[PATCH v2 2/2] phy: ti: phy-j721e-wiz: add j721s2-wiz-10g module support

Roger Quadros rogerq at kernel.org
Wed Nov 23 00:29:30 PST 2022



On 23/11/2022 05:24, Matt Ranostay wrote:
> Add support for j721s2-wiz-10g device which is similar to j721e-wiz-10g but
> uses clock-names interface versus explicitly defining clock nodes within
> device tree node.
> 
> Signed-off-by: Matt Ranostay <mranostay at ti.com>
> ---

Reviewed-by: Roger Quadros <rogerq at kernel.org>

>  drivers/phy/ti/phy-j721e-wiz.c | 16 ++++++++++++++++
>  1 file changed, 16 insertions(+)
> 
> diff --git a/drivers/phy/ti/phy-j721e-wiz.c b/drivers/phy/ti/phy-j721e-wiz.c
> index 141b51af4427..ddce5ef7711c 100644
> --- a/drivers/phy/ti/phy-j721e-wiz.c
> +++ b/drivers/phy/ti/phy-j721e-wiz.c
> @@ -322,6 +322,7 @@ enum wiz_type {
>  	AM64_WIZ_10G,
>  	J7200_WIZ_10G,  /* J7200 SR2.0 */
>  	J784S4_WIZ_10G,
> +	J721S2_WIZ_10G,
>  };
>  
>  struct wiz_data {
> @@ -1000,6 +1001,7 @@ static void wiz_clock_cleanup(struct wiz *wiz, struct device_node *node)
>  	case AM64_WIZ_10G:
>  	case J7200_WIZ_10G:
>  	case J784S4_WIZ_10G:
> +	case J721S2_WIZ_10G:
>  		of_clk_del_provider(dev->of_node);
>  		return;
>  	default:
> @@ -1132,6 +1134,7 @@ static int wiz_clock_init(struct wiz *wiz, struct device_node *node)
>  	case AM64_WIZ_10G:
>  	case J7200_WIZ_10G:
>  	case J784S4_WIZ_10G:
> +	case J721S2_WIZ_10G:
>  		ret = wiz_clock_register(wiz);
>  		if (ret)
>  			dev_err(dev, "Failed to register wiz clocks\n");
> @@ -1214,6 +1217,7 @@ static int wiz_phy_fullrt_div(struct wiz *wiz, int lane)
>  		break;
>  	case J721E_WIZ_10G:
>  	case J7200_WIZ_10G:
> +	case J721S2_WIZ_10G:
>  		if (wiz->lane_phy_type[lane] == PHY_TYPE_SGMII)
>  			return regmap_field_write(wiz->p0_fullrt_div[lane], 0x2);
>  		break;
> @@ -1318,6 +1322,15 @@ static struct wiz_data j784s4_10g_data = {
>  	.clk_div_sel_num = WIZ_DIV_NUM_CLOCKS_10G,
>  };
>  
> +static struct wiz_data j721s2_10g_data = {
> +	.type = J721S2_WIZ_10G,
> +	.pll0_refclk_mux_sel = &pll0_refclk_mux_sel,
> +	.pll1_refclk_mux_sel = &pll1_refclk_mux_sel,
> +	.refclk_dig_sel = &refclk_dig_sel_10g,
> +	.clk_mux_sel = clk_mux_sel_10g,
> +	.clk_div_sel_num = WIZ_DIV_NUM_CLOCKS_10G,
> +};
> +
>  static const struct of_device_id wiz_id_table[] = {
>  	{
>  		.compatible = "ti,j721e-wiz-16g", .data = &j721e_16g_data,
> @@ -1334,6 +1347,9 @@ static const struct of_device_id wiz_id_table[] = {
>  	{
>  		.compatible = "ti,j784s4-wiz-10g", .data = &j784s4_10g_data,
>  	},
> +	{
> +		.compatible = "ti,j721s2-wiz-10g", .data = &j721s2_10g_data,
> +	},
>  	{}
>  };
>  MODULE_DEVICE_TABLE(of, wiz_id_table);

--
cheers,
-roger



More information about the linux-arm-kernel mailing list