[PATCH v4 1/4] Documentation: ti,tps6594: Add DT bindings for the TPS6594x PMIC

[Rob Herring]

On Fri, 18 Nov 2022 01:22:15 -0800, Matt Ranostay wrote:
> Add documentation for the TPS6594x PMIC including its RTC and GPIO
> functionalities.
> 
> Signed-off-by: Matt Ranostay <mranostay at ti.com>
> ---
>  .../devicetree/bindings/mfd/ti,tps6594.yaml   | 65 +++++++++++++++++++
>  1 file changed, 65 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/mfd/ti,tps6594.yaml
> 

My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check'
on your patch (DT_CHECKER_FLAGS is new in v5.13):

yamllint warnings/errors:

dtschema/dtc warnings/errors:
./Documentation/devicetree/bindings/mfd/ti,tps6594.yaml: $id: relative path/filename doesn't match actual path or filename
	expected: http://devicetree.org/schemas/mfd/ti,tps6594.yaml#
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/mfd/ti,tps6594.example.dtb: pmic at 48: gpio: Unevaluated properties are not allowed ('compatible' was unexpected)
	From schema: /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/mfd/ti,tps6594.yaml
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/mfd/ti,tps6594.example.dtb: pmic at 48: gpio:compatible:0: 'ti,tps6594x-gpio' was expected
	From schema: /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/mfd/ti,tps6594.yaml
Documentation/devicetree/bindings/mfd/ti,tps6594.example.dtb:0:0: /example-0/i2c0/pmic at 48/gpio: failed to match any schema with compatible: ['ti,tps6594-gpio']

doc reference errors (make refcheckdocs):

See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20221118092218.480147-2-mranostay@ti.com

This check can fail if there are any dependencies. The base for a patch
series is generally the most recent rc1.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit after running the above command.