[PATCH V5 1/4] clk: meson: S4: add support for Amlogic S4 SoC PLL clock driver and bindings

[Krzysztof Kozlowski]

On 23/11/2022 03:13, Yu Tu wrote:
> Add the S4 PLL clock controller found and bindings in the s4 SoC family.
> 
> Signed-off-by: Yu Tu <yu.tu at amlogic.com>
> ---
>  .../bindings/clock/amlogic,s4-pll-clkc.yaml   |  51 +

This is v5 and still bindings are here? Bindings are always separate
patches. Use subject prefixes matching the subsystem (git log --oneline
-- ...).

And this was split, wasn't it? What happened here?!?


>  MAINTAINERS                                   |   1 +
>  drivers/clk/meson/Kconfig                     |  13 +
>  drivers/clk/meson/Makefile                    |   1 +
>  drivers/clk/meson/s4-pll.c                    | 875 ++++++++++++++++++
>  drivers/clk/meson/s4-pll.h                    |  88 ++
>  .../dt-bindings/clock/amlogic,s4-pll-clkc.h   |  30 +
>  7 files changed, 1059 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/clock/amlogic,s4-pll-clkc.yaml
>  create mode 100644 drivers/clk/meson/s4-pll.c
>  create mode 100644 drivers/clk/meson/s4-pll.h
>  create mode 100644 include/dt-bindings/clock/amlogic,s4-pll-clkc.h
> 
> diff --git a/Documentation/devicetree/bindings/clock/amlogic,s4-pll-clkc.yaml b/Documentation/devicetree/bindings/clock/amlogic,s4-pll-clkc.yaml
> new file mode 100644
> index 000000000000..fd517e8ef14f
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/clock/amlogic,s4-pll-clkc.yaml
> @@ -0,0 +1,51 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/clock/amlogic,s4-pll-clkc.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Amlogic Meson S serials PLL Clock Controller
> +
> +maintainers:
> +  - Neil Armstrong <narmstrong at baylibre.com>
> +  - Jerome Brunet <jbrunet at baylibre.com>
> +  - Yu Tu <yu.hu at amlogic.com>
> +
One blank line.

> +
> +properties:
> +  compatible:
> +    const: amlogic,s4-pll-clkc
> +
> +  reg:
> +    maxItems: 1
> +
> +  clocks:
> +    maxItems: 1
> +
> +  clock-names:
> +    items:
> +      - const: xtal
> +
> +  "#clock-cells":
> +    const: 1
> +
> +required:
> +  - compatible
> +  - reg
> +  - clocks
> +  - clock-names
> +  - "#clock-cells"
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    clkc_pll: clock-controller at fe008000 {
> +      compatible = "amlogic,s4-pll-clkc";
> +      reg = <0xfe008000 0x1e8>;
> +      clocks = <&xtal>;
> +      clock-names = "xtal";
> +      #clock-cells = <1>;
> +    };


> +#endif /* __MESON_S4_PLL_H__ */
> diff --git a/include/dt-bindings/clock/amlogic,s4-pll-clkc.h b/include/dt-bindings/clock/amlogic,s4-pll-clkc.h
> new file mode 100644
> index 000000000000..345f87023886
> --- /dev/null
> +++ b/include/dt-bindings/clock/amlogic,s4-pll-clkc.h

This belongs to bindings patch, not driver.

> @@ -0,0 +1,30 @@
> +/* SPDX-License-Identifier: (GPL-2.0+ OR MIT) */
> +/*
> + * Copyright (c) 2021 Amlogic, Inc. All rights reserved.
> + * Author: Yu Tu <yu.tu at amlogic.com>
> + */
> +
> +#ifndef _DT_BINDINGS_CLOCK_AMLOGIC_S4_PLL_CLKC_H
> +#define _DT_BINDINGS_CLOCK_AMLOGIC_S4_PLL_CLKC_H
> +
> +/*
> + * CLKID index values
> + */
> +
> +#define CLKID_FIXED_PLL			1
> +#define CLKID_FCLK_DIV2			3

Indexes start from 0 and are incremented by 1. Not by 2.

NAK.

Best regards,
Krzysztof