gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>;
linux,default-trigger = "default-on";
};
- power1 {
+ led-power1 {
label = "bcm53xx:amber:power";
gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
};
- usb {
+ led-usb {
label = "bcm53xx:blue:usb";
gpios = <&chipcommon 8 GPIO_ACTIVE_LOW>;
trigger-sources = <&ohci_port1>, <&ehci_port1>,
@@ -54,7 +54,7 @@ usb {
linux,default-trigger = "usbport";
};
- wireless {
+ led-wireless {
label = "bcm53xx:blue:wireless";
gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
};
diff --git a/arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dts b/arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dts
index 76fc1099d47d..57d00a0b4765 100644
--- a/arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dts
+++ b/arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dts
@@ -28,29 +28,29 @@ memory at 0 {
leds {
compatible = "gpio-leds";
- logo {
+ led-logo {
label = "bcm53xx:white:logo";
gpios = <&chipcommon 1 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "default-on";
};
- power0 {
+ led-power0 {
label = "bcm53xx:green:power";
gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>;
};
- power1 {
+ led-power1 {
label = "bcm53xx:amber:power";
gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
linux,default-trigger = "default-on";
};
- usb {
+ led-usb {
label = "bcm53xx:blue:usb";
gpios = <&chipcommon 8 GPIO_ACTIVE_LOW>;
};
- wireless {
+ led-wireless {
label = "bcm53xx:blue:wireless";
gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
};
diff --git a/arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts b/arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts
index 6bcdfb73cb9e..26cdeb5cc337 100644
--- a/arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts
+++ b/arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts
@@ -28,64 +28,64 @@ memory at 0 {
leds {
compatible = "gpio-leds";
- power-white {
+ led-power-white {
label = "bcm53xx:white:power";
gpios = <&chipcommon 1 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "default-on";
};
- power-amber {
+ led-power-amber {
label = "bcm53xx:amber:power";
gpios = <&chipcommon 2 GPIO_ACTIVE_HIGH>;
};
- usb2 {
+ led-usb2 {
label = "bcm53xx:white:usb2";
gpios = <&chipcommon 3 GPIO_ACTIVE_HIGH>;
trigger-sources = <&ohci_port2>, <&ehci_port2>;
linux,default-trigger = "usbport";
};
- usb3-white {
+ led-usb3-white {
label = "bcm53xx:white:usb3";
gpios = <&chipcommon 4 GPIO_ACTIVE_HIGH>;
trigger-sources = <&xhci_port1>;
linux,default-trigger = "usbport";
};
- usb3-green {
+ led-usb3-green {
label = "bcm53xx:green:usb3";
gpios = <&chipcommon 5 GPIO_ACTIVE_HIGH>;
trigger-sources = <&ohci_port1>, <&ehci_port1>;
linux,default-trigger = "usbport";
};
- wps {
+ led-wps {
label = "bcm53xx:white:wps";
gpios = <&chipcommon 6 GPIO_ACTIVE_HIGH>;
};
- status-red {
+ led-status-red {
label = "bcm53xx:red:status";
gpios = <&chipcommon 8 GPIO_ACTIVE_HIGH>;
};
- status-green {
+ led-status-green {
label = "bcm53xx:green:status";
gpios = <&chipcommon 9 GPIO_ACTIVE_HIGH>;
};
- status-blue {
+ led-status-blue {
label = "bcm53xx:blue:status";
gpios = <&chipcommon 10 GPIO_ACTIVE_HIGH>;
};
- wan-white {
+ led-wan-white {
label = "bcm53xx:white:wan";
gpios = <&chipcommon 12 GPIO_ACTIVE_HIGH>;
};
- wan-red {
+ led-wan-red {
label = "bcm53xx:red:wan";
gpios = <&chipcommon 13 GPIO_ACTIVE_HIGH>;
};
diff --git a/arch/arm/boot/dts/bcm47081-asus-rt-n18u.dts b/arch/arm/boot/dts/bcm47081-asus-rt-n18u.dts
index ca47cc4f2ba1..3854db0118a9 100644
--- a/arch/arm/boot/dts/bcm47081-asus-rt-n18u.dts
+++ b/arch/arm/boot/dts/bcm47081-asus-rt-n18u.dts
@@ -28,30 +28,30 @@ memory at 0 {
leds {
compatible = "gpio-leds";
- power {
+ led-power {
label = "bcm53xx:blue:power";
gpios = <&chipcommon 0 GPIO_ACTIVE_LOW>;
linux,default-trigger = "default-on";
};
- usb2 {
+ led-usb2 {
label = "bcm53xx:blue:usb2";
gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
};
- wan {
+ led-wan {
label = "bcm53xx:blue:wan";
gpios = <&chipcommon 6 GPIO_ACTIVE_LOW>;
linux,default-trigger = "default-on";
};
- lan {
+ led-lan {
label = "bcm53xx:blue:lan";
gpios = <&chipcommon 9 GPIO_ACTIVE_LOW>;
linux,default-trigger = "default-on";
};
- usb3 {
+ led-usb3 {
label = "bcm53xx:blue:usb3";
gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>;
};
diff --git a/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts b/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts
index 0edc2543e568..407319cb5c0d 100644
--- a/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts
+++ b/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts
@@ -49,40 +49,40 @@ hc595: gpio_spi at 0 {
leds {
compatible = "gpio-leds";
- power0 {
+ led-power0 {
label = "bcm53xx:green:power";
gpios = <&hc595 1 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "default-on";
};
- power1 {
+ led-power1 {
label = "bcm53xx:red:power";
gpios = <&hc595 2 GPIO_ACTIVE_HIGH>;
};
- router0 {
+ led-router0 {
label = "bcm53xx:green:router";
gpios = <&hc595 3 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "default-on";
};
- router1 {
+ led-router1 {
label = "bcm53xx:amber:router";
gpios = <&hc595 4 GPIO_ACTIVE_HIGH>;
};
- wan {
+ led-wan {
label = "bcm53xx:green:wan";
gpios = <&hc595 5 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "default-on";
};
- wireless0 {
+ led-wireless0 {
label = "bcm53xx:green:wireless";
gpios = <&hc595 6 GPIO_ACTIVE_HIGH>;
};
- wireless1 {
+ led-wireless1 {
label = "bcm53xx:amber:wireless";
gpios = <&hc595 7 GPIO_ACTIVE_HIGH>;
};
diff --git a/arch/arm/boot/dts/bcm47081-buffalo-wzr-900dhp.dts b/arch/arm/boot/dts/bcm47081-buffalo-wzr-900dhp.dts
index 1f0998f34afd..f8622ecce6a2 100644
--- a/arch/arm/boot/dts/bcm47081-buffalo-wzr-900dhp.dts
+++ b/arch/arm/boot/dts/bcm47081-buffalo-wzr-900dhp.dts
@@ -49,45 +49,45 @@ hc595: gpio_spi at 0 {
leds {
compatible = "gpio-leds";
- usb {
+ led-usb {
label = "bcm53xx:green:usb";
gpios = <&hc595 0 GPIO_ACTIVE_HIGH>;
};
- power0 {
+ led-power0 {
label = "bcm53xx:green:power";
gpios = <&hc595 1 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "default-on";
};
- power1 {
+ led-power1 {
label = "bcm53xx:red:power";
gpios = <&hc595 2 GPIO_ACTIVE_HIGH>;
};
- router0 {
+ led-router0 {
label = "bcm53xx:green:router";
gpios = <&hc595 3 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "default-on";
};
- router1 {
+ led-router1 {
label = "bcm53xx:amber:router";
gpios = <&hc595 4 GPIO_ACTIVE_HIGH>;
};
- wan {
+ led-wan {
label = "bcm53xx:green:wan";
gpios = <&hc595 5 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "default-on";
};
- wireless0 {
+ led-wireless0 {
label = "bcm53xx:green:wireless";
gpios = <&hc595 6 GPIO_ACTIVE_HIGH>;
};
- wireless1 {
+ led-wireless1 {
label = "bcm53xx:amber:wireless";
gpios = <&hc595 7 GPIO_ACTIVE_HIGH>;
};
diff --git a/arch/arm/boot/dts/bcm47081-luxul-xap-1410.dts b/arch/arm/boot/dts/bcm47081-luxul-xap-1410.dts
index c8c02377543b..76c9b30b868d 100644
--- a/arch/arm/boot/dts/bcm47081-luxul-xap-1410.dts
+++ b/arch/arm/boot/dts/bcm47081-luxul-xap-1410.dts
@@ -23,19 +23,19 @@ memory at 0 {
leds {
compatible = "gpio-leds";
- 5ghz {
+ led-5ghz {
label = "bcm53xx:blue:5ghz";
gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>;
linux,default-trigger = "none";
};
- 2ghz {
+ led-2ghz {
label = "bcm53xx:blue:2ghz";
gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>;
linux,default-trigger = "none";
};
- status {
+ led-status {
label = "bcm53xx:green:status";
gpios = <&chipcommon 15 GPIO_ACTIVE_LOW>;
linux,default-trigger = "timer";
diff --git a/arch/arm/boot/dts/bcm47081-luxul-xwr-1200.dts b/arch/arm/boot/dts/bcm47081-luxul-xwr-1200.dts
index 3b35a7af4b1c..6ef0c0788e62 100644
--- a/arch/arm/boot/dts/bcm47081-luxul-xwr-1200.dts
+++ b/arch/arm/boot/dts/bcm47081-luxul-xwr-1200.dts
@@ -29,62 +29,62 @@ nvram at 1eff0000 {
leds {
compatible = "gpio-leds";
- power {
+ led-power {
label = "bcm53xx:green:power";
gpios = <&chipcommon 0 GPIO_ACTIVE_LOW>;
linux,default-trigger = "default-on";
};
- lan3 {
+ led-lan3 {
label = "bcm53xx:green:lan3";
gpios = <&chipcommon 1 GPIO_ACTIVE_LOW>;
linux,default-trigger = "none";
};
- lan4 {
+ led-lan4 {
label = "bcm53xx:green:lan4";
gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>;
linux,default-trigger = "none";
};
- wan {
+ led-wan {
label = "bcm53xx:green:wan";
gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
linux,default-trigger = "none";
};
- lan2 {
+ led-lan2 {
label = "bcm53xx:green:lan2";
gpios = <&chipcommon 6 GPIO_ACTIVE_LOW>;
