[PATCH v5 3/8] arm64: dts: ti: k3-j721s2-mcu-wakeup: Add support of OSPI
Matt Ranostay
mranostay at ti.com
Fri Nov 18 02:01:14 PST 2022
On Wed, Nov 16, 2022 at 02:03:25PM +0530, Vaishnav Achath wrote:
>
>
> On 03/11/22 10:11, Matt Ranostay wrote:
> > From: Aswath Govindraju <a-govindraju at ti.com>
> >
> > Add support for two instance of OSPI in J721S2 SoC.
> >
> > Cc: Vignesh Raghavendra <vigneshr at ti.com>
> > Cc: Nishanth Menon <nm at ti.com>
> > Signed-off-by: Aswath Govindraju <a-govindraju at ti.com>
> > Signed-off-by: Matt Ranostay <mranostay at ti.com>
> > ---
> > .../boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi | 40 +++++++++++++++++++
> > 1 file changed, 40 insertions(+)
> >
> > diff --git a/arch/arm64/boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi
> > index 3264b8e8faea..034122be2ed5 100644
> > --- a/arch/arm64/boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi
> > +++ b/arch/arm64/boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi
> > @@ -306,4 +306,44 @@ cpts at 3d000 {
> > ti,cpts-periodic-outputs = <2>;
> > };
> > };
> > +
> > + fss: syscon at 47000000 {
> > + compatible = "syscon", "simple-mfd";
>
> Looks like the update here to add "ti,j721e-system-controller" compatible is in
> PATCH 6/8, it could have been in the same patch here instead of editing the same
> node again in the series.
>
Will fix in next revision.
- Matt
> > + reg = <0x0 0x47000000 0x0 0x100>;
> > + #address-cells = <2>;
> > + #size-cells = <2>;
> > + ranges;
> > +
> > + ospi0: spi at 47040000 {
> > + compatible = "ti,am654-ospi", "cdns,qspi-nor";
> > + reg = <0x00 0x47040000 0x00 0x100>,
> > + <0x5 0x0000000 0x1 0x0000000>;
> > + interrupts = <GIC_SPI 840 IRQ_TYPE_LEVEL_HIGH>;
> > + cdns,fifo-depth = <256>;
> > + cdns,fifo-width = <4>;
> > + cdns,trigger-address = <0x0>;
> > + clocks = <&k3_clks 109 5>;
> > + assigned-clocks = <&k3_clks 109 5>;
> > + assigned-clock-parents = <&k3_clks 109 7>;
> > + assigned-clock-rates = <166666666>;
> > + power-domains = <&k3_pds 109 TI_SCI_PD_EXCLUSIVE>;
> > + #address-cells = <1>;
> > + #size-cells = <0>;
> > + };
> > +
> > + ospi1: spi at 47050000 {
> > + compatible = "ti,am654-ospi", "cdns,qspi-nor";
> > + reg = <0x00 0x47050000 0x00 0x100>,
> > + <0x7 0x0000000 0x1 0x0000000>;
> > + interrupts = <GIC_SPI 841 IRQ_TYPE_LEVEL_HIGH>;
> > + cdns,fifo-depth = <256>;
> > + cdns,fifo-width = <4>;
> > + cdns,trigger-address = <0x0>;
> > + clocks = <&k3_clks 110 5>;
> > + power-domains = <&k3_pds 110 TI_SCI_PD_EXCLUSIVE>;
> > + #address-cells = <1>;
> > + #size-cells = <0>;
> > + };
> > +
> > + };
> > };
>
> Reviewed-by: Vaishnav Achath <vaishnav.a at ti.com>
>
> --
> Regards,
> Vaishnav
More information about the linux-arm-kernel
mailing list