[PATCH v13 2/2] PCI: endpoint: pci-epf-vntb: using platform MSI as doorbell
Manivannan Sadhasivam
manivannan.sadhasivam at linaro.org
Thu Nov 24 01:00:28 PST 2022
On Thu, Nov 24, 2022 at 12:50:36AM -0500, Frank Li wrote:
> ┌────────────┐ ┌───────────────────────────────────┐ ┌────────────────┐
> │ │ │ │ │ │
> │ │ │ PCI Endpoint │ │ PCI Host │
> │ │ │ │ │ │
> │ │◄──┤ 1.platform_msi_domain_alloc_irqs()│ │ │
> │ │ │ │ │ │
> │ MSI ├──►│ 2.write_msi_msg() ├──►├─BAR<n> │
> │ Controller │ │ update doorbell register address│ │ │
> │ │ │ for BAR │ │ │
> │ │ │ │ │ 3. Write BAR<n>│
> │ │◄──┼───────────────────────────────────┼───┤ │
> │ │ │ │ │ │
> │ ├──►│ 4.Irq Handle │ │ │
> │ │ │ │ │ │
> │ │ │ │ │ │
> └────────────┘ └───────────────────────────────────┘ └────────────────┘
>
There are at least couple of BAR regions used in this patch but they were not
mentioned in the above diagram.
The subject should be:
"PCI: endpoint: pci-epf-vntb: Use EP MSI controller to handle DB from host"
> Using platform MSI interrupt controller as endpoint(EP)'s doorbell.
>
Above line is not needed.
> The memory assigned for BAR region by the PCI host is mapped to the
Which BAR? (BAR 1 aka. DB BAR)? There are multiple BAR regions exposed by this function driver.
> message address of platform msi interrupt controller in PCI Endpoint.
s/msi/MSI. Also, use either Endpoint or EP, pick one but not both.
> Such that, whenever the PCI host writes to the BAR region, it will
> trigger an IRQ in the EP.
>
> Basic working follow as
"work flow is"?
> 1. EP function driver call platform_msi_domain_alloc_irqs() alloc a
pci-epf-vntb function driver calls platform_msi_domain_alloc_irqs() to allocate
MSI's from the platform MSI controller.
> MSI irq from MSI controller with call back function write_msi_msg();
> 2. write_msg_msg will config BAR and map to address defined in msi_msg;
The epf_ntb_write_msi_msg() passed as a callback will write the offset of the
MSI controller's MSI address dedicated for each MSI to the doorbell register
db_offset and also writes the MSI data to db_data register in the CTRL BAR
region.
> 3. Host side trigger an IRQ at Endpoint by write to BAR region.
>
Finally, the host can trigger doorbell by reading the offset of the doorbell
from db_offset register and writing the data read from db_data register in CTRL
BAR region to the computed address in the DB BAR region.
> Add MSI doorbell support for pci-epf-vntb. Query if system has an MSI
> controller. Set up doorbell address according to struct msi_msg.
>
> So PCI host can write this doorbell address to trigger EP side's IRQ.
>
> If no MSI controller exists, fall back to software polling.
>
"Add doorbell support to pci-epf-vntb function driver making use of the platform
MSI controller. If the MSI controller is not available, fallback to the polling
method."
Also, please move this paragraph to the beginning of the description.
> Signed-off-by: Frank Li <Frank.Li at nxp.com>
> ---
> drivers/pci/endpoint/functions/pci-epf-vntb.c | 146 +++++++++++++++---
> 1 file changed, 125 insertions(+), 21 deletions(-)
>
> diff --git a/drivers/pci/endpoint/functions/pci-epf-vntb.c b/drivers/pci/endpoint/functions/pci-epf-vntb.c
> index 0d744975f815..f770a068e58c 100644
> --- a/drivers/pci/endpoint/functions/pci-epf-vntb.c
> +++ b/drivers/pci/endpoint/functions/pci-epf-vntb.c
> @@ -44,6 +44,7 @@
> #include <linux/pci-epc.h>
> #include <linux/pci-epf.h>
> #include <linux/ntb.h>
> +#include <linux/msi.h>
>
> static struct workqueue_struct *kpcintb_workqueue;
>
> @@ -137,11 +138,14 @@ struct epf_ntb {
> struct epf_ntb_ctrl *reg;
>
> u32 *epf_db;
> + phys_addr_t epf_db_phys;
>
> phys_addr_t vpci_mw_phy[MAX_MW];
> void __iomem *vpci_mw_addr[MAX_MW];
>
> struct delayed_work cmd_handler;
> +
> + int msi_virqbase;
> };
You should add kernel doc comments for this struct in a separate patch. It will
help in understanding the driver better.