linux,default-trigger = "none";
};
- usb {
+ led-usb {
label = "bcm53xx:green:usb";
gpios = <&chipcommon 8 GPIO_ACTIVE_LOW>;
trigger-sources = <&ohci_port2>, <&ehci_port2>;
linux,default-trigger = "usbport";
};
- status {
+ led-status {
label = "bcm53xx:green:status";
gpios = <&chipcommon 10 GPIO_ACTIVE_LOW>;
linux,default-trigger = "timer";
};
- 2ghz {
+ led-2ghz {
label = "bcm53xx:green:2ghz";
gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>;
linux,default-trigger = "none";
};
- 5ghz {
+ led-5ghz {
label = "bcm53xx:green:5ghz";
gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>;
linux,default-trigger = "none";
};
- lan1 {
+ led-lan1 {
label = "bcm53xx:green:lan1";
gpios = <&chipcommon 15 GPIO_ACTIVE_LOW>;
linux,default-trigger = "none";
diff --git a/arch/arm/boot/dts/bcm47081-tplink-archer-c5-v2.dts b/arch/arm/boot/dts/bcm47081-tplink-archer-c5-v2.dts
index db9a37d70ef3..b6a5886698b2 100644
--- a/arch/arm/boot/dts/bcm47081-tplink-archer-c5-v2.dts
+++ b/arch/arm/boot/dts/bcm47081-tplink-archer-c5-v2.dts
@@ -23,50 +23,50 @@ memory at 0 {
leds {
compatible = "gpio-leds";
- 2ghz {
+ led-2ghz {
label = "bcm53xx:green:2ghz";
gpios = <&chipcommon 0 GPIO_ACTIVE_HIGH>;
};
- lan {
+ led-lan {
label = "bcm53xx:green:lan";
gpios = <&chipcommon 1 GPIO_ACTIVE_HIGH>;
};
- usb2-port1 {
+ led-usb2-port1 {
label = "bcm53xx:green:usb2-port1";
gpios = <&chipcommon 2 GPIO_ACTIVE_HIGH>;
trigger-sources = <&ohci_port1>, <&ehci_port1>;
linux,default-trigger = "usbport";
};
- power {
+ led-power {
label = "bcm53xx:green:power";
gpios = <&chipcommon 4 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "default-on";
};
- wan-green {
+ led-wan-green {
label = "bcm53xx:green:wan";
gpios = <&chipcommon 5 GPIO_ACTIVE_HIGH>;
};
- wps {
+ led-wps {
label = "bcm53xx:green:wps";
gpios = <&chipcommon 6 GPIO_ACTIVE_HIGH>;
};
- wan-amber {
+ led-wan-amber {
label = "bcm53xx:amber:wan";
gpios = <&chipcommon 8 GPIO_ACTIVE_HIGH>;
};
- 5ghz {
+ led-5ghz {
label = "bcm53xx:green:5ghz";
gpios = <&chipcommon 12 GPIO_ACTIVE_HIGH>;
};
- usb2-port2 {
+ led-usb2-port2 {
label = "bcm53xx:green:usb2-port2";
gpios = <&chipcommon 13 GPIO_ACTIVE_HIGH>;
trigger-sources = <&ohci_port2>, <&ehci_port2>;
diff --git a/arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts b/arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts
index f52a75c4ca09..4f44cb4df704 100644
--- a/arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts
+++ b/arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts
@@ -28,18 +28,18 @@ memory at 0 {
leds {
compatible = "gpio-leds";
- wps {
+ led-wps {
label = "bcm53xx:blue:wps";
gpios = <&chipcommon 1 GPIO_ACTIVE_LOW>;
};
- power {
+ led-power {
label = "bcm53xx:blue:power";
gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
linux,default-trigger = "default-on";
};
- wan {
+ led-wan {
label = "bcm53xx:red:wan";
gpios = <&chipcommon 5 GPIO_ACTIVE_LOW>;
};
diff --git a/arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts b/arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts
index 5ff6c588e16e..b7cd2faa30ce 100644
--- a/arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts
+++ b/arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts
@@ -28,48 +28,48 @@ memory at 0 {
leds {
compatible = "gpio-leds";
- usb {
+ led-usb {
label = "bcm53xx:green:usb";
gpios = <&chipcommon 4 GPIO_ACTIVE_HIGH>;
};
- power-amber {
+ led-power-amber {
label = "bcm53xx:amber:power";
gpios = <&chipcommon 5 GPIO_ACTIVE_HIGH>;
};
- power-white {
+ led-power-white {
label = "bcm53xx:white:power";
gpios = <&chipcommon 6 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "default-on";
};
- router-amber {
+ led-router-amber {
label = "bcm53xx:amber:router";
gpios = <&chipcommon 7 GPIO_ACTIVE_HIGH>;
};
- router-white {
+ led-router-white {
label = "bcm53xx:white:router";
gpios = <&chipcommon 8 GPIO_ACTIVE_HIGH>;
};
- wan-amber {
+ led-wan-amber {
label = "bcm53xx:amber:wan";
gpios = <&chipcommon 9 GPIO_ACTIVE_HIGH>;
};
- wan-white {
+ led-wan-white {
label = "bcm53xx:white:wan";
gpios = <&chipcommon 10 GPIO_ACTIVE_HIGH>;
};
- wireless-amber {
+ led-wireless-amber {
label = "bcm53xx:amber:wireless";
gpios = <&chipcommon 11 GPIO_ACTIVE_HIGH>;
};
- wireless-white {
