[PATCH v2 2/5] clk: imx: replace osc_hdmi with dummy

Dario Binacchi dario.binacchi at amarulasolutions.com
Thu Nov 17 03:36:34 PST 2022


There is no occurrence of the hdmi oscillator in the reference manual
(document IMX8MNRM Rev 2, 07/2022). Further, if we consider the indexes
76-81 and 134 of the "Clock Root" table of chapter 5 of the RM, there is
no entry for the source select bits 101b, which is the setting referenced
by "osc_hdmi".
Fix by renaming "osc_hdmi" with "dummy", a clock which has already been
used for missing source select bits.

Tested on the BSH SystemMaster (SMM) S2 board.

Fixes: 96d6392b54dbb ("clk: imx: Add support for i.MX8MN clock driver")
Signed-off-by: Dario Binacchi <dario.binacchi at amarulasolutions.com>
---

(no changes since v1)

 drivers/clk/imx/clk-imx8mn.c | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)

diff --git a/drivers/clk/imx/clk-imx8mn.c b/drivers/clk/imx/clk-imx8mn.c
index 72f9563a0ff6..0fae97e61e2c 100644
--- a/drivers/clk/imx/clk-imx8mn.c
+++ b/drivers/clk/imx/clk-imx8mn.c
@@ -108,27 +108,27 @@ static const char * const imx8mn_disp_pixel_sels[] = {"osc_24m", "video_pll1_out
 						      "sys_pll3_out", "clk_ext4", };
 
 static const char * const imx8mn_sai2_sels[] = {"osc_24m", "audio_pll1_out", "audio_pll2_out",
-						"video_pll1_out", "sys_pll1_133m", "osc_hdmi",
+						"video_pll1_out", "sys_pll1_133m", "dummy",
 						"clk_ext3", "clk_ext4", };
 
 static const char * const imx8mn_sai3_sels[] = {"osc_24m", "audio_pll1_out", "audio_pll2_out",
-						"video_pll1_out", "sys_pll1_133m", "osc_hdmi",
+						"video_pll1_out", "sys_pll1_133m", "dummy",
 						"clk_ext3", "clk_ext4", };
 
 static const char * const imx8mn_sai5_sels[] = {"osc_24m", "audio_pll1_out", "audio_pll2_out",
-						"video_pll1_out", "sys_pll1_133m", "osc_hdmi",
+						"video_pll1_out", "sys_pll1_133m", "dummy",
 						"clk_ext2", "clk_ext3", };
 
 static const char * const imx8mn_sai6_sels[] = {"osc_24m", "audio_pll1_out", "audio_pll2_out",
-						"video_pll1_out", "sys_pll1_133m", "osc_hdmi",
+						"video_pll1_out", "sys_pll1_133m", "dummy",
 						"clk_ext3", "clk_ext4", };
 
 static const char * const imx8mn_sai7_sels[] = {"osc_24m", "audio_pll1_out", "audio_pll2_out",
-						"video_pll1_out", "sys_pll1_133m", "osc_hdmi",
+						"video_pll1_out", "sys_pll1_133m", "dummy",
 						"clk_ext3", "clk_ext4", };
 
 static const char * const imx8mn_spdif1_sels[] = {"osc_24m", "audio_pll1_out", "audio_pll2_out",
-						  "video_pll1_out", "sys_pll1_133m", "osc_hdmi",
+						  "video_pll1_out", "sys_pll1_133m", "dummy",
 						  "clk_ext2", "clk_ext3", };
 
 static const char * const imx8mn_enet_ref_sels[] = {"osc_24m", "sys_pll2_125m", "sys_pll2_50m",
-- 
2.32.0




More information about the linux-arm-kernel mailing list