>
> #define to_epf_ntb(epf_group) container_of((epf_group), struct epf_ntb, group)
> @@ -256,11 +260,13 @@ static void epf_ntb_cmd_handler(struct work_struct *work)
>
> ntb = container_of(work, struct epf_ntb, cmd_handler.work);
>
> - for (i = 1; i < ntb->db_count; i++) {
> - if (ntb->epf_db[i]) {
> - ntb->db |= 1 << (i - 1);
> - ntb_db_event(&ntb->ntb, i);
> - ntb->epf_db[i] = 0;
A comment here stating that polling is implemented would be better.
> + if (!ntb->epf_db_phys) {
> + for (i = 1; i < ntb->db_count; i++) {
> + if (ntb->epf_db[i]) {
> + ntb->db |= 1 << (i - 1);
> + ntb_db_event(&ntb->ntb, i);
> + ntb->epf_db[i] = 0;
> + }
> }
> }
>
> @@ -518,6 +524,28 @@ static int epf_ntb_configure_interrupt(struct epf_ntb *ntb)
> return 0;
> }
>
> +static int epf_ntb_db_size(struct epf_ntb *ntb)
> +{
> + const struct pci_epc_features *epc_features;
> + size_t size = sizeof(u32) * ntb->db_count;
> + u32 align;
> +
> + epc_features = pci_epc_get_features(ntb->epf->epc,
> + ntb->epf->func_no,
> + ntb->epf->vfunc_no);
> + align = epc_features->align;
> +
> + if (size < 128)
Shouldn't this be (size > 128)?
> + size = 128;
> +
> + if (align)
> + size = ALIGN(size, align);
> + else
> + size = roundup_pow_of_two(size);
> +
> + return size;
> +}
> +
> /**
> * epf_ntb_db_bar_init() - Configure Doorbell window BARs
> * @ntb: NTB device that facilitates communication between HOST and VHOST
> @@ -539,27 +567,26 @@ static int epf_ntb_db_bar_init(struct epf_ntb *ntb)
> ntb->epf->func_no,
> ntb->epf->vfunc_no);
> align = epc_features->align;
> -
> - if (size < 128)
> - size = 128;
> -
> - if (align)
> - size = ALIGN(size, align);
> - else
> - size = roundup_pow_of_two(size);
> + size = epf_ntb_db_size(ntb);
>
> barno = ntb->epf_ntb_bar[BAR_DB];
> + epf_bar = &ntb->epf->bar[barno];
>
> - mw_addr = pci_epf_alloc_space(ntb->epf, size, barno, align, 0);
> - if (!mw_addr) {
> - dev_err(dev, "Failed to allocate OB address\n");
> - return -ENOMEM;
> + if (ntb->epf_db_phys) {
> + mw_addr = NULL;
> + epf_bar->phys_addr = ntb->epf_db_phys;
> + epf_bar->barno = barno;
> + epf_bar->size = size;
> + } else {
> + mw_addr = pci_epf_alloc_space(ntb->epf, size, barno, align, 0);
> + if (!mw_addr) {
> + dev_err(dev, "Failed to allocate doorbell address\n");
> + return -ENOMEM;
> + }
> }
>
> ntb->epf_db = mw_addr;
>
> - epf_bar = &ntb->epf->bar[barno];
> -
> ret = pci_epc_set_bar(ntb->epf->epc, ntb->epf->func_no, ntb->epf->vfunc_no, epf_bar);
> if (ret) {
> dev_err(dev, "Doorbell BAR set failed\n");
> @@ -728,6 +755,82 @@ static int epf_ntb_init_epc_bar(struct epf_ntb *ntb)
> return 0;
> }
>
> +static irqreturn_t epf_ntb_interrupt_handler(int irq, void *data)
Shouldn't this function also be guarded?