+ led-wireless-white {
label = "bcm53xx:white:wireless";
gpios = <&chipcommon 12 GPIO_ACTIVE_HIGH>;
};
diff --git a/arch/arm/boot/dts/bcm4709-netgear-r7000.dts b/arch/arm/boot/dts/bcm4709-netgear-r7000.dts
index de961fbb6200..24ba8f8f9bf3 100644
--- a/arch/arm/boot/dts/bcm4709-netgear-r7000.dts
+++ b/arch/arm/boot/dts/bcm4709-netgear-r7000.dts
@@ -28,43 +28,43 @@ memory at 0 {
leds {
compatible = "gpio-leds";
- power-white {
+ led-power-white {
label = "bcm53xx:white:power";
gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>;
linux,default-trigger = "default-on";
};
- power-amber {
+ led-power-amber {
label = "bcm53xx:amber:power";
gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
};
- 5ghz {
+ led-5ghz {
label = "bcm53xx:white:5ghz";
gpios = <&chipcommon 12 GPIO_ACTIVE_LOW>;
};
- 2ghz {
+ led-2ghz {
label = "bcm53xx:white:2ghz";
gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>;
};
- wps {
+ led-wps {
label = "bcm53xx:white:wps";
gpios = <&chipcommon 14 GPIO_ACTIVE_HIGH>;
};
- wireless {
+ led-wireless {
label = "bcm53xx:white:wireless";
gpios = <&chipcommon 15 GPIO_ACTIVE_HIGH>;
};
- usb3 {
+ led-usb3 {
label = "bcm53xx:white:usb3";
gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>;
};
- usb2 {
+ led-usb2 {
label = "bcm53xx:white:usb2";
gpios = <&chipcommon 18 GPIO_ACTIVE_LOW>;
};
diff --git a/arch/arm/boot/dts/bcm4709-netgear-r8000.dts b/arch/arm/boot/dts/bcm4709-netgear-r8000.dts
index 087f7f60de18..14303ab521ea 100644
--- a/arch/arm/boot/dts/bcm4709-netgear-r8000.dts
+++ b/arch/arm/boot/dts/bcm4709-netgear-r8000.dts
@@ -39,59 +39,59 @@ memory at 0 {
leds {
compatible = "gpio-leds";
- power-white {
+ led-power-white {
label = "bcm53xx:white:power";
gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>;
linux,default-trigger = "default-on";
};
- power-amber {
+ led-power-amber {
label = "bcm53xx:amber:power";
gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
};
- wan-white {
+ led-wan-white {
label = "bcm53xx:white:wan";
gpios = <&chipcommon 8 GPIO_ACTIVE_LOW>;
linux,default-trigger = "default-on";
};
- wan-amber {
+ led-wan-amber {
label = "bcm53xx:amber:wan";
gpios = <&chipcommon 9 GPIO_ACTIVE_HIGH>;
};
- 5ghz-1 {
+ led-5ghz-1 {
label = "bcm53xx:white:5ghz-1";
gpios = <&chipcommon 12 GPIO_ACTIVE_LOW>;
};
- 2ghz {
+ led-2ghz {
label = "bcm53xx:white:2ghz";
gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>;
};
- wireless {
+ led-wireless {
label = "bcm53xx:white:wireless";
gpios = <&chipcommon 14 GPIO_ACTIVE_HIGH>;
};
- wps {
+ led-wps {
label = "bcm53xx:white:wps";
gpios = <&chipcommon 15 GPIO_ACTIVE_HIGH>;
};
- 5ghz-2 {
+ led-5ghz-2 {
label = "bcm53xx:white:5ghz-2";
gpios = <&chipcommon 16 GPIO_ACTIVE_LOW>;
};
- usb3 {
+ led-usb3 {
label = "bcm53xx:white:usb3";
gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>;
};
- usb2 {
+ led-usb2 {
label = "bcm53xx:white:usb2";
gpios = <&chipcommon 18 GPIO_ACTIVE_LOW>;
};
diff --git a/arch/arm/boot/dts/bcm4709-tplink-archer-c9-v1.dts b/arch/arm/boot/dts/bcm4709-tplink-archer-c9-v1.dts
index 2cfb105f631a..5a8b2b1567e6 100644
--- a/arch/arm/boot/dts/bcm4709-tplink-archer-c9-v1.dts
+++ b/arch/arm/boot/dts/bcm4709-tplink-archer-c9-v1.dts
@@ -23,27 +23,27 @@ memory at 0 {
leds {
compatible = "gpio-leds";
- lan {
+ led-lan {
label = "bcm53xx:blue:lan";
gpios = <&chipcommon 1 GPIO_ACTIVE_HIGH>;
};
- wps {
+ led-wps {
label = "bcm53xx:blue:wps";
gpios = <&chipcommon 2 GPIO_ACTIVE_HIGH>;
};
- 2ghz {
+ led-2ghz {
label = "bcm53xx:blue:2ghz";
gpios = <&chipcommon 4 GPIO_ACTIVE_HIGH>;
};
- 5ghz {
+ led-5ghz {
label = "bcm53xx:blue:5ghz";
gpios = <&chipcommon 5 GPIO_ACTIVE_HIGH>;
};
- usb3 {
+ led-usb3 {
label = "bcm53xx:blue:usb3";
gpios = <&chipcommon 6 GPIO_ACTIVE_HIGH>;
trigger-sources = <&ohci_port1>, <&ehci_port1>,
@@ -51,24 +51,24 @@ usb3 {
linux,default-trigger = "usbport";
};
- usb2 {
+ led-usb2 {
label = "bcm53xx:blue:usb2";
gpios = <&chipcommon 7 GPIO_ACTIVE_HIGH>;
trigger-sources = <&ohci_port2>, <&ehci_port2>;
linux,default-trigger = "usbport";
};
- wan-blue {
+ led-wan-blue {
label = "bcm53xx:blue:wan";
gpios = <&chipcommon 14 GPIO_ACTIVE_HIGH>;
};
- wan-amber {
+ led-wan-amber {
label = "bcm53xx:amber:wan";
gpios = <&chipcommon 15 GPIO_ACTIVE_HIGH>;
};
