[PATCH net] net: sparx5: fix error handling in sparx5_port_open()

[Liu Jian]

If phylink_of_phy_connect() fails, the port should be disabled.
If sparx5_serdes_set()/phy_power_on() fails, the port should be
disabled and the phylink should be stopped and disconnected.

Fixes: 946e7fd5053a ("net: sparx5: add port module support")
Fixes: f3cad2611a77 ("net: sparx5: add hostmode with phylink support")
Signed-off-by: Liu Jian <liujian56 at huawei.com>
---
 .../net/ethernet/microchip/sparx5/sparx5_netdev.c  | 14 ++++++++++++--
 1 file changed, 12 insertions(+), 2 deletions(-)

diff --git a/drivers/net/ethernet/microchip/sparx5/sparx5_netdev.c b/drivers/net/ethernet/microchip/sparx5/sparx5_netdev.c
index 19516ccad533..d078156581d5 100644
--- a/drivers/net/ethernet/microchip/sparx5/sparx5_netdev.c
+++ b/drivers/net/ethernet/microchip/sparx5/sparx5_netdev.c
@@ -104,7 +104,7 @@ static int sparx5_port_open(struct net_device *ndev)
 	err = phylink_of_phy_connect(port->phylink, port->of_node, 0);
 	if (err) {
 		netdev_err(ndev, "Could not attach to PHY\n");
-		return err;
+		goto err_connect;
 	}
 
 	phylink_start(port->phylink);
@@ -116,10 +116,20 @@ static int sparx5_port_open(struct net_device *ndev)
 			err = sparx5_serdes_set(port->sparx5, port, &port->conf);
 		else
 			err = phy_power_on(port->serdes);
-		if (err)
+		if (err) {
 			netdev_err(ndev, "%s failed\n", __func__);
+			goto out_power;
+		}
 	}
 
+	return 0;
+
+out_power:
+	phylink_stop(port->phylink);
+	phylink_disconnect_phy(port->phylink);
+err_connect:
+	sparx5_port_enable(port, false);
+
 	return err;
 }
 
-- 
2.17.1