> +{
> + struct epf_ntb *ntb = data;
> + int index;
> +
> + index = irq - ntb->msi_virqbase;
> + ntb->db |= 1 << (index - 1);
> + ntb_db_event(&ntb->ntb, index);
> +
> + return IRQ_HANDLED;
> +}
> +
> +#ifdef CONFIG_GENERIC_MSI_IRQ_DOMAIN
It'd be better to use the relevant commit description as a comment here.
> +static void epf_ntb_write_msi_msg(struct msi_desc *desc, struct msi_msg *msg)
> +{
> + struct epf_ntb *ntb = dev_get_drvdata(desc->dev);
> + struct epf_ntb_ctrl *reg = ntb->reg;
> + int size = epf_ntb_db_size(ntb);
> + u64 addr;
> +
> + addr = msg->address_hi;
> + addr <<= 32;
> + addr |= msg->address_lo;
> +
> + reg->db_data[desc->msi_index] = msg->data;
> +
A comment stating that the base address to be used as the DB BAR is set here
would be useful too.
> + if (!desc->msi_index)
> + ntb->epf_db_phys = round_down(addr, size);
> +
> + reg->db_offset[desc->msi_index] = addr - ntb->epf_db_phys;
> +}
> +
> +static void epf_ntb_epc_msi_init(struct epf_ntb *ntb)
> +{
> + struct device *dev = &ntb->epf->dev;
> + struct irq_domain *domain;
> + int virq;
> + int ret;
> + int i;
> +
> + domain = dev_get_msi_domain(ntb->epf->epc->dev.parent);
> + if (!domain)
> + return;
> +
> + dev_set_msi_domain(dev, domain);
> +
> + if (platform_msi_domain_alloc_irqs(&ntb->epf->dev,
> + ntb->db_count,
> + epf_ntb_write_msi_msg)) {
Please wrap above two in a single line till 100 column limit.
> + dev_err(dev, "Can't allocate MSI, falling back to polling mode\n");
This should be dev_dbg().
> + return;
> + }
> + dev_dbg(dev, "Using MSI as doorbell\n");
> +
> + for (i = 0; i < ntb->db_count; i++) {
> + virq = msi_get_virq(dev, i);
> + ret = devm_request_irq(dev, virq,
> + epf_ntb_interrupt_handler, 0,
> + "pci_epf_vntb", ntb);
> +
> + if (ret) {
> + dev_err(dev, "Failed to request doorbell IRQ! Falling back to polling mode");
Again, dev_dbg()
> + ntb->epf_db_phys = 0;
> + platform_msi_domain_free_irqs(&ntb->epf->dev);
> + break;
> + }
> +
> + if (!i)
> + ntb->msi_virqbase = virq; /* msi start virq number */
> + }
> +}
> +#else
Since this is not exposed as an API, just end the ifdef here and...
> +static void epf_ntb_epc_msi_init(struct epf_ntb *ntb)
> +{
> +}
> +#endif /* CONFIG_GENERIC_MSI_IRQ_DOMAIN */
> /**
> * epf_ntb_epc_init() - Initialize NTB interface
> * @ntb: NTB device that facilitates communication between HOST and VHOST
> @@ -1336,14 +1439,15 @@ static int epf_ntb_bind(struct pci_epf *epf)
> goto err_bar_alloc;
> }
>
> + epf_set_drvdata(epf, ntb);
> + epf_ntb_epc_msi_init(ntb);
Guard this function instead:
#ifdef CONFIG_GENERIC_MSI_IRQ_DOMAIN
epf_ntb_epc_msi_init(ntb);
#endif
Thanks,
Mani
> +
> ret = epf_ntb_epc_init(ntb);
> if (ret) {
> dev_err(dev, "Failed to initialize EPC\n");
> goto err_bar_alloc;
> }
>
> - epf_set_drvdata(epf, ntb);
> -
> pci_space[0] = (ntb->vntb_pid << 16) | ntb->vntb_vid;
> pci_vntb_table[0].vendor = ntb->vntb_vid;
> pci_vntb_table[0].device = ntb->vntb_pid;
> --
> 2.34.1
>
--
மணிவண்ணன் சதாசிவம்
More information about the linux-arm-kernel
mailing list