- power {
+ led-power {
label = "bcm53xx:blue:power";
gpios = <&chipcommon 18 GPIO_ACTIVE_LOW>;
linux,default-trigger = "default-on";
diff --git a/arch/arm/boot/dts/bcm47094-asus-rt-ac88u.dts b/arch/arm/boot/dts/bcm47094-asus-rt-ac88u.dts
index a5fec56d11c0..a50ff686b557 100644
--- a/arch/arm/boot/dts/bcm47094-asus-rt-ac88u.dts
+++ b/arch/arm/boot/dts/bcm47094-asus-rt-ac88u.dts
@@ -33,37 +33,37 @@ et1macaddr: et1macaddr {
leds {
compatible = "gpio-leds";
- power {
+ led-power {
label = "white:power";
gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
linux,default-trigger = "default-on";
};
- wan-red {
+ led-wan-red {
label = "red:wan";
gpios = <&chipcommon 5 GPIO_ACTIVE_HIGH>;
};
- lan {
+ led-lan {
label = "white:lan";
gpios = <&chipcommon 21 GPIO_ACTIVE_LOW>;
};
- usb2 {
+ led-usb2 {
label = "white:usb2";
gpios = <&chipcommon 16 GPIO_ACTIVE_LOW>;
trigger-sources = <&ehci_port2>;
linux,default-trigger = "usbport";
};
- usb3 {
+ led-usb3 {
label = "white:usb3";
gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>;
trigger-sources = <&ehci_port1>, <&xhci_port1>;
linux,default-trigger = "usbport";
};
- wps {
+ led-wps {
label = "white:wps";
gpios = <&chipcommon 19 GPIO_ACTIVE_LOW>;
};
diff --git a/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts b/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts
index 2c38b642a8b8..555fbe41dd8f 100644
--- a/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts
+++ b/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts
@@ -43,28 +43,28 @@ partition at 0 {
leds {
compatible = "gpio-leds";
- power-white {
+ led-power-white {
label = "bcm53xx:white:power";
gpios = <&chipcommon 0 GPIO_ACTIVE_LOW>;
linux,default-trigger = "default-on";
};
- wan-white {
+ led-wan-white {
label = "bcm53xx:white:wan";
gpios = <&chipcommon 1 GPIO_ACTIVE_LOW>;
};
- power-amber {
+ led-power-amber {
label = "bcm53xx:amber:power";
gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>;
};
- wan-amber {
+ led-wan-amber {
label = "bcm53xx:amber:wan";
gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
};
- usb3-white {
+ led-usb3-white {
label = "bcm53xx:white:usb3";
gpios = <&chipcommon 8 GPIO_ACTIVE_LOW>;
trigger-sources = <&ohci_port1>, <&ehci_port1>,
@@ -72,12 +72,12 @@ usb3-white {
linux,default-trigger = "usbport";
};
- 2ghz {
+ led-2ghz {
label = "bcm53xx:white:2ghz";
gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>;
};
- 5ghz {
+ led-5ghz {
label = "bcm53xx:white:5ghz";
gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>;
};
diff --git a/arch/arm/boot/dts/bcm47094-dlink-dir-890l.dts b/arch/arm/boot/dts/bcm47094-dlink-dir-890l.dts
index c9f8acccf9a6..d945a20b06e0 100644
--- a/arch/arm/boot/dts/bcm47094-dlink-dir-890l.dts
+++ b/arch/arm/boot/dts/bcm47094-dlink-dir-890l.dts
@@ -41,47 +41,47 @@ leds {
*/
compatible = "gpio-leds";
- power-white {
+ led-power-white {
label = "bcm53xx:white:power";
gpios = <&chipcommon 0 GPIO_ACTIVE_LOW>;
linux,default-trigger = "default-on";
};
- wan-white {
+ led-wan-white {
label = "bcm53xx:white:wan";
gpios = <&chipcommon 1 GPIO_ACTIVE_LOW>;
};
- power-amber {
+ led-power-amber {
label = "bcm53xx:amber:power";
gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>;
};
- wan-amber {
+ led-wan-amber {
label = "bcm53xx:amber:wan";
gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
};
- usb3-white {
+ led-usb3-white {
label = "bcm53xx:white:usb3";
gpios = <&chipcommon 8 GPIO_ACTIVE_LOW>;
trigger-sources = <&xhci_port1>;
linux,default-trigger = "usbport";
};
- usb2-white {
+ led-usb2-white {
label = "bcm53xx:white:usb2";
gpios = <&chipcommon 15 GPIO_ACTIVE_LOW>;
trigger-sources = <&ohci_port1>, <&ehci_port1>;
linux,default-trigger = "usbport";
};
- 2ghz {
+ led-2ghz {
label = "bcm53xx:white:2ghz";
gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>;
};
- 5ghz {
+ led-5ghz {
label = "bcm53xx:white:5ghz";
gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>;
};
diff --git a/arch/arm/boot/dts/bcm47094-linksys-panamera.dts b/arch/arm/boot/dts/bcm47094-linksys-panamera.dts
index 86c7cc0fa70e..d9a16a820e7f 100644
--- a/arch/arm/boot/dts/bcm47094-linksys-panamera.dts
+++ b/arch/arm/boot/dts/bcm47094-linksys-panamera.dts
@@ -52,19 +52,19 @@ button-reset {
leds {
