[PATCH v8 06/17] dt-bindings: mfd: amd,pensando-elbasr: Add AMD Pensando Elba System Resource chip

[Krzysztof Kozlowski]

On 17/11/2022 01:41, Larson, Bradley wrote:
> [AMD Official Use Only - General]
> 
> From: Rob Herring <robh at kernel.org>
> Sent: Wednesday, November 16, 2022 2:30 PM
> 
>>> v8:
>>>  - Apply review request changes and picked the two unique examples
>>>    for the 4 chip-selects as one has the reset control support and
>>>    the other an interrupt.  Missed the --in-reply-to in git
>>>    send-email for v7, included in this update.
>>
>> No, you haven't. By default in git, you don't have to do anything. See
>> --thread and --no-chain-reply-to options. If you are messing with
>> --in-reply-to, you are doing it wrong.
>>
>> Please resend the whole series properly threaded.
> 
> Will resend the series
> 
>>> diff --git a/Documentation/devicetree/bindings/mfd/amd,pensando-elbasr.yaml b/Documentation/devicetree/bindings/mfd/amd,pensando-elbasr.yaml
>>> new file mode 100644
>>> index 000000000000..622c93402a86
>>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/mfd/amd,pensando-elbasr.yaml
>>> @@ -0,0 +1,60 @@
> ...
>>> +
>>> +title: AMD Pensando Elba SoC Resource Controller
>>> +
>>> +description: |
>>> +  AMD Pensando Elba SoC Resource Controller functions are
>>> +  accessed with four chip-selects.  Reset control is on CS0.
>>
>> One device with 4 chip-selects? Then I'd expect 'reg = <0 1 2 3>;'
>>
>> Hard to say more because I don't have the whole thread nor remember what
>> exactly we discussed before. That was 100s of bindings ago...
> 
> I agree and the example for v7 had all 4 chip-selects shown.  This is not a pick and
> choose device on what functions to use for a usable system.  Krzysztof requested
> only showing two chip-selects in the example.

The problem is that you describe here SPI controller (and its chip
selects) but binding is for the SPI device. The example is not the
problem...

> ...
>>> +examples:
>>> +  - |
>>> +    #include <dt-bindings/interrupt-controller/arm-gic.h>
>>> +
>>> +    spi {
>>> +        #address-cells = <1>;
>>> +        #size-cells = <0>;
>>> +        num-cs = <4>;

Drop this property as well, unless it is necessary to explain
"amd,pensando-elbasr" device.

>>> +
>>> +        system-controller at 0 {
>>> +            compatible = "amd,pensando-elbasr";
>>> +            reg = <0>;
>>> +            spi-max-frequency = <12000000>;
>>> +            #reset-cells = <1>;
>>> +        };

Best regards,
Krzysztof