[PATCH 2/3] drm/tiny: ili9486: Do not assume 8-bit only SPI controllers

[Mark Brown]

On Fri, Nov 18, 2022 at 11:36:27AM +0100, Carlo Caione wrote:
> On 17/11/2022 15:59, Mark Brown wrote:

> > So this is an issue in the MIPI DBI code where the interpretation of the
> > buffer passed in depends on both the a caller parameter and the
> > capabilities of the underlying SPI controller, meaning that a driver can
> > suddenly become buggy when used with a new controller?

> The MIPI DBI code is fine, in fact it is doing the correct thing in the
> mipi_dbi_typec3_command() function. The problem is that the ILI9486
> driver is hijacking that function installing its own hook that is wrong.

Ah, I see - it's causing confusion because it peers into the
internals of the underlying code.

> The problem arrives when your controller does support 16-bits, so your
> data is not swapped, but you still put the data on the bus with 8-bit
> transfers.

Why would you need to use 8 bit transfers if the controller
supports 16 bits?
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 488 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20221118/d10950ba/attachment.sig>