compatible = "gpio-leds";
- wps {
+ led-wps {
label = "bcm53xx:white:wps";
gpios = <&chipcommon 22 GPIO_ACTIVE_LOW>;
};
- usb2 {
+ led-usb2 {
label = "bcm53xx:green:usb2";
gpios = <&chipcommon 1 GPIO_ACTIVE_LOW>;
trigger-sources = <&ohci_port2>, <&ehci_port2>;
linux,default-trigger = "usbport";
};
- usb3 {
+ led-usb3 {
label = "bcm53xx:green:usb3";
gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>;
trigger-sources = <&ohci_port1>, <&ehci_port1>,
@@ -72,58 +72,58 @@ usb3 {
linux,default-trigger = "usbport";
};
- power {
+ led-power {
label = "bcm53xx:white:power";
gpios = <&chipcommon 4 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "default-on";
};
- wifi-disabled {
+ led-wifi-disabled {
label = "bcm53xx:amber:wifi-disabled";
gpios = <&chipcommon 0 GPIO_ACTIVE_LOW>;
};
- wifi-enabled {
+ led-wifi-enabled {
label = "bcm53xx:white:wifi-enabled";
gpios = <&chipcommon 5 GPIO_ACTIVE_HIGH>;
};
- bluebar1 {
+ led-bluebar1 {
label = "bcm53xx:white:bluebar1";
gpios = <&chipcommon 11 GPIO_ACTIVE_HIGH>;
};
- bluebar2 {
+ led-bluebar2 {
label = "bcm53xx:white:bluebar2";
gpios = <&chipcommon 12 GPIO_ACTIVE_HIGH>;
};
- bluebar3 {
+ led-bluebar3 {
label = "bcm53xx:white:bluebar3";
gpios = <&chipcommon 15 GPIO_ACTIVE_LOW>;
};
- bluebar4 {
+ led-bluebar4 {
label = "bcm53xx:white:bluebar4";
gpios = <&chipcommon 18 GPIO_ACTIVE_HIGH>;
};
- bluebar5 {
+ led-bluebar5 {
label = "bcm53xx:white:bluebar5";
gpios = <&chipcommon 19 GPIO_ACTIVE_HIGH>;
};
- bluebar6 {
+ led-bluebar6 {
label = "bcm53xx:white:bluebar6";
gpios = <&chipcommon 20 GPIO_ACTIVE_HIGH>;
};
- bluebar7 {
+ led-bluebar7 {
label = "bcm53xx:white:bluebar7";
gpios = <&chipcommon 21 GPIO_ACTIVE_HIGH>;
};
- bluebar8 {
+ led-bluebar8 {
label = "bcm53xx:white:bluebar8";
gpios = <&chipcommon 8 GPIO_ACTIVE_HIGH>;
};
diff --git a/arch/arm/boot/dts/bcm47094-luxul-abr-4500.dts b/arch/arm/boot/dts/bcm47094-luxul-abr-4500.dts
index 9ad15bcae1ca..41a0722fa64a 100644
--- a/arch/arm/boot/dts/bcm47094-luxul-abr-4500.dts
+++ b/arch/arm/boot/dts/bcm47094-luxul-abr-4500.dts
@@ -30,13 +30,13 @@ nvram at 1eff0000 {
leds {
compatible = "gpio-leds";
- status {
+ led-status {
label = "bcm53xx:green:status";
gpios = <&chipcommon 20 GPIO_ACTIVE_LOW>;
linux,default-trigger = "timer";
};
- usb3 {
+ led-usb3 {
label = "bcm53xx:green:usb3";
gpios = <&chipcommon 19 GPIO_ACTIVE_LOW>;
trigger-sources = <&ohci_port1>, <&ehci_port1>,
diff --git a/arch/arm/boot/dts/bcm47094-luxul-xap-1610.dts b/arch/arm/boot/dts/bcm47094-luxul-xap-1610.dts
index ee24d3768536..c56c7e366848 100644
--- a/arch/arm/boot/dts/bcm47094-luxul-xap-1610.dts
+++ b/arch/arm/boot/dts/bcm47094-luxul-xap-1610.dts
@@ -23,18 +23,18 @@ memory at 0 {
leds {
compatible = "gpio-leds";
- status {
+ led-status {
label = "bcm53xx:green:status";
gpios = <&chipcommon 0 GPIO_ACTIVE_LOW>;
linux,default-trigger = "timer";
};
- 2ghz {
+ led-2ghz {
label = "bcm53xx:blue:2ghz";
gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>;
};
- 5ghz {
+ led-5ghz {
label = "bcm53xx:blue:5ghz";
gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>;
};
diff --git a/arch/arm/boot/dts/bcm47094-luxul-xbr-4500.dts b/arch/arm/boot/dts/bcm47094-luxul-xbr-4500.dts
index 6549d07b9887..1b5c91a524ac 100644
--- a/arch/arm/boot/dts/bcm47094-luxul-xbr-4500.dts
+++ b/arch/arm/boot/dts/bcm47094-luxul-xbr-4500.dts
@@ -30,13 +30,13 @@ nvram at 1eff0000 {
leds {
compatible = "gpio-leds";
- status {
+ led-status {
label = "bcm53xx:green:status";
gpios = <&chipcommon 20 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "timer";
};
- usb3 {
+ led-usb3 {
label = "bcm53xx:green:usb3";
gpios = <&chipcommon 19 GPIO_ACTIVE_HIGH>;
trigger-sources = <&ohci_port1>, <&ehci_port1>,
diff --git a/arch/arm/boot/dts/bcm47094-luxul-xwc-2000.dts b/arch/arm/boot/dts/bcm47094-luxul-xwc-2000.dts
index 654fcce9fded..739063b77b1f 100644
--- a/arch/arm/boot/dts/bcm47094-luxul-xwc-2000.dts
+++ b/arch/arm/boot/dts/bcm47094-luxul-xwc-2000.dts
@@ -25,7 +25,7 @@ memory at 0 {
leds {
compatible = "gpio-leds";
- status {
+ led-status {
label = "bcm53xx:green:status";
gpios = <&chipcommon 18 GPIO_ACTIVE_LOW>;
linux,default-trigger = "timer";
diff --git a/arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts b/arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts
