[PATCH 1/3] dt-bindings: net: phy: dp83867: add LED mode property

[Tim Harvey]

Add description for new property ti,led-modes in binding file.

Signed-off-by: Tim Harvey <tharvey at gateworks.com>
---
 .../devicetree/bindings/net/ti,dp83867.yaml      |  6 ++++++
 include/dt-bindings/net/ti-dp83867.h             | 16 ++++++++++++++++
 2 files changed, 22 insertions(+)

diff --git a/Documentation/devicetree/bindings/net/ti,dp83867.yaml b/Documentation/devicetree/bindings/net/ti,dp83867.yaml
index b8c0e4b5b494..8b84c34d389f 100644
--- a/Documentation/devicetree/bindings/net/ti,dp83867.yaml
+++ b/Documentation/devicetree/bindings/net/ti,dp83867.yaml
@@ -118,6 +118,12 @@ properties:
       Transmitt FIFO depth- see dt-bindings/net/ti-dp83867.h for applicable
       values.
 
+  ti,led-modes:
+    description: |
+      List of LED modes - see dt-bindings/net/ti-dp83867.h for applicable
+      values.
+    $ref: schemas/types.yaml#/definitions/uint32-array
+
 required:
   - reg
 
diff --git a/include/dt-bindings/net/ti-dp83867.h b/include/dt-bindings/net/ti-dp83867.h
index 6fc4b445d3a1..ea3e17b27427 100644
--- a/include/dt-bindings/net/ti-dp83867.h
+++ b/include/dt-bindings/net/ti-dp83867.h
@@ -50,4 +50,20 @@
 #define DP83867_CLK_O_SEL_REF_CLK		0xC
 /* Special flag to indicate clock should be off */
 #define DP83867_CLK_O_SEL_OFF			0xFFFFFFFF
+
+/* LED_CFG - LED configuration selection */
+#define DP83867_LED_SEL_LINK			0
+#define DP83867_LED_SEL_ACT			1
+#define DP83867_LED_SEL_ACT_TX			2
+#define DP83867_LED_SEL_ACT_RX			3
+#define DP83867_LED_SEL_COL			4
+#define DP83867_LED_SEL_LINK_1000BT		5
+#define DP83867_LED_SEL_LINK_100BT		6
+#define DP83867_LED_SEL_LINK_10BT		7
+#define DP83867_LED_SEL_LINK_10_100BT		8
+#define DP83867_LED_SEL_LINK_100_1000BT		9
+#define DP83867_LED_SEL_FULL_DUPLEX		10
+#define DP83867_LED_SEL_LINK_ACT		11
+#define DP83867_LED_SEL_ERR_TX_RX		13
+#define DP83867_LED_SEL_ERR_RX			14
 #endif
-- 
2.25.1