index bf053a2fcc7c..7afc68d5d2c2 100644
--- a/arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts
+++ b/arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts
@@ -30,38 +30,38 @@ nvram at 1eff0000 {
leds {
compatible = "gpio-leds";
- power {
+ led-power {
label = "bcm53xx:green:power";
gpios = <&chipcommon 0 GPIO_ACTIVE_LOW>;
linux,default-trigger = "default-on";
};
- lan3 {
+ led-lan3 {
label = "bcm53xx:green:lan3";
gpios = <&chipcommon 1 GPIO_ACTIVE_LOW>;
};
- lan4 {
+ led-lan4 {
label = "bcm53xx:green:lan4";
gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>;
};
- wan {
+ led-wan {
label = "bcm53xx:green:wan";
gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
};
- lan1 {
+ led-lan1 {
label = "bcm53xx:green:lan1";
gpios = <&chipcommon 4 GPIO_ACTIVE_LOW>;
};
- lan2 {
+ led-lan2 {
label = "bcm53xx:green:lan2";
gpios = <&chipcommon 6 GPIO_ACTIVE_LOW>;
};
- usb3 {
+ led-usb3 {
label = "bcm53xx:green:usb3";
gpios = <&chipcommon 8 GPIO_ACTIVE_LOW>;
trigger-sources = <&ohci_port1>, <&ehci_port1>,
@@ -69,18 +69,18 @@ usb3 {
linux,default-trigger = "usbport";
};
- status {
+ led-status {
label = "bcm53xx:green:status";
gpios = <&chipcommon 10 GPIO_ACTIVE_LOW>;
linux,default-trigger = "timer";
};
- 2ghz {
+ led-2ghz {
label = "bcm53xx:green:2ghz";
gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>;
};
- 5ghz {
+ led-5ghz {
label = "bcm53xx:green:5ghz";
gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>;
};
diff --git a/arch/arm/boot/dts/bcm47094-luxul-xwr-3150-v1.dts b/arch/arm/boot/dts/bcm47094-luxul-xwr-3150-v1.dts
index 78a90dd57a4e..60a2c441d5bd 100644
--- a/arch/arm/boot/dts/bcm47094-luxul-xwr-3150-v1.dts
+++ b/arch/arm/boot/dts/bcm47094-luxul-xwr-3150-v1.dts
@@ -33,13 +33,13 @@ et0macaddr: et0macaddr {
leds {
compatible = "gpio-leds";
- power {
+ led-power {
label = "bcm53xx:green:power";
gpios = <&chipcommon 0 GPIO_ACTIVE_LOW>;
linux,default-trigger = "default-on";
};
- usb3 {
+ led-usb3 {
label = "bcm53xx:green:usb3";
gpios = <&chipcommon 8 GPIO_ACTIVE_LOW>;
trigger-sources = <&ohci_port1>, <&ehci_port1>,
@@ -47,18 +47,18 @@ usb3 {
linux,default-trigger = "usbport";
};
- status {
+ led-status {
label = "bcm53xx:green:status";
gpios = <&chipcommon 10 GPIO_ACTIVE_LOW>;
linux,default-trigger = "timer";
};
- 2ghz {
+ led-2ghz {
label = "bcm53xx:green:2ghz";
gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>;
};
- 5ghz {
+ led-5ghz {
label = "bcm53xx:green:5ghz";
gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>;
};
diff --git a/arch/arm/boot/dts/bcm47094-netgear-r8500.dts b/arch/arm/boot/dts/bcm47094-netgear-r8500.dts
index f850dce37b20..76d562610654 100644
--- a/arch/arm/boot/dts/bcm47094-netgear-r8500.dts
+++ b/arch/arm/boot/dts/bcm47094-netgear-r8500.dts
@@ -25,38 +25,38 @@ memory at 0 {
leds {
compatible = "gpio-leds";
- power0 {
+ led-power0 {
label = "bcm53xx:white:power";
gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>;
linux,default-trigger = "default-on";
};
- power1 {
+ led-power1 {
label = "bcm53xx:amber:power";
gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
};
- 5ghz-1 {
+ led-5ghz-1 {
label = "bcm53xx:white:5ghz-1";
gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
};
- 5ghz-2 {
+ led-5ghz-2 {
label = "bcm53xx:white:5ghz-2";
gpios = <&chipcommon 12 GPIO_ACTIVE_LOW>;
};
- 2ghz {
+ led-2ghz {
label = "bcm53xx:white:2ghz";
gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>;
};
- usb2 {
+ led-usb2 {
label = "bcm53xx:white:usb2";
gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>;
};
- usb3 {
+ led-usb3 {
label = "bcm53xx:white:usb3";
gpios = <&chipcommon 18 GPIO_ACTIVE_LOW>;
};
diff --git a/arch/arm/boot/dts/bcm47189-luxul-xap-1440.dts b/arch/arm/boot/dts/bcm47189-luxul-xap-1440.dts
index e20b6d2eb274..0734aa249b8e 100644
--- a/arch/arm/boot/dts/bcm47189-luxul-xap-1440.dts
+++ b/arch/arm/boot/dts/bcm47189-luxul-xap-1440.dts
@@ -23,13 +23,13 @@ memory at 0 {
leds {
compatible = "gpio-leds";
- wlan {
+ led-wlan {
label = "bcm53xx:blue:wlan";
gpios = <&chipcommon 10 GPIO_ACTIVE_LOW>;
linux,default-trigger = "default-off";
};
- system {
+ led-system {
label = "bcm53xx:green:system";
gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
linux,default-trigger = "timer";
diff --git a/arch/arm/boot/dts/bcm47189-luxul-xap-810.dts b/arch/arm/boot/dts/bcm47189-luxul-xap-810.dts
index 9d863570fcf3..e6fb6cbe6963 100644
--- a/arch/arm/boot/dts/bcm47189-luxul-xap-810.dts
+++ b/arch/arm/boot/dts/bcm47189-luxul-xap-810.dts
@@ -20,26 +20,26 @@ memory at 0 {
reg = <0x00000000 0x08000000>;
};
- leds {
+ leds-0 {
compatible = "gpio-leds";
- 5ghz {
+ led-5ghz {
label = "bcm53xx:blue:5ghz";
gpios = <&chipcommon 11 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "default-off";
};
- system {
+ led-system {
label = "bcm53xx:green:system";
gpios = <&chipcommon 15 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "timer";
};
};
- pcie0_leds {
+ leds-1 {
compatible = "gpio-leds";
- 2ghz {
+ led-2ghz {
label = "bcm53xx:blue:2ghz";
gpios = <&pcie0_chipcommon 3 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "default-off";
diff --git a/arch/arm/boot/dts/bcm47189-tenda-ac9.dts b/arch/arm/boot/dts/bcm47189-tenda-ac9.dts
index 55b92645b0f1..dab2e5f63a72 100644
--- a/arch/arm/boot/dts/bcm47189-tenda-ac9.dts
+++ b/arch/arm/boot/dts/bcm47189-tenda-ac9.dts
@@ -20,37 +20,37 @@ memory at 0 {
reg = <0x00000000 0x08000000>;
};
- leds {
+ leds-0 {
compatible = "gpio-leds";
- usb {
+ led-usb {
label = "bcm53xx:blue:usb";
gpios = <&chipcommon 1 GPIO_ACTIVE_HIGH>;
trigger-sources = <&ohci_port1>, <&ehci_port1>;
linux,default-trigger = "usbport";
};
- wps {
+ led-wps {
label = "bcm53xx:blue:wps";
gpios = <&chipcommon 10 GPIO_ACTIVE_HIGH>;
};
- 5ghz {
+ led-5ghz {
label = "bcm53xx:blue:5ghz";
gpios = <&chipcommon 11 GPIO_ACTIVE_HIGH>;
};
- system {
+ led-system {
label = "bcm53xx:blue:system";
gpios = <&chipcommon 15 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "timer";
};
};
- pcie0_leds {
+ leds-1 {
compatible = "gpio-leds";
- 2ghz {
+ led-2ghz {
label = "bcm53xx:blue:2ghz";
gpios = <&pcie0_chipcommon 3 GPIO_ACTIVE_HIGH>;
};
diff --git a/arch/arm/boot/dts/bcm53016-dlink-dwl-8610ap.dts b/arch/arm/boot/dts/bcm53016-dlink-dwl-8610ap.dts
index b44a24448386..c1f54391746f 100644
--- a/arch/arm/boot/dts/bcm53016-dlink-dwl-8610ap.dts
+++ b/arch/arm/boot/dts/bcm53016-dlink-dwl-8610ap.dts
@@ -20,14 +20,14 @@ memory at 0 {
leds {
compatible = "gpio-leds";
- power {
+ led-power {
function = LED_FUNCTION_POWER;
color = <LED_COLOR_ID_GREEN>;
gpios = <&chipcommon 0 GPIO_ACTIVE_LOW>;
default-state = "on";
};
- diag {
+ led-diag {
/* Actually "diag" unclear what this means */
function = LED_FUNCTION_INDICATOR;
color = <LED_COLOR_ID_RED>;
@@ -36,13 +36,13 @@ diag {
linux,default-trigger = "heartbeat";
};
- wlan-2g {
+ led-wlan-2g {
function = LED_FUNCTION_WLAN;
color = <LED_COLOR_ID_GREEN>;
gpios = <&chipcommon 5 GPIO_ACTIVE_LOW>;
};
- wlan-5g {
+ led-wlan-5g {
function = LED_FUNCTION_WLAN;
color = <LED_COLOR_ID_GREEN>;
gpios = <&chipcommon 8 GPIO_ACTIVE_LOW>;
diff --git a/arch/arm/boot/dts/bcm53016-meraki-mr32.dts b/arch/arm/boot/dts/bcm53016-meraki-mr32.dts
index e678bc03d816..46c2c93b01d8 100644
--- a/arch/arm/boot/dts/bcm53016-meraki-mr32.dts
+++ b/arch/arm/boot/dts/bcm53016-meraki-mr32.dts
@@ -58,7 +58,7 @@ button-restart {
pwm-leds {
compatible = "pwm-leds";
- red {
+ led-0 {
/* SYS-LED 1 - Tricolor */
function = LED_FUNCTION_INDICATOR;
color = <LED_COLOR_ID_RED>;
@@ -66,7 +66,7 @@ red {
max-brightness = <255>;
};
- green {
+ led-1 {
/* SYS-LED 1 - Tricolor */
function = LED_FUNCTION_POWER;
color = <LED_COLOR_ID_GREEN>;
@@ -74,7 +74,7 @@ green {
max-brightness = <255>;
};
- blue {
+ led-2 {
/* SYS-LED 1 - Tricolor */
function = LED_FUNCTION_INDICATOR;
color = <LED_COLOR_ID_BLUE>;
diff --git a/arch/arm/boot/dts/bcm947189acdbmr.dts b/arch/arm/boot/dts/bcm947189acdbmr.dts
index 16e70a264faf..3709baa2376f 100644
--- a/arch/arm/boot/dts/bcm947189acdbmr.dts
+++ b/arch/arm/boot/dts/bcm947189acdbmr.dts
@@ -25,17 +25,17 @@ memory at 0 {
leds {
compatible = "gpio-leds";
- wps {
+ led-wps {
label = "bcm53xx:blue:wps";
gpios = <&chipcommon 10 GPIO_ACTIVE_HIGH>;
};
- 5ghz {
+ led-5ghz {
label = "bcm53xx:blue:5ghz";
gpios = <&chipcommon 11 GPIO_ACTIVE_HIGH>;
};
- 2ghz {
+ led-2ghz {
label = "bcm53xx:blue:2ghz";
gpios = <&chipcommon 12 GPIO_ACTIVE_HIGH>;
};
--
2.34.1
More information about the linux-arm-kernel
mailing list